High-quality Cu2O single crystals were grown in CuCl flux, utilizing an Al2O3 or MgO crucible and a slow-cooling technique. The resultant...

The incorporation of Si atoms into organic compounds significantly increases a variety of functionality, facilitating further application...

Rare-earth tritellurides are van-der-Waals antiferromagnets which have been attracting attention as materials not only with high mobility...

We performed inelastic neutron scattering (INS) experiments on KCu4P3O12 powder and compared the experimental results with those calculat...

Local hydrogen entry under a NaCl droplet on an Fe sheet was analyzed employing a hydrogenochromic sensor and electrochemical hydrogen pe...

This paper reports the fabrication of thin film batteries which are composed of three stacking layers; LiCoO2, Li3PO4, and Li. First, a L...

We investigated the optical properties of single crystals of one-dimensional van der Waals crystal Ta4SiTe4, which exhibited high thermoe...

The tunnel magnetoresistance (TMR) is one of the most important spintronic phenomena but its reduction at finite temperature is a severe ...

半導体バリアCuInSe2、CuGaSe2を持つ磁気トンネル接合の伝導特性を第一原理計算によって調べた。その結果、両トンネル接合でΔ1状態の波動関数のコヒーレントトンネル現象が生じ、高いMR比が得られることが分かった。

We theoretically study the tunnel magnetoresistance (TMR) effect in (111)-oriented junctions Co/MgO/Co(111) and Ni/MgO/Ni(111). The Co-ba...

We study the tunnel magnetoresistance (TMR) effect and magnetocrystalline anisotropy in a series of magnetic tunnel junctions (MTJs) with...

We theoretically study the tunnel magnetoresistance (TMR) effect in novel (111)-oriented magnetic tunnel junctions (MTJs) with SrTiO3 bar...

2つの半導体バリアを持つ磁気トンネル接合（Fe/CuInSe2/Fe及びFe/CuGaSe2/Fe）の磁気伝導特性に関し、第一原理計算に基づく詳細な解析を行った。本論文ではその結果について議論を行った。

In this work, the purpose of the current study is to understand the effects of time per layer and part geometry on microcracking behavior...

Here, electronic-grade phosphorus-doped n-type diamond epilayer with anatomically flat surface based on step-flow nucleation mode is fabr...

The development of superconducting joining technology for reacted magnesium diboride (MgB2) conductors remains a critical challenge for t...

The effect of intermediate layer densification on the critical current (Ic) of Bi-2223 superconducting joints was quantitatively studied....

A low circuit resistance is required for a superconducting magnet operated in persistent mode using superconducting joints. We performed ...

Low resistance and high critical current are prerequisites for superconducting joints used in persistent-mode magnets. Herein, we use a j...

Visualizing spin-polarized electronic states aids in designing and developing new materials and devices. Spin-resolved photoemission spec...

A symmetry-protected bound state in the continuum (BIC) is one of the bases for high-resolution photonic refractometric sensors that rely...

Photonic resonance modes can be spectrally coupled to the vibrational modes of molecules in the mid-infrared regime through interactions ...

The electrostatic potential distribution in materials and devices plays an important role in controlling the behaviors of charge carriers...

Solute segregation significantly affects material properties and is a critical issue in the laser powder-bed fusion (LPBF) additive manuf...

To investigate the relationship between the partial structures and the stiffness transition in AsxSe1−x glasses, anomalous X-ray scatteri...

Understanding disordered structure is difficult due to insufficient information in experimental data. Here we overcome this issue by usin...

The electrical current path of fullerene-derived films between microfabricated sharpened metal electrodes (gaps of 10–20 nm) was evaluate...

Thermodynamically metastable glasses that can contain metastable species are important functional materials. X-ray absorption near-edge s...

The precipitation behavior of M23C6 on random and coherent twin boundaries in aged 25Cr–20Ni–Nb–N steel was characterized. M23C6 on a ran...

鶏の骨を600℃の各時間で焼成することで、炭素分を制御したトリ骨炭を作製し、そのフッ化物イオン除去量を測定したところ、従来と反し、炭素量に応じてフッ化物イオン除去量が増加することが明らかとなった。一方焼成時間を長くすると一般に報告されているアパタイトの粒成長温度以下でも粒成...

A series of porous organic polymers based on a singlet oxygen generating oxoporphyinogen　(‘OxP’) has been successfully prepared from a ps...

Rechargeable magnesium batteries (RMBs) are promising large-scale stationary energy storage devices. A manufacturing system similar to th...

Understanding Li diffusion at the interfaces in solid-state Li batteries is essential to improving their performance (e.g., rate capabili...

Herein, we adopted surface engineering to address this issue by alleviating the passivation characteristics of reductive Mg electrodes. A...

Heterostructures of two-dimensional materials realise novel and enhanced physical phenomena, making them attractive research targets. Com...

This feature article explores the possibility of constructing advanced functional systems based on recent examples of layer-by-layer asse...

This review paper discusses the nanoarchitectonics of confined space, which is a field for controlling functional materials and molecular...

Unsupervised machine learning techniques have been combined with scanning transmission electron microscopy (STEM) to enable comprehensive...

We provide bulk transport evidence for twin-boundary pinning of vortices in FeSe. We measure interlayer resistance in FeSe in magnetic fi...

On-surface cyclodehydrogenation recently became an important reaction to planarize π-conjugated molecules and oligomers. However, the hig...

The design of magnetic topological states due to spin polarization in an extended π carbon system has great potential in spintronics appl...

On-surface synthesis is of importance to fabricate low dimensional carbon-based nanomaterials with atomic precision. Here, we synthesize ...