Article Planar-type SiGe thermoelectric generator with double cavity structure

S. Koike ; R. Yanagisawa ; L. Jalabert ; R. Anufriev ; M. Kurosawa ; T. Mori SAMURAI ORCID (National Institute for Materials ScienceROR) ; M. Nomura

Collection

Citation
S. Koike, R. Yanagisawa, L. Jalabert, R. Anufriev, M. Kurosawa, T. Mori, M. Nomura. Planar-type SiGe thermoelectric generator with double cavity structure. Applied Physics Letters. 2024, 124 (12), 123902. https://doi.org/10.48505/nims.4616
SAMURAI

Description:

(abstract)

Thermoelectric power generation is a promising technology that can directly convert thermal energy into electrical energy and is expected to be applied as power supplies for low-power electronic devices such as sensors. In particular, planar-type devices fabricated based on lithography processes not only enable significant device miniaturization and lower cost but also take advantage of materials with smaller dimensions, such as thin films and nanowires, which have attracted much attention in recent years. Silicon germanium (SiGe) is a promising thermoelectric material due to its relatively high power factor, low thermal conductivity, and compatibility with standard top-down fabrication process.
We design and fabricate a planar-type thermoelectric generator with a double cavity structure using a 240 nm thick Si0.8Ge0.2 thin film and report its performance improvement. When the temperature difference is applied to the device, the measured power density of 100 µWcm−2 was achieved at ∆T = 15 K, namely, the performance normalized by the applied temperature was 0.43 µWcm−2K−2. Finally, the dependence of the device performance on SiGe film thicknessis discussed. The results from our simulation show that a maximum performance of 1.75 µWcm−2K−2 can be achieved by the current device structure, indicating the potential for future applications as thermoelectric energy harvesters.

Rights:

Keyword: thermoelectric

Date published: 2024-03-18

Publisher: AIP Publishing

Journal:

  • Applied Physics Letters (ISSN: 00036951) vol. 124 issue. 12 123902

Funding:

  • Core Research for Evolutional Science and Technology JP-MJCR19Q3
  • JST-Mirai Program JPMJMI19A1
  • Japan Society for the Promotion of Science 21H04635

Manuscript type: Author's original (Submitted manuscript)

MDR DOI: https://doi.org/10.48505/nims.4616

First published URL: https://doi.org/10.1063/5.0191450

Related item:

Other identifier(s):

Contact agent:

Updated at: 2024-08-01 16:30:16 +0900

Published on MDR: 2024-08-01 16:30:16 +0900

Filename Size
Filename 2023_Koike_SiGe_TE_device_draft-TM-初期投稿.pdf (Thumbnail)
application/pdf
Size 9.11 MB Detail