Download file (3.4 MB)
Download as zip (3.31 MB)

Collection

Citation

Description:

Spark plasma sintering of TiB2–boron ceramics using commercially available raw powders is reported. The B4C phase developed during reaction-driven consolidation at 1900 °C. The newly formed grains were located at the grain junctions and the triple point of TiB2 grains, forming a covalent and stiff skeleton of B4C. The flexural strength of the TiB2–10 wt.% boron ceramic composites reached 910 MPa at room temperature and 1105 MPa at 1600 °С. Which is the highest strength reported for non-oxide ceramics at 1600 °C. This was followed by a rapid decrease at 1800 °C to 480–620 MPa, which was confirmed by increased number of cavitated titanium diboride grains observed after flexural strength tests.

Rights:

• Creative Commons BY-NC-ND Attribution-NonCommercial-NoDerivs 4.0 International
  

Keyword: spark plasma sintering, titanium diboride, amorphous boron, high-temperature strength.

Date published: 2016-08-11

Publisher: ELSEVIER SCI LTD

Journal:

• JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (ISSN: 09552219) vol. 37 issue. 1 p. 393-397

Funding:

• JSPS Grant-in-Aid for Scientific Research B (No.15H04163)

Manuscript type: Author's version (Accepted manuscript)

MDR DOI: https://doi.org/10.48505/nims.5503

First published URL: https://doi.org/10.1016/j.jeurceramsoc.2016.08.009

Related item:

Other identifier(s):

Contact agent:

Updated at: 2025-05-26 12:30:29 +0900

Published on MDR: 2025-05-26 12:23:53 +0900