Search Constraints
« Previous |
1 - 100 of 861
|
Next »
Search Results
Select an image to start the slideshow
Wavy Graphene-Like Network Forming during Pyrolysis of Polyacrylonitrile into Carbon Fiber
1 of 100
Resistance Switch in a Minimal-Fullerene Chain in Vertically Stacked Electrodes
2 of 100
Plasma-free dry etching of (001) β-Ga2O3 substrates by HCl gas
3 of 100
Element-selective structural visualization for the oxygen-induced surface of Nb(110)
4 of 100
Toward Improved Anodic Stability of Ether-Based Electrolytes for Rechargeable Magnesium Batteries
5 of 100
Mechanically Tough Micellar Cubic Liquid‐Crystalline Polymer Electrolytes for Electromechanical Actuators
6 of 100
Near-infrared imaging of heat transfer behavior between gadolinium and fluid during magnetization/demagnetization process of magnetocaloric effect
7 of 100
Quantum Annealing Optimization Method for the Design of Barrier Materials in Magnetic Tunnel Junctions
8 of 100
Designing composition ratio of magnetic alloy multilayer for transverse thermoelectric conversion by Bayesian optimization
9 of 100
Theoretical study of the effect of lattice dynamics on the damping constant of FePt at finite temperature
10 of 100
First-Principles Studies on Spin-Dependent Transport of Magnetic Junctions with Half-Metallic Heusler Compounds
11 of 100
Observation of nonvolatile magneto-thermal switching in superconductors
12 of 100
Solid polymer electrolyte-based atomic switches: from materials to mechanisms and applications
13 of 100
Effect of Si addition on epitaxial growth and gas sensing properties of tungsten oxide films
14 of 100
Solution‐Processed Perovskite Quantum Dot Quasi‐BIC Laser from Miniaturized Low‐Lateral‐Loss Cavity
15 of 100
Effect of Alloying Elements on the High-Temperature Yielding Behavior of Multicomponent γ′-L12 Alloys
16 of 100
Large anomalous Hall effect in spin fluctuating devil’s staircase
17 of 100
Crystal Electric Field Level Scheme Behind Giant Magnetocaloric Effect for Hydrogen Liquefaction
18 of 100
Ultrahigh Responsivity of Diamond-based Solar-blind Photodetectors Using Hydrogen Plasma Treatment
19 of 100
Zero-magnetic-field operation of ordinary-Nernst-effect-based transverse thermoelectric module using embedded permanent magnets
20 of 100
Bulk-edge correspondence in open photonic systems
21 of 100
Direct observation of the atomic density fluctuation originating from the first sharp diffraction peak in SiO2 glass
22 of 100
Degenerate spontaneous parametric down-conversion in nonlinear metasurfaces
23 of 100
Enhanced orbital torque efficiency in nonequilibrium Ru50Mo50(0001) alloy epitaxial thin films
24 of 100
A new class of crystalline X-ray induced photochromic materials assembled from anion-directed folding of a flexible cation
25 of 100
Emitted secondary Electrons: In vacuo plasmon energy gain observation using a Three-Point probe method
26 of 100
Crystal electric field leading to giant magnetocaloric effect for hydrogen liquefaction
27 of 100
Alkyl–π Functional Molecular Gels: Control of Elastic Modulus and Improvement of Electret Performance
28 of 100
Mode Ⅰ–Governed fracture energy and maximum normal traction of a CFRP rod
29 of 100
Molecular machines working at interfaces: physics, chemistry, evolution and nanoarchitectonics
30 of 100
Stroboscopic time-of-flight neutron diffraction in long pulsed magnetic fields
31 of 100
Impacts of vacancy complexes on the room-temperature photoluminescence lifetime of state-of-the-art GaN substrates, epitaxial layers, and Mg-implanted layers
32 of 100
The Energy Level Alignment at the Buffer/Cu(In,Ga)Se<sub>2</sub> Thin‐Film Solar Cell Interface for CdS and GaO<sub>x</sub>
33 of 100
Face-on-oriented formation of bis(diimino)metal coordination nanosheets on gold electrodes by electrochemical oxidation
34 of 100
Metal–organic framework adhesives with exceptionally high heat resistance
35 of 100
Iodonium-based pro-adhesive layers for robust adhesion of PEDOT:PSS to surfaces
36 of 100
Alkyl anchor–modified artificial viral capsid budding outside-to-inside and inside-to-outside giant vesicles
37 of 100
Robust Preparation of Sub‐20‐nm‐Thin Lamellae for Aberration‐Corrected Electron Microscopy
38 of 100
Two displacive ferroelectric phase transitions in multiferroic quadruple perovskite
<mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:mrow><mml:mi>Bi</mml:mi><mml:msub><mml:mi mathvariant="normal">Mn</mml:mi><mml:mn>7</mml:mn></mml:msub><mml:msub><mml:mi mathvariant="normal">O</mml:mi><mml:mn>12</mml:mn></mml:msub></mml:mrow></mml:math>
39 of 100
Polarity Does Not Matter: Molecular Weight Reverses the Photoisomerization-Induced Phase Separation of an Azobenzene-Bearing Polymer
40 of 100
Peculiar microstructural evolution and hardness variation depending on laser powder bed fusion-manufacturing condition in Ti–6Al–2Sn–4Zr–6Mo
41 of 100
Surface charge-dependent cytokine production using near-infrared emitting silicon quantum dots
42 of 100
Rational ligand design for enhanced carrier mobility in self-powered SWIR photodiodes based on colloidal InSb quantum dots
43 of 100
Influence of the Charge Ratio of Guanine-Quadruplex Structure-Based CpG Oligodeoxynucleotides and Cationic DOTAP Liposomes on Cytokine Induction Profiles
44 of 100
Study of device characteristics of intrinsic Josephson junction terahertz emitters related to annealing conditions of the crystals
45 of 100
Cu2O single crystal growth using CuCl flux and bandgap evaluation
46 of 100
On‐Surface Synthesis of Silole and Disila‐Cyclooctene Derivatives
47 of 100
Near‐Field Photodetection in Direction Tunable Surface Plasmon Polaritons Waveguides Embedded with Graphene
48 of 100
Terahertz electric-field-driven dynamical multiferroicity in SrTiO3
49 of 100
Development of a Photoemission Microscopy Apparatus Using a Vacuum Ultraviolet Laser
50 of 100
Comparative Studies on [B(HFIP)<sub>4</sub>]-Based Electrolytes with Mono- and Divalent Cations
51 of 100
The Effect of Li Ion and Anion Supply on Li Dissolution/Deposition Behavior in LiNO3 Electrolyte Solutions for Li-Air Batteries
52 of 100
Formation of a zirconium oxide crystal nucleus in the initial nucleation stage in aluminosilicate glass investigated by X-ray multiscale analysis
53 of 100
Development of p-type Ion Implantation Technique for Realization of GaN Vertical MOSFETs
54 of 100
Magnetotransport properties in van der Waals
<mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:mrow><mml:mi>R</mml:mi><mml:msub><mml:mi>Te</mml:mi><mml:mn>3</mml:mn></mml:msub></mml:mrow></mml:math>
<mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:mo>(</mml:mo><mml:mi>R</mml:mi><mml:mo>=</mml:mo><mml:mi>La</mml:mi><mml:mo>,</mml:mo><mml:mo> </mml:mo><mml:mi>Ce</mml:mi><mml:mo>,</mml:mo><mml:mo> </mml:mo><mml:mi>Tb</mml:mi><mml:mo>)</mml:mo></mml:math>
55 of 100
Inelastic neutron scattering studies on the eight-spin zigzag-chain compound <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:mrow><mml:msub><mml:mi>KCu</mml:mi><mml:mn>4</mml:mn></mml:msub><mml:msub><mml:mi mathvariant="normal">P</mml:mi><mml:mn>3</mml:mn></mml:msub><mml:msub><mml:mi mathvariant="normal">O</mml:mi><mml:mn>12</mml:mn></mml:msub></mml:mrow></mml:math>: Confirmation of the validity of a data-driven technique based on machine learning
56 of 100
Effects of the Cr and Ni concentrations on the fatigue and corrosion resistances of Fe−Mn−Cr−Ni−Si alloys for seismic damping applications
57 of 100
Mechanism of local hydrogen entry into Fe sheets induced by atmospheric corrosion: Significance of potential, pH, and rust layer thickness
58 of 100
Fabrication of thin-film batteries composed of LiCoO2, Li3PO4, and Li layers
59 of 100
Growth dynamics of selective-area-grown rutile-type SnO2 on TiO2 (110) substrate
60 of 100
Multiscale Finite Element Analysis of Yield-point Phenomenon in Ferrite–Pearlite Duplex Steels
61 of 100
Minimal-surface-based multiphase metamaterials with highly variable stiffness
62 of 100
Multi-objective topology optimization of porous microstructure in die-bonding layer of a semiconductor
63 of 100
Mechanical Properties, Tissue Structure, and Elemental Composition of the Walking Leg Tips of Coconut Crabs
64 of 100
Anisotropic optical conductivity accompanied by a small energy gap in the one-dimensional thermoelectric telluride <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:mrow><mml:msub><mml:mi mathvariant="normal">Ta</mml:mi><mml:mn>4</mml:mn></mml:msub><mml:msub><mml:mi>SiTe</mml:mi><mml:mn>4</mml:mn></mml:msub></mml:mrow></mml:math>
65 of 100
Crucial role of interfacial <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:mrow><mml:mi>s</mml:mi><mml:mtext>−</mml:mtext><mml:mi>d</mml:mi></mml:mrow></mml:math> exchange interaction in the temperature dependence of tunnel magnetoresistance
66 of 100
Bias voltage effects on tunneling magnetoresistance in Fe/MgAl2O4/Fe(001) junctions: Comparative study with Fe/MgO/Fe(001) junctions
67 of 100
First-principles study of the anisotropic magneto-Peltier effect
68 of 100
First-principles study on magnetic tunneling junctions with semiconducting CuInSe2and CuGaSe2barriers
69 of 100
Giant interfacial perpendicular magnetic anisotropy in Fe/CuIn1−xGaxSe2 beyond Fe/MgO
70 of 100
Interface-driven giant tunnel magnetoresistance in (111)-oriented junctions
71 of 100
Interfacial giant tunnel magnetoresistance and bulk-induced large perpendicular magnetic anisotropy in (111)-oriented junctions with fcc ferromagnetic alloys: A first-principles study
72 of 100
Perpendicular magnetic anisotropy at the Fe/MgAl2O4 interface: Comparative first-principles study with Fe/MgO
73 of 100
Band-folding-driven high tunnel magnetoresistance ratios in (111)-oriented junctions with <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:msub><mml:mi>SrTiO</mml:mi><mml:mn>3</mml:mn></mml:msub></mml:math> barriers
74 of 100
Theoretical Study on Magnetic Tunneling Junctions with Semiconductor Barriers CuInSe<sub>2</sub> and CuGaSe<sub>2</sub> Including a Detailed Analysis of Band-Resolved Transmittances
75 of 100
Effects of time per layer and part geometry on thermal history and microcracking in the fabrication of nickel superalloy samples by laser powder bed fusion
76 of 100
Exotic magnetism in perovskite KOsO3
77 of 100
Pt/GaN Schottky barrier height lowering by incorporated hydrogen
78 of 100
High‐Temperature and High‐Electron Mobility Metal‐Oxide‐Semiconductor Field‐Effect Transistors Based on N‐Type Diamond
79 of 100
Recent Progress in Controlled Nanostructure of Colloidal Nanocrystal Powders for Efficient Light Emission
80 of 100
Chemical-substitution-driven giant anomalous Hall and Nernst effects in magnetic cubic Heusler compounds
81 of 100
Heat Source Model Development for Thermal Analysis of Laser Powder Bed Fusion Using Bayesian Optimization and Machine Learning
82 of 100
Superconducting joints using reacted multifilament MgB2 wires: A technology toward cryogen-free MRI magnets
83 of 100
Approach to Low Contact Resistance Formation on Buried Interface in Oxide Thin-Film Transistors: Utilization of Palladium-Mediated Hydrogen Pathway
84 of 100
Critical current improvement and resistance evaluation of superconducting joint between Bi2223 tapes
85 of 100
Development of a Persistent Current Mode 9.39 T (400 MHz) LTS/Bi-2223 NMR Magnet With a Bi-2223 Superconducting Joint
86 of 100
Review of the temporal stability of the magnetic field for ultra-high field superconducting magnets with a particular focus on superconducting joints between HTS conductors
87 of 100
Consideration of Magnetic Flux Distribution in Multi−Filamented YBa<sub>2</sub>Cu<sub>3</sub>O<sub>7−δ</sub> Films by Controlling Crystal Array Using Surface−Modified Substrate
88 of 100
The effect of intermediate layer densification on the critical current of a Bi-2223 superconducting joint
89 of 100
Interpretation of time-dependent current and resistance of HTS closed loop with superconducting joint considering flux creep
90 of 100
Angular Dependence of Critical Current and Grain Alignment in Bi-2223 Superconducting Joint
91 of 100
Angular dependence of resistance and critical current of a Bi-2223 superconducting joint
92 of 100
Particle Size Effect on Powder Packing Properties and Molten Pool Dimensions in Laser Powder Bed Fusion Simulation
93 of 100
Biofabrication of engineered blood vessels for biomedical applications
94 of 100
Mechanical control of molecular machines at an air–water interface: manipulation of molecular pliers, paddles
95 of 100
Visualization of spin-polarized electronic states by imaging-type spin-resolved photoemission microscopy
96 of 100
Optimum asymmetry for nanofabricated refractometric sensors at quasi-bound states in the continuum
97 of 100
Vibrational Coupling to Quasi‐Bound States in the Continuum under Tailored Coupling Conditions
98 of 100
Quantitative characterization of built-in potential profile across GaAs p–n junctions using Kelvin probe force microscopy with qPlus sensor AFM
99 of 100
Prominently enhanced luminescence from a continuous monolayer of transition metal dichalcogenide on all-dielectric metasurfaces
100 of 100