Search Constraints
« Previous |
1 - 100 of 537
|
Next »
Search Results
Select an image to start the slideshow
Robust Preparation of Sub‐20‐nm‐Thin Lamellae for Aberration‐Corrected Electron Microscopy
1 of 100
Two displacive ferroelectric phase transitions in multiferroic quadruple perovskite
<mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:mrow><mml:mi>Bi</mml:mi><mml:msub><mml:mi mathvariant="normal">Mn</mml:mi><mml:mn>7</mml:mn></mml:msub><mml:msub><mml:mi mathvariant="normal">O</mml:mi><mml:mn>12</mml:mn></mml:msub></mml:mrow></mml:math>
2 of 100
Polarity Does Not Matter: Molecular Weight Reverses the Photoisomerization-Induced Phase Separation of an Azobenzene-Bearing Polymer
3 of 100
Peculiar microstructural evolution and hardness variation depending on laser powder bed fusion-manufacturing condition in Ti–6Al–2Sn–4Zr–6Mo
4 of 100
Surface charge-dependent cytokine production using near-infrared emitting silicon quantum dots
5 of 100
Rational ligand design for enhanced carrier mobility in self-powered SWIR photodiodes based on colloidal InSb quantum dots
6 of 100
Influence of the Charge Ratio of Guanine-Quadruplex Structure-Based CpG Oligodeoxynucleotides and Cationic DOTAP Liposomes on Cytokine Induction Profiles
7 of 100
Study of device characteristics of intrinsic Josephson junction terahertz emitters related to annealing conditions of the crystals
8 of 100
Cu2O single crystal growth using CuCl flux and bandgap evaluation
9 of 100
On‐Surface Synthesis of Silole and Disila‐Cyclooctene Derivatives
10 of 100
Near‐Field Photodetection in Direction Tunable Surface Plasmon Polaritons Waveguides Embedded with Graphene
11 of 100
Terahertz electric-field-driven dynamical multiferroicity in SrTiO3
12 of 100
Development of a Photoemission Microscopy Apparatus Using a Vacuum Ultraviolet Laser
13 of 100
Comparative Studies on [B(HFIP)<sub>4</sub>]-Based Electrolytes with Mono- and Divalent Cations
14 of 100
The Effect of Li Ion and Anion Supply on Li Dissolution/Deposition Behavior in LiNO3 Electrolyte Solutions for Li-Air Batteries
15 of 100
Formation of a zirconium oxide crystal nucleus in the initial nucleation stage in aluminosilicate glass investigated by X-ray multiscale analysis
16 of 100
Magnetotransport properties in van der Waals
<mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:mrow><mml:mi>R</mml:mi><mml:msub><mml:mi>Te</mml:mi><mml:mn>3</mml:mn></mml:msub></mml:mrow></mml:math>
<mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:mo>(</mml:mo><mml:mi>R</mml:mi><mml:mo>=</mml:mo><mml:mi>La</mml:mi><mml:mo>,</mml:mo><mml:mo> </mml:mo><mml:mi>Ce</mml:mi><mml:mo>,</mml:mo><mml:mo> </mml:mo><mml:mi>Tb</mml:mi><mml:mo>)</mml:mo></mml:math>
17 of 100
Inelastic neutron scattering studies on the eight-spin zigzag-chain compound <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:mrow><mml:msub><mml:mi>KCu</mml:mi><mml:mn>4</mml:mn></mml:msub><mml:msub><mml:mi mathvariant="normal">P</mml:mi><mml:mn>3</mml:mn></mml:msub><mml:msub><mml:mi mathvariant="normal">O</mml:mi><mml:mn>12</mml:mn></mml:msub></mml:mrow></mml:math>: Confirmation of the validity of a data-driven technique based on machine learning
18 of 100
Effects of the Cr and Ni concentrations on the fatigue and corrosion resistances of Fe−Mn−Cr−Ni−Si alloys for seismic damping applications
19 of 100
Mechanism of local hydrogen entry into Fe sheets induced by atmospheric corrosion: Significance of potential, pH, and rust layer thickness
20 of 100
Fabrication of thin-film batteries composed of LiCoO2, Li3PO4, and Li layers
21 of 100
Growth dynamics of selective-area-grown rutile-type SnO2 on TiO2 (110) substrate
22 of 100
Multiscale Finite Element Analysis of Yield-point Phenomenon in Ferrite–Pearlite Duplex Steels
23 of 100
Minimal-surface-based multiphase metamaterials with highly variable stiffness
24 of 100
Multi-objective topology optimization of porous microstructure in die-bonding layer of a semiconductor
25 of 100
Mechanical Properties, Tissue Structure, and Elemental Composition of the Walking Leg Tips of Coconut Crabs
26 of 100
Anisotropic optical conductivity accompanied by a small energy gap in the one-dimensional thermoelectric telluride <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:mrow><mml:msub><mml:mi mathvariant="normal">Ta</mml:mi><mml:mn>4</mml:mn></mml:msub><mml:msub><mml:mi>SiTe</mml:mi><mml:mn>4</mml:mn></mml:msub></mml:mrow></mml:math>
27 of 100
Crucial role of interfacial <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:mrow><mml:mi>s</mml:mi><mml:mtext>−</mml:mtext><mml:mi>d</mml:mi></mml:mrow></mml:math> exchange interaction in the temperature dependence of tunnel magnetoresistance
28 of 100
Bias voltage effects on tunneling magnetoresistance in Fe/MgAl2O4/Fe(001) junctions: Comparative study with Fe/MgO/Fe(001) junctions
29 of 100
First-principles study of the anisotropic magneto-Peltier effect
30 of 100
First-principles study on magnetic tunneling junctions with semiconducting CuInSe2and CuGaSe2barriers
31 of 100
Giant interfacial perpendicular magnetic anisotropy in Fe/CuIn1−xGaxSe2 beyond Fe/MgO
32 of 100
Interface-driven giant tunnel magnetoresistance in (111)-oriented junctions
33 of 100
Interfacial giant tunnel magnetoresistance and bulk-induced large perpendicular magnetic anisotropy in (111)-oriented junctions with fcc ferromagnetic alloys: A first-principles study
34 of 100
Perpendicular magnetic anisotropy at the Fe/MgAl2O4 interface: Comparative first-principles study with Fe/MgO
35 of 100
Band-folding-driven high tunnel magnetoresistance ratios in (111)-oriented junctions with <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:msub><mml:mi>SrTiO</mml:mi><mml:mn>3</mml:mn></mml:msub></mml:math> barriers
36 of 100
Theoretical Study on Magnetic Tunneling Junctions with Semiconductor Barriers CuInSe<sub>2</sub> and CuGaSe<sub>2</sub> Including a Detailed Analysis of Band-Resolved Transmittances
37 of 100
Effects of time per layer and part geometry on thermal history and microcracking in the fabrication of nickel superalloy samples by laser powder bed fusion
38 of 100
Exotic magnetism in perovskite KOsO3
39 of 100
Pt/GaN Schottky barrier height lowering by incorporated hydrogen
40 of 100
High‐Temperature and High‐Electron Mobility Metal‐Oxide‐Semiconductor Field‐Effect Transistors Based on N‐Type Diamond
41 of 100
Recent Progress in Controlled Nanostructure of Colloidal Nanocrystal Powders for Efficient Light Emission
42 of 100
Chemical-substitution-driven giant anomalous Hall and Nernst effects in magnetic cubic Heusler compounds
43 of 100
Heat Source Model Development for Thermal Analysis of Laser Powder Bed Fusion Using Bayesian Optimization and Machine Learning
44 of 100
Superconducting joints using reacted multifilament MgB2 wires: A technology toward cryogen-free MRI magnets
45 of 100
Approach to Low Contact Resistance Formation on Buried Interface in Oxide Thin-Film Transistors: Utilization of Palladium-Mediated Hydrogen Pathway
46 of 100
Critical current improvement and resistance evaluation of superconducting joint between Bi2223 tapes
47 of 100
Development of a Persistent Current Mode 9.39 T (400 MHz) LTS/Bi-2223 NMR Magnet With a Bi-2223 Superconducting Joint
48 of 100
Review of the temporal stability of the magnetic field for ultra-high field superconducting magnets with a particular focus on superconducting joints between HTS conductors
49 of 100
Consideration of Magnetic Flux Distribution in Multi−Filamented YBa<sub>2</sub>Cu<sub>3</sub>O<sub>7−δ</sub> Films by Controlling Crystal Array Using Surface−Modified Substrate
50 of 100
The effect of intermediate layer densification on the critical current of a Bi-2223 superconducting joint
51 of 100
Interpretation of time-dependent current and resistance of HTS closed loop with superconducting joint considering flux creep
52 of 100
Angular Dependence of Critical Current and Grain Alignment in Bi-2223 Superconducting Joint
53 of 100
Angular dependence of resistance and critical current of a Bi-2223 superconducting joint
54 of 100
Particle Size Effect on Powder Packing Properties and Molten Pool Dimensions in Laser Powder Bed Fusion Simulation
55 of 100
Biofabrication of engineered blood vessels for biomedical applications
56 of 100
Mechanical control of molecular machines at an air–water interface: manipulation of molecular pliers, paddles
57 of 100
Visualization of spin-polarized electronic states by imaging-type spin-resolved photoemission microscopy
58 of 100
Optimum asymmetry for nanofabricated refractometric sensors at quasi-bound states in the continuum
59 of 100
Vibrational Coupling to Quasi‐Bound States in the Continuum under Tailored Coupling Conditions
60 of 100
Quantitative characterization of built-in potential profile across GaAs p–n junctions using Kelvin probe force microscopy with qPlus sensor AFM
61 of 100
Prominently enhanced luminescence from a continuous monolayer of transition metal dichalcogenide on all-dielectric metasurfaces
62 of 100
Solute segregation in a rapidly solidified Hastelloy-X Ni-based superalloy during laser powder bed fusion investigated by phase-field and computational thermal-fluid dynamics simulations
63 of 100
Lead‐Free Halide Perovskite Materials and Optoelectronic Devices: Progress and Prospective
64 of 100
Quantitative Characterization by Transmission Electron Microscopy and Its Application to Interfacial Phenomena in Crystalline Materials
65 of 100
Local- and Intermediate-range Partial Structure Study of As–Se Glasses
66 of 100
Atomic and Electronic Structures on a Mordenite Zeolite
67 of 100
Siliceous zeolite-derived topology of amorphous silica
68 of 100
Atomic and Electronic Structure in MgO–SiO<sub>2</sub>
69 of 100
Microstructure and thermoelectric properties of pristine and Al-doped ZnO ceramics fabricated by cost-effective and eco-friendly wet chemistry methods
70 of 100
Microgravity effects on nonequilibrium melt processing of neodymium titanate: thermophysical properties, atomic structure, glass formation and crystallization
71 of 100
Experiment and Simulation on Mechanical Behavior in 1/2-Scale Demonstration REBCO Coil System of Skeleton Cyclotron for Cancer Therapy
72 of 100
Heating rate dependence of coercivity and microstructure of Fe–B–P–Cu nanocrystalline soft magnetic materials
73 of 100
Effective Conduction Path of a C<sub>60</sub> Chain in a Nanogap Electrode
74 of 100
Ferroic order for anisotropic magnetic dipole term in collinear antiferromagnets of (t2g)4 system
75 of 100
Combinatorial characterization of metastable luminous silver cations
76 of 100
Influence of Electrical Polarization on Thrombogenicity of Titania Nanotubes
77 of 100
Analysis of Structure and Function of Ladybird Leg and Subsequent Design and Fabrication of a Simplified Leg Structure for Robotic Applications
78 of 100
Tailoring photodetection performance of selfpowered Ga2O3 UV solar-blind photodetectors through asymmetric electrodes
79 of 100
Oxygen on-site Coulomb energy in Pr1.3−xLa0.7CexCuO4 and Bi2Sr2CaCu2O8+δ and its relation with Heisenberg exchange
80 of 100
Hydrogen-triggered metal filament rupture in Cu-based resistance switches
81 of 100
Er-driven incommensurate to commensurate magnetic phase transition of Fe in the spin-chain compound <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:msub><mml:mi>BaErFeO</mml:mi><mml:mn>4</mml:mn></mml:msub></mml:math>
82 of 100
Design and Observation of Topological Band Gaps and Edge Modes of SOI Photonic Crystal Slabs in the Mid-Infrared Range
83 of 100
Cell-derived nanomaterials for biomedical applications
84 of 100
Precipitation behavior of the M23C6 phase on the coherent twin boundary of 25Cr-20Ni-Nb-N steel
85 of 100
Influences of combined supplementation of calcium citrate and calcium carbonate on injectable and anti-washout hydroxyapatite/collagen bone paste utilizing sodium alginate
86 of 100
Development of novel bone‐like nanocomposite coating of hydroxyapatite/collagen on titanium by modified electrophoretic deposition
87 of 100
Changes in fluoride removal ability of chicken bone char with changes in calcination time
88 of 100
Developments of calcium phosphate-based bone regenerating materials utilizing interfacial interactions between inorganic–organic substances
89 of 100
Constancy of the quadrupolar interaction product in nanocrystalline gallium nitride revealed by 71Ga MAS NMR shift distribution
90 of 100
Self-healing and shape-memory polymers based on cellulose acetate matrix
91 of 100
Mild selective photochemical oxidation of an organic sulfide using OxP-polyimide porous polymers as singlet oxygen generators
92 of 100
Fabrication of Gentamicin-Loaded Hydroxyapatite/Collagen Bone-Like Nanocomposite for Anti-Infection Bone Void Fillers
93 of 100
Ion-pairing assemblies of π-extended anion-responsive organoplatinum complexes
94 of 100
Linear response theories for interatomic exchange interactions
95 of 100
Preparation of anti-decay self-setting pastes of hydroxyapatite/collagen utilizing (3-glycidoxypropyl)trimethoxysilane
96 of 100
Validity check of easy-to-use torsion test method for bioceramics
97 of 100
Preparation of injectable hydroxyapatite/collagen paste using sodium alginate and influence of additives
98 of 100
Regulating the trap distribution of ZnGa2O4:Cr3+ by Li+ /Ga3+ doping for upconversion-like trap energy transfer NIR persistent luminescence
99 of 100
Identification of Multiple Cs+ Adsorption Sites in a Hydroxy-interlayered Vermiculite-like Layered Silicate through 133Cs MAS NMR Analysis
100 of 100