16 records found.
Phase composition and magnetic properties of Nd(Pr)2Fe14B and (Sm,Zr)Fe11Ti magnets produced by selective laser melting
- Conference poster
- Collection
- The 28th International Workshop on Rare Earth and Future Permanent Magnets and Their Applications (REPM2025)
- Creator
-
;Sergey Andreev (author) (Search by this author)Ural Federal University, Russia;Viktoria Maltseva (author) (Search by this author)Ural Federal University, Russia;Dmitriy Neznakhin (author) (Search by this author)Ural Federal University, Russia;Arkadiy Shalaginov (author) (Search by this author)Ural Federal University, Russia;Andrey Urzhumtsev (author) (Search by this author)Ural Federal University, RussiaAlexey Volegov (author) (Search by this author)Ural Federal University, Russia
- Keyword
- REPM2025, Additive manufacturing, Selective laser melting, Permanent magnets, Phase composition, Microstructure
- Date published
- Updated at
- 2025-09-11 16:30:51 +0900
In-Depth investigation of the sub-micronic equiaxed grain microstructure of a NdFeB permanent magnet fabricated by Laser Powder Bed Fusion
- Conference presentation
- Collection
- The 28th International Workshop on Rare Earth and Future Permanent Magnets and Their Applications (REPM2025)
- Creator
-
;Aymeric Wolz (author) (Search by this author)CEA (French Alternative Energies and Atomic Energy Commission), France;Jean-Paul Garandet (author) (Search by this author)CEA (French Alternative Energies and Atomic Energy Commission), France;Camille Flament (author) (Search by this author)CEA (French Alternative Energies and Atomic Energy Commission), FranceOlivier Tosoni (author) (Search by this author)CEA (French Alternative Energies and Atomic Energy Commission), France
- Keyword
- REPM2025, Laser Powder Bed Fusion (LPBF), Additive manufacturing, NdFeB, Microstructure investigation, Columnar to equiaxed transition (CET)
- Date published
- Updated at
- 2025-09-11 16:31:28 +0900
Effect of nanoscale cellular structure on the mechanical properties of Inconel 718 with unique hierarchical structure fabricated by laser powder bed fusion
- Journal article
- Creator
-
;Ken Cho (author) (Search by this author);Kippei Yamashita (author) (Search by this author);Shinnosuke Kakutani (author) (Search by this author)Takuma Saito (author) (Search by this author)
https://orcid.org/0000-0001-9537-5072
(unauthenticated)
National Institute for Materials Science
;
Taisuke Sasaki (author) (Search by this author)National Institute for Materials Science
;
;Katsuhiko Sawaizumi (author) (Search by this author);Masayuki Okugawa (author) (Search by this author);Yuichiro Koizumi (author) (Search by this author);Tsuyoshi Mayama (author) (Search by this author);Taichi Kikukawa (author) (Search by this author);Ozkan Gokcekaya (author) (Search by this author);Takuya Ishimoto (author) (Search by this author);Hajime Kimizuka (author) (Search by this author);Wu Gong (author) (Search by this author);Takuro Kawasaki (author) (Search by this author);Stefanus Harjo (author) (Search by this author);Takayoshi Nakano (author) (Search by this author)Hiroyuki Y. Yasuda (author) (Search by this author) - Keyword
- Additive manufacturing, Nickel superalloys, Crystallographic texture, Cellular structure, Strengthening mechanism, Neutron diffraction
- Date published
- 2025-11-02
- Updated at
- 2026-01-05 14:55:20 +0900
Controllable inverse design of auxetic metamaterials using deep learning
- Journal article
- Creator
-
;Xiaoyang Zheng (author) (Search by this author);Ta-Te Chen (author) (Search by this author)National Institute for Materials Science;Xiaofeng Guo (author) (Search by this author)Sadaki Samitsu (author) (Search by this author)National Institute for Materials Science
;
Ikumu Watanabe (author) (Search by this author)National Institute for Materials Science
- Keyword
- Negative Poisson’s ratio, Metamaterial, Generative adversarial network, Additive manufacturing, Voronoi tessellation
- Date published
- 2021-10-18
- Updated at
- 2024-01-05 22:12:12 +0900
On the Enhanced Creep Performance in Ti6246 Achieved Through Laser Powder Bed Fusion (LPBF) Processing
- Journal article
- Creator
-
;Prince Valentine Cobbinah (author) (Search by this author);Sae Matsunaga (author) (Search by this author)Yoshiaki Toda (author) (Search by this author)
;
;Ryosuke Ozasa (author) (Search by this author);Takuya Ishimoto (author) (Search by this author);Takayoshi Nakano (author) (Search by this author);Tsutomu Ito (author) (Search by this author)Yoko Yamabe-Mitarai (author) (Search by this author)
- Keyword
- Additive manufacturing, Crystallographic analysis, Heat-resistant titanium alloys, Microstructure, Precipitation, Volumetric energy density
- Date published
- 2025-04-10
- Updated at
- 2025-06-04 17:16:18 +0900
Anomalous grain growth as a pathway toward fully single-crystallization in IN738LC Ni-based superalloy fabricated by laser powder bed fusion
- Journal article
- Creator
-
;Masayuki Okugawa (author) (Search by this author);Kazufumi Nose (author) (Search by this author);Sei Hirooka (author) (Search by this author)Sukeharu Nomoto (author) (Search by this author)National Institute for Materials Science
;
;Yuheng Liu (author) (Search by this author)Makoto Watanabe (author) (Search by this author)National Institute for Materials Science
;
;Yuichiro Koizumi (author) (Search by this author)Takayoshi Nakano (author) (Search by this author)
- Keyword
- Additive manufacturing, Laser powder bed fusion, Ni-based superalloy, Single-crystal fabrication, μ-Helix scan
- Date published
- 2026-05-14
- Updated at
- 2026-07-14 10:31:33 +0900
Creep data of Hastelloy X fabricated by laser powder bed fusion
- Journal article
- Creator
-
Kota Sawada (author) (Search by this author)
;
Tomotaka Hatakeyama (author) (Search by this author)
;
Masahiro Kusano (author) (Search by this author)
;
Makoto Watanabe (author) (Search by this author)
- Keyword
- Hastelloy X, Additive manufacturing, creep strength, creep deformation behavior, precipitates
- Date published
- 2025-12-31
- Updated at
- 2025-11-21 16:30:04 +0900
Acoustic emission monitoring reveals keyhole formation and evolution
- Journal article
- Creator
-
;Louis Galiègue (author) (Search by this author)Fabien Briffod (author) (Search by this author)
;
Kaita Ito (author) (Search by this author)
;
;Hiroshige Masuo (author) (Search by this author)Makoto Watanabe (author) (Search by this author)
;
;Takayuki Shiraiwa (author) (Search by this author)Manabu Enoki (author) (Search by this author)
- Keyword
- Acoustic emission, Additive manufacturing, Keyhole
- Date published
- 2025-12-05
- Updated at
- 2025-12-10 08:30:07 +0900
Cellular automata simulations of texture evolution in flat-top laser additively manufactured Hastelloy-X
- Journal article
- Creator
-
Fabien Briffod (author) (Search by this author)
;
;Phuangphaga Daram (author) (Search by this author);Tomonori Kitashima (author) (Search by this author)Makoto Watanabe (author) (Search by this author)
- Keyword
- Cellular automata, Additive manufacturing, Texture, Microstructure
- Date published
- 2026-06-30
- Updated at
- 2026-07-03 12:48:41 +0900
An integrated computational materials engineering framework for process-structure-property mapping in laser powder bed fusion
- Journal article
- Creator
-
Fabien Briffod (author) (Search by this author)
;
Phuangphaga Daram (author) (Search by this author)
;
Masahiro Kusano (author) (Search by this author)
;
Makoto Watanabe (author) (Search by this author)
- Keyword
- Additive manufacturing, Crystal plasticity, Microstructure, Cellular automata
- Date published
- 2025-11-14
- Updated at
- 2025-11-17 16:30:03 +0900