10 records found.
Phase composition and magnetic properties of Nd(Pr)2Fe14B and (Sm,Zr)Fe11Ti magnets produced by selective laser melting
- Conference poster
- Collection
- The 28th International Workshop on Rare Earth and Future Permanent Magnets and Their Applications (REPM2025)
- Creator
-
;Sergey Andreev (author) (Search by this author)Ural Federal University, Russia;Viktoria Maltseva (author) (Search by this author)Ural Federal University, Russia;Dmitriy Neznakhin (author) (Search by this author)Ural Federal University, Russia;Arkadiy Shalaginov (author) (Search by this author)Ural Federal University, Russia;Andrey Urzhumtsev (author) (Search by this author)Ural Federal University, RussiaAlexey Volegov (author) (Search by this author)Ural Federal University, Russia
- Keyword
- REPM2025, Additive manufacturing, Selective laser melting, Permanent magnets, Phase composition, Microstructure
- Date published
- Updated at
- 2025-09-11 16:30:51 +0900
An explicit integration approach for predicting the microstructures of multicomponent alloys
- Journal article
- Creator
-
Takumi Morino (author) (Search by this author)
https://orcid.org/0009-0005-0134-7713
(unauthenticated)
;
Machiko Ode (author) (Search by this author)
;
Shoichi Hirosawa (author) (Search by this author)
https://orcid.org/0000-0002-6572-2552
(unauthenticated)
- Keyword
- Phase-field model, Multi-composnet alloy, CALPHAD, Microstructure
- Date published
- 2025-07-15
- Updated at
- 2026-01-22 15:26:05 +0900
Thermodynamically consistent multi-phase-field model incorporating passive external domains
- Journal article
- Creator
-
Akimitsu Ishii (author) (Search by this author)
;
;Yusuke Matsuoka (author) (Search by this author)Toshiyuki Koyama (author) (Search by this author)
https://orcid.org/0000-0001-7424-4858
(unauthenticated)
- Keyword
- Phase-field modeling, Microstructure, Multicomponent, CALPHAD
- Date published
- 2026-03-31
- Updated at
- 2026-04-03 09:38:10 +0900
Mechanical behaviours of hot-pressed rare-earth oxide (RE = Y and La)-doped TaB2-SiC composites
- Journal article
- Creator
-
Shuqi Guo (author) (Search by this author)National Institute for Materials Science
;
Gaku Okuma (author) (Search by this author)National Institute for Materials Science
;
Kimiyoshi Naito (author) (Search by this author)National Institute for Materials Science
;
Hideki Kakisawa (author) (Search by this author)National Institute for Materials Science
- Keyword
- TaB2, SiC, Rare-earth oxide, Microstructure, Mechanical properties
- Date published
- 2023-10-29
- Updated at
- 2024-09-12 11:08:33 +0900
Microstructure evolution and phase analysis of Sm60Ni40 alloy
- Journal article
- Creator
-
;G. Vijayaragavan (author) (Search by this author);D. Prabhu (author) (Search by this author);M.B. Ponnuchamy (author) (Search by this author);K.R.S. Preethi Meher (author) (Search by this author);Ravi Gautam (author) (Search by this author)Mainak Saha (author) (Search by this author)Metallurgical and Materials Engineering, Indian Institute of Technology Madras
;
;R. Gopalan (author) (Search by this author)K.G. Pradeep (author) (Search by this author)
- Keyword
- Sm-Ni alloy, Annealing, Microstructure, Magnetic property, Crystal structure
- Date published
- 2022-12-26
- Updated at
- 2024-10-29 16:44:05 +0900
Strength-limiting defects evolved from heterogeneities during the sintering of high-purity submicron alumina powder
- Journal article
- Creator
-
Gaku Okuma (author) (Search by this author)Research Center for Structural Materials/Materials Manufacturing Field/Ceramic Matrix Composites Group, National Institute for Materials Science
;
;Tsukasa Shimizugawa (author) (Search by this author)Yokohama National University;Shingo Ozaki (author) (Search by this author)Yokohama National UniversityToshio Osada (author) (Search by this author)Research Center for Structural Materials/Materials Manufacturing Field/High-Reliability Heat-Resistant Materials Group, National Institute for Materials Science
;
;Shingo Machida (author) (Search by this author)JFCC;Yutaro Arai (author) (Search by this author)Tokyo university of science;Ryo Inoue (author) (Search by this author)Tokyo university of scienceHideki Kakisawa (author) (Search by this author)Research Center for Structural Materials/Materials Manufacturing Field/Ceramic Matrix Composites Group, National Institute for Materials Science
;
;Yuki Sada (author) (Search by this author)Japan Synchrotron Radiation Research Institute (JASRI);Masayuki Uesugi (author) (Search by this author)Japan Synchrotron Radiation Research Institute (JASRI);Akihisa Takeuchi (author) (Search by this author)Japan Synchrotron Radiation Research Institute (JASRI)Fumihiro Wakai (author) (Search by this author)Research Center for Structural Materials/Materials Manufacturing Field/Ceramic Matrix Composites Group, National Institute for Materials Science
- Keyword
- Sintering, Synchrotron X-ray tomography, Microstructure, Defects, Fracture
- Date published
- 2025-07-16
- Updated at
- 2025-07-23 12:30:20 +0900
High coercivity permanent magnets without reliance on scarce elements
- Journal article
- Creator
-
Sepehri-Amin H. (author) (Search by this author)
;
Bolyachkin A. (author) (Search by this author)National Institute for Materials Science
;
Tang Xin (author) (Search by this author)National Institute for Materials Science
- Keyword
- Permanent Magnets, Coercivity, Microstructure
- Date published
- Updated at
- 2025-08-01 08:30:41 +0900
Fabrication of transparent Ce3+-doped (Gd,Lu)3Al5O12 ceramics by two-step spark plasma sintering
- Journal article
- Creator
-
Ji-Hwoan Lee (author) (Search by this author)National Institute for Materials Science
;
Byung-Nam Kim (author) (Search by this author)National Institute for Materials Science
;
Ji-Guang Li (author) (Search by this author)National Institute for Materials Science
;
Byung-Koog Jang (author) (Search by this author)
- Keyword
- Two step plasma sintering, Optical property, Photoluminescence characteristics, Microstructure, Gadolinium and lutetium aluminum garnet
- Date published
- 2022-10-04
- Updated at
- 2024-10-04 08:30:41 +0900
Numerical Analysis to Evaluate the Effect of Cooling Rates on Microstructures in Casted Cu-Ni-Si Alloys by Phase-Field Simulation
- Journal article
- Creator
-
;Yuki Muto (author) (Search by this author)JX Nippon Mining & Metals;Kazuki Kammuri (author) (Search by this author)JX Nippon Mining & Metals;Junji Miyake (author) (Search by this author)JX Nippon Mining & MetalsMachiko Ode (author) (Search by this author)Research Center for Structural Materials/Materials Evaluation Field/Structural Thermodynamics Group, National Institute for Materials Science
;
;Tetsusei Kurashiki (author) (Search by this author)Graduate School of Engineering, Osaka UniversityHiroaki Mori (author) (Search by this author)Graduate School of Engineering, Osaka University
- Keyword
- Phase-field model, Microstructure, Colson alloy
- Date published
- 2024-12-01
- Updated at
- 2025-01-25 08:30:38 +0900
On the Enhanced Creep Performance in Ti6246 Achieved Through Laser Powder Bed Fusion (LPBF) Processing
- Journal article
- Creator
-
;Prince Valentine Cobbinah (author) (Search by this author);Sae Matsunaga (author) (Search by this author)Yoshiaki Toda (author) (Search by this author)
;
;Ryosuke Ozasa (author) (Search by this author);Takuya Ishimoto (author) (Search by this author);Takayoshi Nakano (author) (Search by this author);Tsutomu Ito (author) (Search by this author)Yoko Yamabe-Mitarai (author) (Search by this author)
- Keyword
- Additive manufacturing, Crystallographic analysis, Heat-resistant titanium alloys, Microstructure, Precipitation, Volumetric energy density
- Date published
- 2025-04-10
- Updated at
- 2025-06-04 17:16:18 +0900