- In Copyright (136)
- Creative Commons BY-NC-ND Attribution-NonCommercial-NoDerivs 4.0 International (42)
- Creative Commons BY Attribution 4.0 International (29)
- Creative Commons BY-NC Attribution-NonCommercial 4.0 International (4)
- Creative Commons BY-SA Attribution-ShareAlike 4.0 International (1)
- http://creativecommons.org/publicdomain/zero/1.0/legalcode (1)
213 records found. Displaying records 1 to 10.
Diamond MEMS Magnetic Force Sensor Toward Femtonewton at Room Temperature
- Conference paper
- Creator
-
;Zilong Zhang (author) (Search by this author);Zhijian Zhao (author) (Search by this author)Meiyong Liao (author) (Search by this author)
;
;Takahito Ono (author) (Search by this author)Masaya Toda (author) (Search by this author) - Keyword
- Diamond, MEMS, magnetic sensors
- Date published
- 2025-01-19
- Updated at
- 2025-11-13 16:30:04 +0900
Creation of Materials by Super-Thermal Field in Additive Manufacturing: From Digital-Twin Science to the Future of Non-Equilibrium Materials Design
- Conference presentation
- Creator
-
;Yuichiro Koizumi (author) (Search by this author)Graduate School of Engineering, Osaka University;Masayuki Okugawa (author) (Search by this author)Graduate School of Engineering, Osaka University;Yoshitaka Adachi (author) (Search by this author)Graduate School of Engineering, Nagoya University;Kohei Morishita (author) (Search by this author)Kyushu University;Kazuhisa Sato (author) (Search by this author)Kyushu UniversityYoshiaki toda (author) (Search by this author)Center for Basic Research on Materials/Data-driven Materials Research Field/Materials Modeling Group, National Institute for Materials Science
;
;Takuya Ishimoto (author) (Search by this author)University of Toyama;Teiichi Kimura (author) (Search by this author)Japan Fine Ceramics CenterTakayoshi Nakano (author) (Search by this author)Graduate School of Engineering, Osaka University
- Keyword
- Powder bed fusion, Modeling, Super thermal field, Additive manufacturing, Digital twin, Rapid solidification, Phase transformation
- Date published
- Updated at
- 2026-05-13 11:33:08 +0900
Mechanical and Dielectric Properties of Si3N4-Based Ceramics
- Journal article
- Creator
-
;M.V. Zamula, (author) (Search by this author)IPMS NASU;V.G. Kolesnichenko (author) (Search by this author)IPMS NASU;A.V. Stepanenko (author) (Search by this author)IPMS NASU;N.I. Tyschenko (author) (Search by this author)IPMS NASU;O.V. Shyrokov (author) (Search by this author)IPMS NASU;V.V. Khardikov (author) (Search by this author)V.N. Karazin Kharkiv National University;D.M. Demirskyi (author) (Search by this author)IPMS NASUO.O. Vasylkiv (author) (Search by this author)Research Center for Electronic and Optical Materials/Optical Materials Field/Polycrystalline Optical Material Group, National Institute for Materials Science
;
;H.Y. Borodianska (author) (Search by this author)IPMS NASUA.V. Ragulya (author) (Search by this author)IPMS NASU
- Keyword
- Silicon nitride, mechanical properties, hardness, fracture toughness, Dielectric properties, SPS
- Date published
- 2025-04-01
- Updated at
- 2025-05-02 10:26:05 +0900
Machine learning approach for the prediction of electron inelastic mean free paths
- Journal article
- Creator
-
;Xun Liu (author) (Search by this author)National Institute for Materials Science;Lihao Yang (author) (Search by this author);Zhufeng Hou (author) (Search by this author)Bo Da (author) (Search by this author)National Institute for Materials Science
;
Kenji Nagata (author) (Search by this author)National Institute for Materials Science
;
Hideki Yoshikawa (author) (Search by this author)National Institute for Materials Science
;
Shigeo Tanuma (author) (Search by this author)National Institute for Materials Science
;
;Yang Sun (author) (Search by this author)Zejun Ding (author) (Search by this author)
- Keyword
- machine learning, inelastic mean free path
- Date published
- 2021-03-24
- Updated at
- 2024-01-05 22:13:49 +0900
Novel numerical approach for reliability-assurance of ceramics by combining self-crack-healing with proof testing
- Journal article
- Creator
-
;Taiyo Maeda (author) (Search by this author)Toshio Osada (author) (Search by this author)National Institute for Materials Science
;
Shingo Ozaki (author) (Search by this author)
- Keyword
- Finite element analysis, Self-healing ceramics, Proof test, Oxidation kinetics, Fracture mechanics, Weibull distribution
- Date published
- 2023-11-03
- Updated at
- 2025-11-04 08:30:21 +0900
Inverse exchange bias effects and magnetoelectric coupling of the half-doped perovskite-type chromites Gd0.5Sr0.5CrO3 and Gd0.5Ca0.5CrO3
- Journal article
- Creator
-
;Biswajit Dalal (author) (Search by this author)National Institute for Materials ScienceXun Kang (author) (Search by this author)National Institute for Materials Science
;
Yoshitaka Matsushita (author) (Search by this author)National Institute for Materials Science
;
Alexei A. Belik (author) (Search by this author)National Institute for Materials Science
;
Yoshihiro Tsujimoto (author) (Search by this author)National Institute for Materials Science
;
Kazunari Yamaura (author) (Search by this author)National Institute for Materials Science
- Keyword
- perovskite oxide, chromium, exchange bias effect
- Date published
- 2022-09-21
- Updated at
- 2024-09-10 12:30:18 +0900
Impact of nitrogen on the charge-to-spin conversion efficiency in antiferromagnetic compared to thin films
- Journal article
- Creator
-
;Nitipriya Tripathi (author) (Search by this author);Shrawan K. Mishra (author) (Search by this author)Yoshio Miura (author) (Search by this author)National Institute for Materials Science
;
Shinji Isogami (author) (Search by this author)National Institute for Materials Science
- Keyword
- Nitride, Charge-spin conversion, Antiferromagnet
- Date published
- 2024-06-04
- Updated at
- 2024-09-02 12:30:22 +0900
Process optimization on kesterite-based ceramics for enhancing their thermoelectric performances assisted by active machine learning approach: A tool for metal-sulfide ceramics development
- Journal article
- Creator
-
Cédric Bourgès (author) (Search by this author)National Institute for Materials Science
;
Guillaume Lambard (author) (Search by this author)National Institute for Materials Science
;
Naoki Sato (author) (Search by this author)National Institute for Materials Science
;
Makoto Tachibana (author) (Search by this author)National Institute for Materials Science
;
Satoshi Ishii (author) (Search by this author)National Institute for Materials Science
;
Takao Mori (author) (Search by this author)National Institute for Materials Science
- Keyword
- Kesterite, Machine learning, Process, Thermoelectric, Ceramic
- Date published
- 2024-08-29
- Updated at
- 2024-09-20 16:30:30 +0900
ALMLBO PIPELINE APPROACH APPLY TO MATERIAL PROCESS AND COMPOSITION OPTIMIZATION FOR ENERGY-SAVING APPLICATIONS
- Conference presentation
- Creator
-
Cédric Bourgès (author) (Search by this author)International Center for Young Scientists, National Institute for Materials Science
;
Guillaume Lambard (author) (Search by this author)Center for Basic Research on Materials/Data-driven Materials Research Field/Data-driven Materials Design Group, National Institute for Materials Science
;
Naoki Sato (author) (Search by this author)Research Center for Materials Nanoarchitectonics (MANA)/Nanomaterials Field/Thermal Energy Materials Group, National Institute for Materials Science
;
Makoto Tachibana (author) (Search by this author)Research Center for Materials Nanoarchitectonics (MANA)/Nanomaterials Field/Thermal Energy Materials Group, National Institute for Materials Science
;
Satoshi Ishii (author) (Search by this author)Research Center for Materials Nanoarchitectonics (MANA)/Nanomaterials Field/Optical Nanostructure Team, National Institute for Materials Science
;
Takao Mori (author) (Search by this author)Research Center for Materials Nanoarchitectonics (MANA)/Nanomaterials Field/Thermal Energy Materials Group, National Institute for Materials Science
- Keyword
- Kesterite, Machine learning, Process, Thermoelectric, Ceramic
- Date published
- Updated at
- 2024-10-30 16:30:23 +0900
Partially-oriented MgB2 superconducting bulks with addition of B4C and cubic BN obtained by slip casting under high magnetic field and spark plasma sintering
- Journal article
- Creator
-
;M.A. Grigoroscuta (author) (Search by this author);G. Aldica (author) (Search by this author);I. Pasuk (author) (Search by this author);M. Burdusel (author) (Search by this author);V. Sandu (author) (Search by this author);A. Kuncser (author) (Search by this author)T.S. Suzuki (author) (Search by this author)National Institute for Materials Science
;
O. Vasylkiv (author) (Search by this author)National Institute for Materials Science
;
P. Badica (author) (Search by this author)
- Keyword
- MgB2, B4C and c-BN additions, c-axis texture, Critical current density, Pinning force
- Date published
- 2020-10-12
- Updated at
- 2024-11-19 16:30:31 +0900