Journal article Orientation-controlled epitaxy of CoSn anisotropic conductive thin films on sapphire substrates toward interconnect applications
ORCID SAMURAI ;
Rohit Dahule (author) (Search by this author)
ORCID ; ORCID SAMURAI ;
Mevhibe Dilara Pütkül (author) (Search by this author)
ORCID ;
Yusuke Ikeda (author) (Search by this author)
ORCID ; ORCID SAMURAI ; ORCID SAMURAI
Collection

Citation
Tomoya Nakatani, Rohit Dahule, Nattamon Suwannaharn, Mevhibe Dilara Pütkül, Yusuke Ikeda, Taisuke T. Sasaki, Ryoji Sahara. Orientation-controlled epitaxy of CoSn anisotropic conductive thin films on sapphire substrates toward interconnect applications. Journal of Applied Physics. 2026, 140 (15), 155101. https://doi.org/10.1063/5.0352862

Description:

(abstract)

The increasing resistivity of Cu interconnects at reduced device dimensions requires alternative conductors with suppressed size effects of resistivity. Materials with highly anisotropic electronic transport are a promising solution. CoSn exhibits pseudo-one-dimensional transport along the c axis with low resistivity comparable to conventional metals, making it a promising candidate for next-generation interconnects. In this study, we investigate the epitaxial growth of CoSn thin films on sapphire substrates with controlled crystallographic orientations to align the low-resistivity c axis in the plane. We successfully grow single-crystalline CoSn(101 ̅0) and CoSn(112 ̅0) films on sapphire substrates using appropriate buffer layers. Although the (112 ̅0) plane has a higher atomic packing density and is thus expected to yield lower surface energy and smoother films based on an analogy with conventional metals, the two orientations show markedly different surface morphologies: CoSn(101 ̅0) forms comparatively smooth films, whereas CoSn(112 ̅0) exhibits pronounced {101 ̅0}-faceting and rough surfaces. First-principles calculations reveal that the (101 ̅0) surface has lower surface energy than the (112 ̅0) surface, consistent with the experimentally observed facet formation. This demonstrates that surface energetics in CoSn are governed not by atomic packing density but by anisotropic bonding associated with the kagome lattice. Electrical transport measurements reveal strong anisotropy on crystallographic orientation, consistent with the bulk properties, with the lowest resistivity achieved along the c axis, down to 10.6 μΩ cm for 50-nm-thick CoSn(101 ̅0). This work establishes orientation-controlled epitaxy on 300-mm-wafer-compatible sapphire substrates as a viable strategy for integrating CoSn into next-generation interconnect architectures.

Rights:

  • In Copyright

    This article may be downloaded for personal use only. Any other use requires prior permission of the author and AIP Publishing. This article appeared in Tomoya Nakatani, Rohit Dahule, Nattamon Suwannaharn, Mevhibe Dilara Pütkül, Yusuke Ikeda, Taisuke T. Sasaki, Ryoji Sahara; Orientation-controlled epitaxy of CoSn anisotropic conductive thin films on sapphire substrates toward interconnect applications. J. Appl. Phys. 21 October 2026; 140 (15): 155101 and may be found at https://doi.org/10.1063/5.0352862.

Keyword: interconnect, epitaxy, kagome metal, sputtering, CoSn, sapphire

Date published: 2026-10-21

Publisher: AIP Publishing

Journal:

  • Journal of Applied Physics (ISSN: 00218979) vol. 140 issue. 15 155101

Funding:

  • Ministry of Education, Culture, Sports, Science and Technology JPMXP1225NM5220
  • Ministry of Education, Culture, Sports, Science and Technology JPMXP1226NM5145
  • Japan Science and Technology Agency JPMJES2531

Manuscript type: Author's version (Accepted manuscript)

MDR DOI: https://doi.org/10.48505/nims.8740

First published URL: https://doi.org/10.1063/5.0352862

Related item:

Other identifier(s):

Contact agent:

Updated at: 2026-11-17 15:49:23 +0900

Published on MDR: 2026-11-17 18:29:15 +0900

Filename Size
Filename CoSn_sapphire_MDR.pdf
application/pdf
Size 1.94 MB Detail
Filename Supplementary.pdf (Thumbnail)
application/pdf
Size 590 KB Detail