ジャーナル論文 Orientation-controlled epitaxy of CoSn anisotropic conductive thin films on sapphire substrates toward interconnect applications
ORCID SAMURAI ;
Rohit Dahule (author) (この著者で検索)
ORCID ; ORCID SAMURAI ;
Mevhibe Dilara Pütkül (author) (この著者で検索)
ORCID ;
Yusuke Ikeda (author) (この著者で検索)
ORCID ; ORCID SAMURAI ; ORCID SAMURAI
コレクション

引用
Tomoya Nakatani, Rohit Dahule, Nattamon Suwannaharn, Mevhibe Dilara Pütkül, Yusuke Ikeda, Taisuke T. Sasaki, Ryoji Sahara. Orientation-controlled epitaxy of CoSn anisotropic conductive thin films on sapphire substrates toward interconnect applications. Journal of Applied Physics. 2026, 140 (15), 155101. https://doi.org/10.1063/5.0352862

説明:

(abstract)

The increasing resistivity of Cu interconnects at reduced device dimensions requires alternative conductors with suppressed size effects of resistivity. Materials with highly anisotropic electronic transport are a promising solution. CoSn exhibits pseudo-one-dimensional transport along the c axis with low resistivity comparable to conventional metals, making it a promising candidate for next-generation interconnects. In this study, we investigate the epitaxial growth of CoSn thin films on sapphire substrates with controlled crystallographic orientations to align the low-resistivity c axis in the plane. We successfully grow single-crystalline CoSn(101 ̅0) and CoSn(112 ̅0) films on sapphire substrates using appropriate buffer layers. Although the (112 ̅0) plane has a higher atomic packing density and is thus expected to yield lower surface energy and smoother films based on an analogy with conventional metals, the two orientations show markedly different surface morphologies: CoSn(101 ̅0) forms comparatively smooth films, whereas CoSn(112 ̅0) exhibits pronounced {101 ̅0}-faceting and rough surfaces. First-principles calculations reveal that the (101 ̅0) surface has lower surface energy than the (112 ̅0) surface, consistent with the experimentally observed facet formation. This demonstrates that surface energetics in CoSn are governed not by atomic packing density but by anisotropic bonding associated with the kagome lattice. Electrical transport measurements reveal strong anisotropy on crystallographic orientation, consistent with the bulk properties, with the lowest resistivity achieved along the c axis, down to 10.6 μΩ cm for 50-nm-thick CoSn(101 ̅0). This work establishes orientation-controlled epitaxy on 300-mm-wafer-compatible sapphire substrates as a viable strategy for integrating CoSn into next-generation interconnect architectures.

権利情報:

  • In Copyright

    This article may be downloaded for personal use only. Any other use requires prior permission of the author and AIP Publishing. This article appeared in Tomoya Nakatani, Rohit Dahule, Nattamon Suwannaharn, Mevhibe Dilara Pütkül, Yusuke Ikeda, Taisuke T. Sasaki, Ryoji Sahara; Orientation-controlled epitaxy of CoSn anisotropic conductive thin films on sapphire substrates toward interconnect applications. J. Appl. Phys. 21 October 2026; 140 (15): 155101 and may be found at https://doi.org/10.1063/5.0352862.

キーワード: interconnect, epitaxy, kagome metal, sputtering, CoSn, sapphire

刊行年月日: 2026-10-21

出版者: AIP Publishing

掲載誌:

  • Journal of Applied Physics (ISSN: 00218979) vol. 140 issue. 15 155101

研究助成金:

  • Ministry of Education, Culture, Sports, Science and Technology JPMXP1225NM5220
  • Ministry of Education, Culture, Sports, Science and Technology JPMXP1226NM5145
  • Japan Science and Technology Agency JPMJES2531

原稿種別: 著者最終稿 (Accepted manuscript)

MDR DOI: https://doi.org/10.48505/nims.8740

公開URL: https://doi.org/10.1063/5.0352862

関連資料:

その他の識別子:

連絡先:

更新時刻: 2026-11-17 15:49:23 +0900

MDRでの公開時刻: 2026-11-17 18:29:15 +0900

ファイル名 サイズ
ファイル名 CoSn_sapphire_MDR.pdf
application/pdf
サイズ 1.94MB 詳細
ファイル名 Supplementary.pdf (サムネイル)
application/pdf
サイズ 590KB 詳細