Article Alleviating Defect and Oxidation in Tin Perovskite Solar Cells Using a Bidentate Ligand

Dhruba B. Khadka SAMURAI ORCID (National Institute for Materials Science) ; Yasuhiro Shirai SAMURAI ORCID (National Institute for Materials Science) ; Masatoshi Yanagida SAMURAI ORCID (National Institute for Materials Science) ; Terumasa Tadano SAMURAI ORCID (National Institute for Materials Science) ; Kenjiro Miyano SAMURAI ORCID (National Institute for Materials Science)

Collection

Citation
Dhruba B. Khadka, Yasuhiro Shirai, Masatoshi Yanagida, Terumasa Tadano, Kenjiro Miyano. Alleviating Defect and Oxidation in Tin Perovskite Solar Cells Using a Bidentate Ligand. Chemistry of Materials. 2023, 35 (11), 4250-4258. https://doi.org/10.1021/acs.chemmater.3c00243
SAMURAI

Description:

(abstract)

Tin-perovskite solar cells (Sn-PSCs) have low energy conversion efficiency and stability due to facile oxidation of Sn2+ during precursor solution preparation and film growth. Herein, we introduced formohydrazide (FHZ) as a bidentate ligand into the Sn-halide perovskite (Sn-HaP) to improve the optoelectronic properties. This approach is found to be effective for the suppression of Sn-oxidation and interfacial energy band modulation. The depth profile distribution confirmed that the FHZ additive is primarily located on surfaces and the hole transport layer (HTL)/Sn-HaP interface with partly capping at the grain boundaries, which offers a reducing ambient in the Sn-HaP film. Therefore, the device with FHZ demonstrated a device efficiency of 12.87% (9.93% control) with enhanced open circuit voltage from ∼0.734 to 0.874 V and improved operational device stability. The device analysis suggests that the FHZ additive alleviates the bulk and interface defect in the Sn-PSC with −NH2 and −O═C bidentate bonding to Sn-HaP, which is supported by theoretical calculations. Thus, this work corroborates the importance of multidentate ligands for modulating the film morphology and defect chemistry in the Sn-perovskite for high efficiency and superior device stability.

Rights:

  • In Copyright

    This document is the unedited Author’s version of a Submitted Work that was subsequently accepted for publication in Chemistry of Materials, copyright © 2023 American Chemical Society after peer review. To access the final edited and published work see https://doi.org/10.1021/acs.chemmater.3c00243.

Keyword: Tin Perovskite, Sn oxidation, Additive Engineering, Bidentate Molecule

Date published: 2023-06-13

Publisher: American Chemical Society (ACS)

Journal:

  • Chemistry of Materials (ISSN: 15205002) vol. 35 issue. 11 p. 4250-4258

Funding:

  • Japan Science and Technology Agency JPMJMI21E6

Manuscript type: Author's version (Submitted manuscript)

MDR DOI: https://doi.org/10.48505/nims.5055

First published URL: https://doi.org/10.1021/acs.chemmater.3c00243

Related item:

Other identifier(s):

Contact agent:

Updated at: 2024-11-29 16:31:38 +0900

Published on MDR: 2024-11-29 16:31:38 +0900

Filename Size
Filename 2_Main-CM-Sn-PSCs.pdf (Thumbnail)
application/pdf
Size 1.33 MB Detail