Download file (4.28MB)
Download as zip (4.26MB)

コレクション

引用

説明:

This article presents an investigation of grain boundary serration and its effects on high temperature creep behavior of Udimet-720Li. Grain boundary serration is achieved by controlling the cooling conditions during heat treatments through continuous and discontinuous precipitation of γ′. Continuous precipitation of coarse γ′ particles could pin grain boundaries and lead to a small degree of undulation (Type-I boundary), while discontinuous reaction forming cellular γ/γ′ behind the mobile grain boundary could cause larger undulation (Type-II boundary). Samples with straight (STB), Type-I (SRB-1), Type-II (SRB-2) grain boundaries were produced. Creep tests under 700 °C / 700 MPa have been conducted to investigate its effect on creep behaviors. It was observed that the SRB-1 sample exhibited a notably lower minimum creep rate and longer rupture lifetime than that of the STB sample. These improvements are primarily attributed to the different size distribution of γ′ precipitates, which contributes to a higher hindrance to dislocation movements. Conversely, the SRB-2 sample exhibited a higher minimum creep rate, and a considerable 42% reduction in rupture lifetime in contrast to the STB sample. This is mainly due to the enhanced grain boundary fractions due to the formation of Type-II serration in the SRB-2 sample, promoting grain boundary diffusion creep.

権利情報:

• In Copyright
  

キーワード: Superalloys, Heat treatment, Serrated grain boundary, Creep properties

刊行年月日: 2024-08-21

出版者: Springer Nature Switzerland

掲載誌:

• Minerals, Metals and Materials Series (ISSN: 23671181) vol. 1 p. 297-305

研究助成金:

• National Science and Technology Council (NSTC) in Taiwan NSTC 112-2927-I-007-504
• National Science and Technology Council (NSTC) in Taiwan NSTC 110-2221-E-007-020- MY3
• NSTC 112-2224-E-007-003 (National Science and Technology Council (NSTC) in Taiwan)
• Ministry of Education (MOE) in Taiwan (The Featured Areas Research Center Program within the framework of the Higher Education Sprout Project)

原稿種別: 著者最終稿 (Accepted manuscript)

MDR DOI: https://doi.org/10.48505/nims.4851

公開URL: https://doi.org/10.1007/978-3-031-63937-1_28

関連資料:

その他の識別子:

連絡先:

更新時刻: 2025-08-21 08:30:42 +0900

MDRでの公開時刻: 2025-08-21 08:19:15 +0900