Download file (8.02MB)
Download as zip (7.12MB)

コレクション

引用

説明:

Phase-field simulations are performed to investigate the martensitic transformation (MT) from body-centeredcubic-α to face-centered-cubic-γ′ when external compressive stress is applied along the [100]α direction, as well as the reverse MT from γ′ to α during the unloading of the external stress. The objective is to gain fundamental insights into the reversibility of the MT in Fe–Mn–Al–Ni alloy with a microstructure containing nanoscale β-NiAl precipitates in the α phase. The stress-induced MT from α to γ′ occurred under a compressive loading of approximately 400 MPa, resulting in a martensite microstructure composed of two of the three crystallographic orientation variants. The elastic energy in the β phase increased owing to the MT, which slightly increased the structural density of martensite and consequently increased the chemical free energy of the β phase. Moreover, the structural density of martensite in the γ′ phase decreased near the β-phase boundary, where a compositional gradient was present, resulting in an increase in the chemical free energy of the γ′ phase. A complete reverse MT occurred when the total free-energy change, determined by the balance between the elastic-energy change and chemical free-energy change, temporarily became positive during the unloading of external stress.

権利情報:

• Creative Commons BY-NC-ND Attribution-NonCommercial-NoDerivs 4.0 International
  

キーワード: Phase-field model, Martensitic transformation, Superelasticity, Nanoprecipitate, Free-energy change

刊行年月日: 2026-06-14

出版者: Elsevier BV

掲載誌:

• Materials & Design (ISSN: 02641275) vol. 268 116404

研究助成金:

• Japan Society for the Promotion of Science

原稿種別: 出版者版 (Version of record)

MDR DOI:

公開URL: https://doi.org/10.1016/j.matdes.2026.116404

関連資料:

その他の識別子:

連絡先:

更新時刻: 2026-08-24 14:23:33 +0900

MDRでの公開時刻: 2026-08-24 16:27:43 +0900