Download file (7.13 MB)
Download as zip (6.97 MB)

Collection

Citation

Description:

This short communication reports on the facile and scalable synthesis and characterization of molybdenum carbides/carbon nanocomposites prepared by laser pyrolysis in a one-step process. Water and commercial molybdenum oxide were used as low-cost environmentally friendly precursors. The nanocomposites are mainly composed of two types of carbides with different apparent crystallite sizes, 21 ± 1 nm and 9 ± 1 nm for Mo2C and MoC1-x, respectively. Thanks to a simple annealing at 500 ℃ under argon, it was possible to increase the specific surface area around 50 m2/g without changing the morphology of the nanocomposite.

Rights:

• Creative Commons BY Attribution 4.0 International
  

  Copyright: © 2022 by the authors.
  Licensee MDPI, Basel, Switzerland.
  This article is an open access article
  distributed under the terms and
  conditions of the Creative Commons
  Attribution (CC BY) license (https://
  creativecommons.org/licenses/by/
  4.0/).

Keyword: Molybdenum Carbides, Laser Pyrolysis

Date published: 2022-08-08

Publisher: MDPI AG

Journal:

• Nanomanufacturing (ISSN: 2673687X) vol. 2 issue. 3 p. 112-123

Funding:

• CNRS
• CEA

Manuscript type: Publisher's version (Version of record)

MDR DOI:

First published URL: https://doi.org/10.3390/nanomanufacturing2030009

Related item:

Other identifier(s):

Contact agent:

Updated at: 2024-08-20 16:30:21 +0900

Published on MDR: 2024-08-20 16:30:22 +0900