ジャーナル論文 Conversion of the (001) Strontium Titanate Surface to Titanium Monoxide via Ultrafast High-Temperature Sintering
Keita Ihara (author) (この著者で検索)
;
Toshiki Sato (author) (この著者で検索)
;
Tomoharu Tokunaga (author) (この著者で検索)
;
Shunsuke Kobayashi (author) (この著者で検索)
ORCID ; ORCID SAMURAI ;
Takahisa Yamamoto (author) (この著者で検索)
ORCID
コレクション

引用
Keita Ihara, Toshiki Sato, Tomoharu Tokunaga, Shunsuke Kobayashi, Kiyoshi Kobayashi, Takahisa Yamamoto. Conversion of the (001) Strontium Titanate Surface to Titanium Monoxide via Ultrafast High-Temperature Sintering. Crystal Growth & Design. 2025, 25 (20), 8393-8398. https://doi.org/10.1021/acs.cgd.5c00622

説明:

(abstract)

The reconstruction of crystal surfaces (the alteration of the surface structure from that of the bulk) is imperative for the development of catalysts and energy-related materials. In this study, ultrafast high-temperature sintering (UHS) was employed to rapidly heat and reconstruct a model surface, namely the (001) surface of a SrTiO3 single crystal. The structural changes were investigated by X-ray diffraction, scanning transmission electron microscopy, and electron energy-loss spectroscopy. Following treatment at 1650 °C for 180 s using UHS, a gold-colored transformation was observed on the surface; however, this was not the case after treatment at 1550 °C. Microscopic and spectroscopic analysis have revealed that the gold-colored surface layer possesses a thickness of approximately 100 nm, predominantly comprising rock salt-type cubic TiO. Furthermore, the electrical conductivity exhibited by the surface layer was very close to that reported for cubic TiO. The reconstruction mechanism of the (001) surface during UHS treatment was inferred to be similar to the incongruent sublimation of the SrTiO3 surface that has previously been observed under vacuum at extremely low oxygen partial pressures. In conclusion, UHS has been demonstrated to be a highly efficacious technique for expeditious reconstruction of crystal surfaces, encompassing other metal oxides.

権利情報:

  • In Copyright

    This document is the Accepted Manuscript version of a Published Work that appeared in final form in Crystal Growth & Design, copyright © 2025 American Chemical Society after peer review and technical editing by the publisher. To access the final edited and published work see https://doi.org/10.1021/acs.cgd.5c00622.

キーワード: strontium titanate, surface reconstruction, titanium monoxide, ultrafast high-temperature sintering, electrical conductance

刊行年月日: 2025-10-15

出版者: ACS

掲載誌:

  • Crystal Growth & Design (ISSN: 15287483) vol. 25 issue. 20 p. 8393-8398

研究助成金:

  • Ministry of Education, Culture, Sports, Science and Technology
  • Core Research for Evolutional Science and Technology JPMJCR1996
  • Japan Society for the Promotion of Science 24K01156

原稿種別: 著者最終稿 (Accepted manuscript)

MDR DOI: https://doi.org/10.48505/nims.5966

公開URL: https://doi.org/10.1021/acs.cgd.5c00622

関連資料:

その他の識別子:

連絡先:

更新時刻: 2026-04-30 12:01:11 +0900

MDRでの公開時刻: 2026-09-26 08:26:52 +0900

ファイル名 サイズ
ファイル名 Revised_Manuscript_withFiguers_Ihara_etal.docx (サムネイル)
application/vnd.openxmlformats-officedocument.wordprocessingml.document
サイズ 1.17MB 詳細