Download file (2.12 MB)
Download as zip (2.11 MB)

Collection

Citation

Description:

In general, the stress-strain relationship of materials obtained by standard uniaxial tensile test, which can identify the hardening behavior only up to necking. Beyond necking, the material behavior is usually estimated by extrapolating or numerical modelling based on hardening behavior prior to the uniform elongation. This study investigated the post-necking hardening behavior of a fully martensitic steel by in-situ synchrotron X-ray diffraction during tensile deformation. From the in-situ results, the dislocation density, lattice strain and phase stress were calculated within the necked region and outside the necked region. A near steady-state flow with some hardening was observed within the necked region of a martensitic steel. However, beyond uniform elongation, outside the necked region the dislocation density and phase stress decreased slightly, suggesting stress relaxation. Steady-state flow and dislocation densities at large strains suggest dynamic recovery occurs in the martensitic steel at room temperature.

Rights:

• Creative Commons BY-NC-ND Attribution-NonCommercial-NoDerivs 4.0 International
  

Keyword: Martensitic Steel, in-situ Synchrotron X-ray Diffraction, Necking

Date published: 2024-10-15

Publisher: Iron and Steel Institute of Japan

Journal:

• ISIJ International (ISSN: 09151559) vol. 64 issue. 12 ISIJINT-2024-093

Funding:

Manuscript type: Publisher's version (Version of record)

MDR DOI:

First published URL: https://doi.org/10.2355/isijinternational.isijint-2024-093

Related item:

Other identifier(s):

Contact agent:

Updated at: 2024-11-07 16:30:41 +0900

Published on MDR: 2024-11-07 16:30:41 +0900