Article Suppressing Light-Induced Phase Segregation via Dual Interface Modification for High-Performance and Stable Inverted CsPbIBr2 Perovskite Solar Cells

Siliang Cao ; Yulu He ; Md. Abdul Karim (National Institute for Materials Science) ; Shamim Ahmmed ; Md. Emrul Kayesh (National Institute for Materials Science) ; Yun Jia ; Takeaki Sakurai ; Ashraful Islam SAMURAI ORCID (National Institute for Materials Science)

Collection

Citation
Siliang Cao, Yulu He, Md. Abdul Karim, Shamim Ahmmed, Md. Emrul Kayesh, Yun Jia, Takeaki Sakurai, Ashraful Islam. Suppressing Light-Induced Phase Segregation via Dual Interface Modification for High-Performance and Stable Inverted CsPbIBr2 Perovskite Solar Cells. ACS Applied Materials & Interfaces. 2025, 17 (23), 34794-34807. https://doi.org/10.1021/acsami.5c04349

Description:

(abstract)

Wide-bandgap perovskite materials are gaining enormous attention recently, particularly in multijunction photovoltaics. Despite the encouraging development, light-induced phase segregation still impedes their operational stability, primarily due to the high content of bromide constituents. Here, we report a bilateral interface design to mitigate the phase instability of 2.1 eV bandgap all-inorganic CsPbIBr2 perovskite solar cells (PSCs)─(1) buried interface: strong chemical interactions occur between nickel oxide (NiOx) and self-assembled monolayer (SAM) via phosphonic acid anchoring groups, establishing an interfacial bridge that promotes efficient hole extraction. (2) Top surface: a solution-processed BCP (s-BCP) layer is introduced to passivate the perovskite film and suppress trap-assisted recombination, resulting in reduced phase segregation. The synergistic effect of dual interfaces reduces defect formation, moisture penetration, and phase transition, contributing to enhanced phase stability. Optimal energetic alignment and defect passivation lead to improved photovoltaic (PV) performance. As a result, the dual interface modification delivers a power conversion efficiency (PCE) of 10.2% with a fill factor of 82.3%. Additionally, the modified device retains >87% of its initial efficiency after 110 h of continuous operation and exhibits merely 5% degradation after 300 days of storage, which is one of the most stable performances reported for all-inorganic CsPbIBr2 PSCs. This work reveals a key strategy to address inherent phase instability in wide-bandgap perovskites through interface engineering.

Rights:

  • In Copyright
    This document is the unedited Author’s version of a Submitted Work that was subsequently accepted for publication in ACS Applied Materials & Interfaces, copyright © 2025 American Chemical Society after peer review. To access the final edited and published work see https://doi.org/10.1021/acsami.5c04349.

Keyword: Perovskite Solar Cells, CsPbIBr2, Light-Induced Phase Segregation

Date published: 2025-06-11

Publisher: American Chemical Society (ACS)

Journal:

  • ACS Applied Materials & Interfaces (ISSN: 19448252) vol. 17 issue. 23 p. 34794-34807

Funding:

  • JST-Mirai Program JPMJMI21E6
  • New Energy and Industrial Technology Development Organization 22H02190
  • Chinese Government Scholarship JPMJAN23B2
  • Japan Society for the Promotion of Science 22H02190

Manuscript type: Author's original (Submitted manuscript)

MDR DOI: https://doi.org/10.48505/nims.5950

First published URL: https://doi.org/10.1021/acsami.5c04349

Related item:

Other identifier(s):

Contact agent:

Updated at: 2025-12-03 08:30:10 +0900

Published on MDR: 2025-12-03 08:22:52 +0900

Filename Size
Filename Suppressing Light-Induced Phase Segregation via Dual Interfaces Modification for High-Performance and Stable Inverted CsPbIBr2 Perovskite Solar Cells.docx (Thumbnail)
application/vnd.openxmlformats-officedocument.wordprocessingml.document
Size 14.5 MB Detail