Download file (7.67 MB)
Download as zip (7.43 MB)

Collection

Citation

Description:

Lüders phenomenon is one type of inhomogeneous plastic deformation occurring in the elas-tic-to-plastic transition region, and it is an undesirable plastic deformation behavior. Although conventional measures based on the chemical composition design, plasticity processing principle, or utilization of composited microstructures are used to suppress this phenomenon in engineering, demerits are present, such as high cost and low fracture behavior. The Lüders phenomenon begins with the formation of plastic bands (inhomogeneous yielding) at one or several local sites. If yielding simultaneously occurs everywhere rather than at several local sites, the formation of local plastic bands will be inhibited; as a result, the Lüders deformation will be suppressed. Based on this idea, a new approach was proposed in which the number of local yield sites was increased by heat treatments. A medium-carbon tempered martensite steel (Fe-0.3C-1.5Mn, in wt%) was used to verify the validity of the new approach, and the optimum heat-treatment conditions for the balance of mechanical property and deformation behavior were determined.

Rights:

• Creative Commons BY Attribution 4.0 International
  

Keyword: Lüders deformation, inhomogeneous plastic deformation, medium-carbon steel, tempering, digital image correlation

Date published: 2024-03-04

Publisher: MDPI AG

Journal:

• Metals (ISSN: 20754701) vol. 14 issue. 3 p. 306-

Funding:

• Technical Research Aid of the JFE 21st Century Foundation

Manuscript type: Publisher's version (Version of record)

MDR DOI:

First published URL: https://doi.org/10.3390/met14030306

Related item:

Other identifier(s):

Contact agent:

Updated at: 2024-03-19 16:57:11 +0900

Published on MDR: 2024-03-19 16:57:11 +0900