Download file (204KB)
Download as zip (194KB)

コレクション

引用

説明:

The present decade has witnessed a huge volume of research revolving around a number of
Additive Manufacturing (AM) techniques, especially for the fabrication of different metallic materials. However, fabrication of ceramics and cermets using AM-based techniques mainly suffers from two primary limitations which are: (i) low density and (ii) poor mechanical properties of the final components. Although there has been a considerable volume of work on AM based techniques for manufacturing ceramic and cermet parts with enhanced densities and improved mechanical properties, however, there is limited understanding on the correlation of microstructure of AM-based ceramic and cermet components with the mechanical properties. The present article is aimed to review some of the most commonly used AM techniques for the fabrication of ceramics and cermets. This has been followed by a brief discussion on the microstructural developments during
different AM-based techniques. In addition, an overview of the challenges and future perspectives, mainly associated with the necessity towards developing a systematic structure-property correlation in these materials has been provided based on three factors viz. the efficiency of different AM-based fabrication techniques (involved in ceramic and cermet research), an interdisciplinary research combining ceramic research with microstructural engineering and commercialisation of different AM techniques based on the authors’ viewpoints.

権利情報:

• In Copyright
  

キーワード: Selective Laser Sintering (SLS®), additive manufacturing (AM), Cermets, selective laser melting (SLM), stereolithography, correlative characterisation

刊行年月日: 2021-08-10

出版者: Springer

掲載誌:

• Sadhana (ISSN: 02562499) vol. 46 162

研究助成金:

原稿種別: 査読前原稿 (Author's original)

MDR DOI: https://doi.org/10.48505/nims.4631

公開URL: https://doi.org/10.1007/s12046-021-01685-2

関連資料:

その他の識別子:

連絡先:

更新時刻: 2024-10-08 11:48:19 +0900

MDRでの公開時刻: 2024-08-06 12:30:32 +0900