論文 Optimizing natural rubber blends for examination gloves: Vacuum radiation for mechanical strength and solvent barrier

Nurul Hakimah Lazim ; Siti Aisyah Shamsudin ; Norsyahidah Mohd Hidzir ; Chai Chee Keong ; Izumi Ichinose SAMURAI ORCID (National Institute for Materials Science)

コレクション

引用
Nurul Hakimah Lazim, Siti Aisyah Shamsudin, Norsyahidah Mohd Hidzir, Chai Chee Keong, Izumi Ichinose. Optimizing natural rubber blends for examination gloves: Vacuum radiation for mechanical strength and solvent barrier. Journal of Applied Polymer Science. 2024, 141 (1), e54741. https://doi.org/10.1002/app.54741
SAMURAI

説明:

(abstract)

Natural rubber (NR) is emblematic of sustainability compared to synthetic rubber. However, the tradition of adding sulfur as a vulcanization ingredient results in the release of toxic substances and the potential for health issues. In this study, a feasible strategy was proposed to replace sulfur and discover a safe bulk modification process for NR films. The results have shown that the NR particle size was disintegrated to below 10 nm by gamma irradiation. High tension strength up to 24.45 MPa was observed in the vulcanized NR blend film, which could be elongated up to 800% strain after exposure to an optimum dose of 14 kGy. In comparison to commercial NR latex and nitrile gloves, the vulcanized NR/ SIS films exhibited better chemical resistance ability against hexane, methanol, toluene, and acetone, as revealed by the permeation test. The appearance of amorphous regions and highly oriented NR crystallites was observed through transmission electron microscopy. Findings from this study propose the vacuum radiation strategy that can replace conventional vulcanization methods, resulting in NR films with high mechanical and barrier performance. Furthermore, the emission of toxic substances is reduced by this green process, making it practically useful for potential chemical-resistant examination glove applications.

権利情報:

  • In Copyright

    This is the peer reviewed version of the following article: N. H. Lazim, S. A. Shamsudin, N. M. Hidzir, C. C. Keong, I. Ichinose, J. Appl. Polym. Sci. 2024, 141(1), e54741, which has been published in final form at https://doi.org/10.1002/app.54741. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Use of Self-Archived Versions. This article may not be enhanced, enriched or otherwise transformed into a derivative work, without express permission from Wiley or by statutory rights under applicable legislation. Copyright notices must not be removed, obscured or modified. The article must be linked to Wiley’s version of record on Wiley Online Library and any embedding, framing or otherwise making available the article or pages thereof by third parties from platforms, services and websites other than Wiley Online Library must be prohibited.

キーワード: Rubber, Crosslink, E-Beam

刊行年月日: 2024-01-05

出版者: Wiley

掲載誌:

  • Journal of Applied Polymer Science (ISSN: 00218995) vol. 141 issue. 1 e54741

研究助成金:

原稿種別: 著者最終稿 (Accepted manuscript)

MDR DOI: https://doi.org/10.48505/nims.4657

公開URL: https://doi.org/10.1002/app.54741

関連資料:

その他の識別子:

連絡先:

更新時刻: 2024-09-26 08:30:24 +0900

MDRでの公開時刻: 2024-09-26 08:30:24 +0900

ファイル名 サイズ
ファイル名 [Clean] Manuscript.pdf (サムネイル)
application/pdf
サイズ 2.03MB 詳細