# Fileset

[Poster EU PVSEC 2026.pdf](https://mdr.nims.go.jp/filesets/c7b850e9-e03d-412a-9e8c-fd26133b1b27/download)

## Creator

SINGH Vishal, [YANAGIDA Masatoshi](https://orcid.org/0000-0002-8065-7875), Prabhakar Singh, [SHIRAI Yasuhiro](https://orcid.org/0000-0003-2164-5468), [KHADKA Dhruba Bahadur](https://orcid.org/0000-0001-9134-3890)

## Rights

[In Copyright](http://rightsstatements.org/vocab/InC/1.0/)

## Other metadata

[Additive Engineering of SnPb-Based Narrow Band Gap Perovskite Solar Cells Using Functional Molecule](https://mdr.nims.go.jp/datasets/6c37be09-9aa0-460e-8015-2701db375571)

## Fulltext

Additive Engineering of SnPb-Based Narrow Band Gap  Perovskite Solar Cells Using Functional MoleculesVishal Singh, Masatoshi Yanagida, Prabhakar Singh, Yasuhiro Shirai, Dhruba B. Khadka\*National Institute for Materials Science, Tsukuba, Japan; Indian Institute of Technology (BHU), Varanasi, IndiaNarrow-bandgap Sn-Pb halide perovskites (Eg∿1.2-1.3 eV) are promising absorbers  for high-efficiency single-junction and all-perovskite tandem solar cells. However,  rapid crystallization, Sn2+ oxidation, and high defect density lead to severe non- radiative recombination and limit device performance. Additive engineering is an  effective approach to regulate crystallization and passivate defects.Introduction- 1\. D. B. Khadka, et al. Adv. Energy Mater. 2022, 12, 2202029.- 2\. D. B. Khadka, et al. Nature Communications 15.1 (2024): 882.- 3\. D. B. Khadka, et al. Small 21.17 (2025): 2410048.- 4\. D. B. Khadka, et al. ACS Applied Materials \& Interfaces 17.18 (2025): 26813-26822.- 5\. D. B. Khadka, et al. Solar RRL 7.21 (2023): 2300535.- 6\. D. B. Khadka, et al. ACS applied materials \& interfaces 11.7 (2019): 7055-7065.- 7\. D. B. Khadka, et al. ACS applied materials \& interfaces 10.26 (2018): 22074-22082.- 8\. D. B. Khadka, et al. Journal of Materials Chemistry C 5.34 (2017): 8819-8827.Conclusion- ❑ GASCN effectively suppressed defect-assisted non-radiative recombination,  increasing the carrier lifetime from 35 to 77 ns.- ❑ Improved film quality and charge-carrier dynamics enhanced the power  conversion efficiency from 16.18% to 18.5%.This research was conducted under the International Cooperative Graduate Program (ICGP) of the National Institute for  Materials Science (NIMS), Japan, and the authors acknowledge the support of the Hitachi Foundation, Kurata grant.E-mail： \* KHADKA.B.Dhruba@nims.go.jpDevice Structure and Corresponding J-V Characteristics- ❑ FaTheme Under Discussion- ❑  Fabrication of narrow-bandgap SnPb halide perovskite solar cells- ❑  Defect passivation using guanidinium thiocyanate (GASCN) as an additive.- ❑  Enhanced power conversion efficiency from 16.18 % to 18.5 %.Experimental: film formationReferencesFuture PlanFigure 1. (a) Fabrication process of the narrow-bandgap SnPb perovskite films,  (b) Crystal Structure of SnPb perovskite with GASCN additive.MA+/FA+/Cs+Sn2+/Pb2+I-(a)(b)Figure 2. (a) Top-view SEM images and (b) XRD pattern of Sn-Pb perovskite filmsGASCNControl(a)(b)Figure 3. (a) Optical absorption spectra, (b) Photoelectron-yield spectraFigure 4. (a) Time-resolved PL decay curves, (b) Steady-state PL spectra\>\>\> Less affect of GASCN additive on absorption and HOMO level of Sn-Pb  halide perovskite.\>\>\> The enhanced average life time of carriers and peak intensity of  photoluminescence of SnPb halide perovskite film with optimized GASCN  additive indicates suppression of non-radiative recombinations.- ❑ To improve the optoelectronic quality of the SnPb perovskite film.- ❑ To investigate interfacial and charge-transport-layer engineering.- ❑ To examine Sn2+ oxidation, ion migration, and long-term device degradation  mechanisms.Enlarge  this value font(b)(a)(a)(b)- Slide 1