# Fileset

[Digest_Asai_20260106 - 修正箇所_TT_3.pdf](https://mdr.nims.go.jp/filesets/3d2d5e11-e8d9-497e-bb7c-d0f3ea873f5a/download)

## Creator

[Yuichi Hisada](https://orcid.org/0009-0000-5078-3371), Shigehiro Asai, Sachio Komori, [Yukiko K. Takahashi](https://orcid.org/0000-0001-9197-7236), [Tomoyasu Taniyama](https://orcid.org/0000-0003-3683-5416)

## Rights

© 2026 IEEE.  Personal use of this material is permitted.  Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.[In Copyright](http://rightsstatements.org/vocab/InC/1.0/)

## Other metadata

[Rotation of Uniaxial Magnetic Anisotropy Induced by Interface Roughness in Polycrystalline Co/Ru/Co Multilayers](https://mdr.nims.go.jp/datasets/7d7d4694-b0a7-4b6a-b832-54af548245de)

## Fulltext

Digest\_Asai\_20260106 - 修正箇所\_TT\_2  Rotation of uniaxial magnetic anisotropy induced by   interface roughness in polycrystalline Co/Ru/Co multilayers  &#32; Shigehiro Asai1, Yuichi Hisada1, Sachio Komori1, Yukiko K. Takahashi2, and Tomoyasu Taniyama1  &#32; 1Department of Physics, Nagoya University, Nagoya 464-8602, Japan, taniyama.tomoyasu.v2@f.mail.nagoya-u.ac.jp  2Research Center for Magnetic and Spintronic Materials, National Institute for Materials Science (NIMS),   Ibaraki 305-0047, Japan, TAKAHASHI.Yukiko@nims.go.jp  &#32; Uniaxial magnetic anisotropy is a key factor governing the magnetization process in magnetic multilayers. In many thin film systems,  the anisotropy axis is determined by crystallographic symmetry or growth-induced effects. In this study, we report a systematic rotation  of the uniaxial magnetic anisotropy axis in polycrystalline Co/Ru/Co multilayers as a function of interface roughness. We find the in- plane anisotropy axis rotates by controlling the roughness via buffer layer growth conditions. This behavior is observed in both  antiferromagnetically coupled and ferromagnetically coupled Co/Ru/Co multilayers, suggesting that the anisotropy rotation is not  limited to a specific coupling state. Control experiments on single-layer Co films show no such rotation, indicating that the phenomenon  originates from additional magnetic anisotropy due to the multilayer structure. Our results reveal that an additional parameter plays a  vital role for controlling anisotropy in magnetic multilayers.    Index Terms— interface roughness, magnetic anisotropy, magnetic multilayers, synthetic antiferromagnet    I. INTRODUCTION  O/Ru/Co multilayers exhibit interlayer exchange coupling  (IEC) that oscillates between ferromagnetic and  antiferromagnetic states as a function of the Ru spacer thickness  \[1\]. When the coupling is antiferromagnetic, the structure is  referred to as a synthetic antiferromagnet (SAF), which is  widely used in spintronic devices due to their reduced stray  fields and stable magnetic configuration \[2\].  Magnetic anisotropy plays a crucial role in determining the  magnetization behavior of magnetic multilayers. In epitaxial  systems, the anisotropy axis is governed by crystallographic  symmetry and/or epitaxial strain, whereas in polycrystalline or  amorphous films it is generally attributed to growth-induced  effects such as oblique deposition \[3\] or grain-related shape  anisotropy \[4\]. In these cases, the anisotropy direction is  typically regarded as being fixed by the growth conditions.  Interface roughness is known to significantly influence IEC  in SAF \[5\], \[6\]. However, its impact on magnetic anisotropy,  particularly in polycrystalline systems, remains unclear. In this  work, we investigate the relationship between interface  roughness and magnetic anisotropy in polycrystalline  Co/Ru/Co multilayers, showing that the uniaxial anisotropy  axis rotates in the film plane as the interface roughness varies.  II. EXPERIMENTS  Co/Ru/Co multilayers were deposited on thermally oxidized  Si(100) substrates using rf magnetron sputtering. The film  structure is Nb (3 nm)/Co (4 nm)/Ru (𝑡!")/Co (3 nm)/Nb (𝑡#$),  where 𝑡!"  and 𝑡#$  represent the thicknesses of the Ru  interlayer and Nb buffer layer thickness, respectively. 𝑡!"was  set to 0.7 nm or 1.3 nm, corresponding to the antiferromagnetic  and ferromagnetic IEC regions, respectively.  The interface roughness was controlled by varying the  thickness and sputtering power for the Nb buffer layer. The  surface morphology was evaluated using atomic force  microscopy (AFM), and the interface roughness was quantified  using the root-mean-square roughness (𝑅%) of single-layer Nb  samples deposited on Si substrates.  Microstructural and compositional characterization was  performed using a Spectra Ultra S/TEM (Thermo Fisher  Scientific) equipped with a probe aberration corrector and  energy-dispersive X-ray spectroscopy (EDX). Magnetic  properties were measured at room temperature using the  magneto-optical Kerr effect (MOKE). In-plane magnetization  curves were recorded for various in-plane magnetic field  orientations, and the ratio of the remanent magnetization to the  saturation magnetization (𝑀\& ∕ 𝑀') was plotted as a function of  the in-plane field angle to evaluate the magnetic anisotropy.  III. RESULTS AND DISCUSSIONS  Figure 1(a) shows the in-plane magnetic field orientation  dependence of 𝑀\& ∕ 𝑀'  for Co/Ru/Co multilayers with 𝑡!"  =  0.7 nm, where the two Co layers are antiferromagnetically  coupled. For samples with relatively small interface roughness,  uniaxial magnetic anisotropy is observed. As the interface  roughness increases, the anisotropy axis gradually rotates  within the film plane. When the 𝑅% approaches 𝑡!", that is 0.7  C  &#32; Fig. 1. In-plane field orientation dependence of 𝑀! ∕ 𝑀" for (a) 𝑡#$ = 0.7 nm  and (b) 𝑡#$ = 1.3 nm with different interface roughness. nm, 𝑀\& ∕ 𝑀'  increases and the angular dependence becomes  isotropic. Figure 1(b) presents the corresponding angular  dependence of 𝑀\& ∕ 𝑀'  for 𝑡!"  = 1.3 nm, where the two Co  layers are ferromagnetically coupled. In this case, all samples  exhibit uniaxial magnetic anisotropy, and a rotation of the  uniaxial magnetic anisotropy axis is clearly observed as a  function of interface roughness roughness. This is similar to the  case of 𝑡!"  = 0.7 nm, where 𝑅%  is relatively small. The  similarity in the behavior of the anisotropy rotation between the  antiferromagnetically and ferromagnetically coupled samples  suggests that this effect is not directly linked to the sign of IEC.  The increase in the remanent magnetization observed in  Fig. 1(a) is likely due to pinholes between the two Co layers \[7\].  Figure 2 shows cross-sectional EDX measurements for a  representative sample (𝑡!" = 1.3 nm, 𝑡#$ = 20 nm, deposited at  150 W). This figure indicates that in samples with a large 𝑅%  (i.e., relatively coarse interfaces), the Ru layer becomes locally  discontinuous, leading to direct ferromagnetic coupling  induced by pinholes (see the arrows in Fig.2). Since the samples  with 𝑡!" = 0.7 nm have only about half the Ru film thickness of  the sample in Fig. 2, the Co layers are expected to couple more  directly, making pinhole coupling dominant.  The rotation of the uniaxial magnetic anisotropy axis (see  Figs. 1(a) and (b)) cannot be explained by the generally known  origins of uniaxial anisotropy, such as magnetocrystalline  anisotropy or shape anisotropy. Magnetocrystalline anisotropy  is not expected in the case of polycrystalline and amorphous  thin films due to the random orientation of grains \[4\]. Uniaxial  magnetic anisotropy induced by the grain shape \[4\] is not  supported by AFM observations. Effects related to oblique  deposition \[3\] can also be ruled out since the substrates were  rotated at 7-8 rpm during film growth.  To further clarify the origin of the anisotropy rotation, control  experiments were performed on single-layer Co films without a  Ru spacer (𝑡!" = 0 nm). Figure 3 shows polar plots of 𝑀\& ∕ 𝑀'  for Nb (3 nm)/Co (7 nm)/Nb (𝑡#$)/Si prepared under various  buffer layer conditions. Unlike the Co/Ru/Co multilayers  (Figs. 1(a) and (b)), no systematic rotation of the uniaxial  magnetic anisotropy axis is observed in the Co single layers.  This result indicates that the anisotropy rotation is not an  intrinsic property of an individual Co layer.  Taken together, these observations suggest that the rotation  of the uniaxial magnetic anisotropy arises from the Co/Ru/Co  multilayer structure itself. It is conceivable that the magnetic  anisotropy induced by the average crystallographic orientation  of the top Co layer or changes in the ratio of pinhole coupling  to IEC may cause the rotation of the net uniaxial anisotropy axis.  These combined results demonstrate the importance of interface  roughness in determining magnetic anisotropy in  polycrystalline Co/Ru/Co multilayers.  IV. SUMMARY  We have demonstrated a systematic in-plane rotation of the  uniaxial magnetic anisotropy axis in polycrystalline Co/Ru/Co  multilayers by controlling the interface roughness. This rotation  likely originates from the average crystallographic orientation  of the top Co layer and/or the pinhole coupling ratio. Since no  such rotation of the anisotropy axis has been observed in single- layer Co films, this phenomenon arises from the additional  magnetic anisotropy associated with the multilayer structure.  These findings provide new insights into the control of  anisotropy in polycrystalline magnetic multilayers.   ACKNOWLEDGMENTS  This work was supported in part by JSPS KAKENHI Grant  Nos. JP24H00380, JP24K21732, JP23KK0086, JSPS  International Joint Research Program with the UK (JRP-LEAD  with UKRI) JPJSJRP20241705, JST FOREST JPMJFR212V. A  part of this work was supported by the Electron Microscopy  Unit, National Institute for Materials Science (NIMS).  REFERENCES  \[1\] S. S. P. Parkin, N. More, and K. P. Roche, “Oscillations in exchange cou- pling and magnetoresistance in metallic superlattice structures: Co/Ru,  Co/Cr, and Fe/Cr,” Phys. Rev. Lett., vol. 64, pp. 2304-2307, May 1990.  \[2\] R. A. Duine, K. -J. Lee, S. S. P. Parkin, and M. D. Stiles, “Synthetic anti- ferromagnetic spintronics,” Nat. Phys., vol. 14, pp. 217-219, March 2018.  \[3\] Y. Fukuma, Z. Lu, H. Fujiwara, G. J. Mankey, W. H. Butler, and S.  Matsunuma, “Strong uniaxial magnetic anisotropy in CoFe films on  obliquely sputtered Ru underlayer,” J. Appl. Phys., vol. 106, p. 076101,  October 2009.  \[4\] A. S. Dev, D. Kumar, P. Gupta, P. Vishwakarma, and A. Gupta, “Devel- opment of residual stress and uniaxial magnetic anisotropy during growth  of polycrystalline Co film,” Mater. Res. Bull., vol. 121, p. 110616, January  2020.  \[5\] S. O. Demokritov, “Biquadratic interlayer coupling in layered magnetic  systems,” J. Phys. D: Appl. Phys., vol. 31, pp. 925-941, April 1998.  \[6\] M. Desai, A. Misra, and W. D. Doyle, “Effect of interface roughness on  exchange coupling in synthetic antiferromagnetic multilayers,” IEEE  Trans. Magn., vol. 41, pp. 3151-3153, November 2005.  \[7\] J. F. Bobo, H. Kikuchi, O. Redon, E. Snoeck, M. Piecuch, and R. L. White,  “Pinholes in antiferromagnetically coupled multilayers: Effects on hyste- resis loops and relation to biquadratic exchange,” Phys. Rev. B, vol. 60,  pp. 4131-4141, August 1999.  &#32; Fig. 2. Cross-sectional EDX elemental mapping of a Co/Ru/Co multilayer  with 𝑡#$ = 1.3 nm and 𝑡%\& = 20 nm deposited at 150 W.  &#32; Fig. 3. In-plane field orientation dependence of 𝑀' ∕ 𝑀" for single-layer  Co films (𝑡#$ = 0 nm) prepared on various buffer layers.