# Fileset

[PDF](https://mdr.nims.go.jp/filesets/19d85a78-aa8b-4d39-bf15-807d11c98f83/download)

## Creator

[TANIFUJI, Mikiko](https://orcid.org/0000-0001-5284-6364)

## Rights

Creative Commons BY-NC-ND Attribution-NonCommercial-NoDerivs 4.0 International[Creative Commons BY-NC-ND Attribution-NonCommercial-NoDerivs 4.0 International](https://creativecommons.org/licenses/by-nc-nd/4.0/)

## Other metadata

[E-publishing of scientific research at academic institutions in Japan](https://mdr.nims.go.jp/datasets/cb322748-c6a1-43c2-bcfa-2a96abcfe863)

## Fulltext

untitledSession: Evolving Business Models for Hybrid Collections  1E-publishing of scientific research at academic institutions in Japan  Mikiko Tanifuji National Institute of Materials Science (NIMS), 1-2-1 Sengen, Tsukuba 305-0047, Japan E-mail: tanifuji.mikiko@nims.go.jp   An introduction to some initiatives by economics point of views that has been going in the field of science in Japan, that focus on e-journals from academic societies,  research laboratories and government agents. The economic model of these journal publishing are categorized in three models. Supported by 1) societies and their members (members fee), 2) institutions such as universities or research institutes (institution budge), and  3) a combination of government and institutions (institution budges and government funding). The main return is from the institutional subscriptions. The cost performance of the system development for e-journals publishing is not yet proved. However, society members or people related to journal publishing for scientific communities are quite aware of that it is more important to have own publishing system/method (not only computer system but also a development of human resources) to allow them to control themselves rather than outsourcing whole publishing roles outside Japan. It is true that most of organization have been struggling to balance the cost, especially, the development expenses of e-journals system and the income from e-journals sales. It is still hard to battle to a myth of impact factor to authors and readers. “The Third Science and Technology Basic Plan” by Japanese government has introduced a budget, 25 trillion yen for coming 5 years. New journals are appearing. I would like to introduce a summary of these activities and share the real problems behind those economics. Session: Evolving Business Models for Hybrid Collections  21. Introduction In Japan, there are more than 500 journals (Fig. 1) published by academic societies, not-for-profit organizations and government laboratories. About 23% of these journals are international peer-review journals, which are published exclusively in English, and nearly half of them have partnerships with professional publishers (Fig. 2). The rest of them receive support from agencies of the Japanese government or from private publishers. Most of these journals find it difficult to compete in the international marketplace and do not receive appropriate recognition for the quality of their published articles. This lack of recognition also means that these journals do not receive an appropriate number of citations, which in turn results in low impact factors and low subscription rates among customers outside Japan (Table 1). Ironically, these journals are not expensive, when considering the number of published pages they contain, and their low average annual increase in subscription costs when compared to the annual increase of the major commercial publishers.              Fig. 1 Journals published in English by fieldsAgriculture11%Biology18%Medical & Drug40%Physics &Chemistry20%Engineering11%Session: Evolving Business Models for Hybrid Collections  3    2. E-journals Most of the current e-journals were originally published in print form and then now changed to publishing both print and on-line forms. The economic models for paying for these publishing depended on the structure of the individual organization. (1) Publishing and economic models ・ Academic societies Their publishing costs are covered by (i) author publication charges, (ii) institutional subscriptions, (iii) individual membership fees and (iv) government funding. Their rates depend on the size of each society, the number of its members and the size of its journal(s). Although many major journals are available online nowadays, the cost of developing online editorial- and publication-systems including such as citation linking functions, and the cost of digitizing and indexing back issues, are initial investments, not covered by income from subscription. The subscription pricing are generally based on the costs of editorial, production and labor for current issues. Fig.2 Partner publishersElsevier8%Blackwell11%Japanese publishers5%Wiley3%Springer16%Japanese agency53%OUP4% Session: Evolving Business Models for Hybrid Collections  4 ・ Not-for-profit organizations and government agencies There have been three specific projects in Japan.  (i) One of them was an establishment of a non-profit organization, the Institute of Pure and Applied Physics (IPAP). IPAP is an umbrella organization for both physics and engineering societies, and it has successfully taken a leadership role in the e-publishing field. It provided the first full-text online publishing platform in late 1990’s, “IPAP Online Journals”1) (subscription model) and “IPAP Conference Series Online”2) (free access model).  (ii) The second one is the initiative that was taken by a government agency, the Japan Science and Technology Agency (JST), developed the platform for e-journals, “J-Stage”3) with government funding since 1999. JST brought together more than 250 journals (journals published in English) from various academic societies and organizations. This government-funded project accelerated and supported the publishing of e-journals by academic societies and organizations.  (iii) The third one is an establishment of e-journal subscription agency, “UniBio Press”4) in 2004 with a government support. UniBio Press aims to support marketing and sales site-licensings of e-journals for academic societies in biology.  All projects have demonstrated the economies of scale in e-journal publishing systems. They have also shown that these projects have contributed in improving services for not only society members, but also journal authors, reviewers, editors and subscribers such as more rapid publishing workflow systems, while maintaining high quality copy editing and dealing with large quantities of articles with limited human resources, without putting those investments onto subscription pricing.  ・ Research laboratories Since 2000, the National Institute for Materials Science (NIMS) has published a peer-review journal, “Science and Technology of Advanced Materials”.5) Since 2004, National Information Informatics has renewed the journal, “Progress in Informatics”6) as an interdisciplinary forum for researchers and practitioners of informatics. Both cases tend to indicate that national research laboratories are becoming aware that it is now important to create publishing Session: Evolving Business Models for Hybrid Collections  5platforms, edited by academics in particular research fields, which are open to the public in order to engage society.  ・ Professional publishers There are only a few major publishers in Japan. They publish only 53% of Japan’s journals while the remainders are published either in partnership with, or exclusively by publishers outside Japan (Fig. 2). This produces two negative consequences for Japan. One is that a large proportion of the financial underpinning of Japanese research by the Japanese government flows out of Japan each year. And the other is that this outflow of publishing undermines Japan’s publishing industry. There is an awareness in Japan of the pressing need for the Japanese publishing industry to compete in terms of quality and function in e-publishing, but clearly the industry has not developed to the point where it is able to compete on a worldwide basis7).  (2) Pricing of e-journals8) Japanese e-journals, up to the present, have not been affected by the ‘Big Deal’. The subscription price, per printed page, of journals related to materials science that NIMS subscribes to, are as follows. Materials science journals published in Japan are generally less than half of others.                Table 1. Subscription pricing per printed page: NIMS caseField Producer Journal pages/year price/page[yen]Materials Governmet/Publisher A 1000 65Optics Publisher B 1100 482Optics Publisher C 1000 359Materials Publisher D 3068 127Materials Publisher E 5448 65Materials Publisher F 6601 216Optics Society (Jpn) G 420 261Materials/Engneering Society (Jpn) H 10300 17Physics Society (Jpn) I 3400 25Materials Society (Jpn) J 3091 4Optics Society (USA) K 2900 86Materials Society (USA) L 3448 36  Session: Evolving Business Models for Hybrid Collections  6 (3) New e-journals9) New journals have appeared in the last five years that cover specific research area by academic communities. Further e-journals will appear in 2007. For example;  Plasma and Fusion Research was launched 2006, published by the Japan Society of Plasma Science and Nuclear Fusion Research. The journal is an Open Access journal supported by the society and author-publication charge.  BIOPHYSICS was launched in 2005, published by The Biophysical Society of Japan. The society intends to publish a journal to promote biophysical research in the Asian-Pacific Area. The Editorial Board consists of scientists in China, Taiwan, Hong Kong, Korea, India and Australia as well as Japan.  e-Journal of Surface Science and Nanotechnology was launched 2003, published by The Surface Science Society. The journal presents quick and versatile-style publication platform for research papers collecting from the broad range of surface science filed. This is free publication charge, and is the society-sponsored Open Access journal.  The Japan Society of Mechanical Engineers has planed that establishes new e-journals under each umbrella division of the society. There are/will be appearing four titles; J. Fluid Sci. & Technol., J. Thermal Sci. & Technol., J. Biomechanical Sci. & Eng., J. Environment & Eng., J. Mechanics, Mater. & Processing toward 2007.  Chemistry - An Asian Journal was launched in 2006, and is co-owned by 6 societies; the Chinese Chemical Society, the Chemical Research Society of India, the Chemical Society of Japan, the Korean Chemical Society, the Singapore National Institute of Chemistry, and the Chemical Society Located in Taipei, China, which form the Asian Chemical Editorial Society (ACES). The journal has cooperated with a journal, Angewandte Chemie that is published by the German Chemical Society.  There are several backgrounds behind of these launches. One of them is that papers as an achievement of scientific research, which is usually funded by government, has increasingly been published in journals outside Japan.7) Academic societies and organizations has strengthened not only e-publishing speed or functions, but also distributing worldwide to get wider recognition and receiving higher citations, and to reach higher status of journals. There are great editorial efforts also involved, as an essential mission of academic journals, such as Session: Evolving Business Models for Hybrid Collections  7international editorial boards’ members, web-based editorial and manuscript tracking services, focused issues on active topics in specific research fields, so on.   3. Government policy The Japanese Council of Science and Technology has introduced the third term of its Science and Technology Basic Plan. The budget for this plan has been increased as follows: first term, 17 trillion by FY1996, second term, 24 trillion by FY2001 and third term 25 trillion for FY2010. The White Paper on Science and Technology 200510) regarding Trends Related to Research Performance states as follows: Scientific papers are the results of R&D. … Of the scientific papers published in major scientific journals around the world between 1981 and 2003, Japan’s share of scientific papers and citations was as shown in Figure 2-3-1. Japan’s share of scientific papers in 1981 was fourth in the world, after the United States, the United Kingdom, and Germany. However, ever since Japan surpassed the United Kingdom in 1992 to obtain the No.2 ranking, Japan has maintained its position at No.2. Moreover, since excellent papers tend to attract large numbers of citations in other papers, the number of citations can be viewed as one indicator of a paper’s quality. A look at the number of citations of papers authored by Japanese researchers through the year 2000 by year of publication reveals that Japan’s share of total citations has tended to rise over time. Nevertheless, Japan has ranked after the United States, the United Kingdom, and Germany in the number of citations ever since 1989, and the ratio to total citations remains much lower than the share of the total number of scientific papers published (Figure 2-3-1).  Session: Evolving Business Models for Hybrid Collections  8   Session: Evolving Business Models for Hybrid Collections  9The report mentioned that it is impossible to make a simple comparison between scientific papers because of the language normally used by the researchers and the language they are written in, etc. However, there are certain trends that we can observe, that are shown between the number of scientific papers and the number of citations. The analysis is resourced on the database18 compiled by the Thomson Scientific. (Source: White Paper on Science and Technology, 2005)   4. Trials, Web portal sites NIMS is supporting the development of a trial project, a web-based community for research activities called “e-materials.net” 11). The missions of this portal are firstly, to strengthen the information infrastructure within the laboratory, and secondly, to provide a web-based tool for use by the materials science community, designed to provide a key function, Semantic Associate Search in Materials Science. This search function will focus specifically on academic literature; academic articles from major journals, patents, information from institutional repositories and databases or data books. These web-resource materials will be made available through cooperative relationships with major organizations and laboratories. This project in now in development, and will be available by the end of 2006.    In parallel with the project, another web service, "Materials Journal Portal Site"12) was launched recently by a group of academic societies and institutions, and they took the initiative specifically collecting information about academic journals for both researchers and engineers in the filed of materials science.   5. Conclusions It is clear that there is high publication rate of academic papers produced in Japan (Figure 2-3-1). This means that there is a lot of research being done in Japan, and that there is a high output of academic papers being generated from that research. It is natural that those in Japan responsible for funding higher education and research, and those supporting and involved in research in Japan’s various institutions, should be concerned about the high proportion of Japanese research papers being published outside Japan. This phenomenon has the effect of threatening the survival of Japanese academic journals, particularly as they incur the added expenses of trying to both develop digital versions of their publications, and create a sound economic model for their distribution on the internet. Session: Evolving Business Models for Hybrid Collections  10This problem will not be easy to solve, and it is anticipated that the phenomenon of many researchers wanting to publish outside Japan will continue for the near future. However, Japanese e-journals will vigorously compete in this market, and continuously improve their functionalities to attract a greater audience and to survive in the worldwide marketplace.   6. Acknowledgement The author would like to express her hearty thanks to Seiji Hosokawa, National Information Informatics (NII), for his support of recent data in societies’ journals in Japan. And also special thank to Prof. Shun Tsuchiya at Chiba University, Yuko Nagai, Executive Director of SPARC/Japan Initiative for their valuable suggestions. This overview is based on the author’s former workplace, the Institute of Pure and Applied Physics.   7. References 1) http://www.ipap.jp 2) http://www.ipap.jp/index_proceedings.html 3) http://info.jstage.jst.go.jp/eng/index.html 4) http://www.ll.chiba-u.ac.jp/~kikaku/online/EJ/unibio.html [in Japanese] 5) http://e-materials.net/stam/ 6) http://www.nii.ac.jp/pi/ 7) See the president’s statement of the Science Council of Japan, May 2005, http://www.scj.go.jp/ja/info/comment/050915.html [in Japanese].  See also S. Murase: J. Information Processing & Managements 47 (2004) 149 [in Japanese]. 8) E. Harada, R. Watanabe, N. Kojima and M. Muzuno: J. Information Processing & Management 45 (2003) 770 [in Japanese]. 9) See the URL for e-journals in details. Plasma and Fusion Research, http://www.jspf.or.jp/eng/journal.html Biophysics, http://www.biophys.jp/Journal/biophyssubmit.html e-Journal of Surface Science and Nanotechnology, http://www.sssj.org/ejssnt/ Journal of Fluid Science and Technology, http://www.jsme.or.jp/publish/notice.htm 10) White Paper on Science and Technology, Ministry of Education, Culture, Sports, Science and Technology, Session: Evolving Business Models for Hybrid Collections  11http://www.mext.go.jp/english/news/2005/12/05121301.htm 11) http://e-materials.org/home 12) http://matjournal.org/