19 records found. Displaying records 1 to 10.
Numerical Analysis to Evaluate the Effect of Cooling Rates on Microstructures in Casted Cu-Ni-Si Alloys by Phase-Field Simulation
- Journal article
- Creator
-
;Yuki Muto (author) (Search by this author)JX Nippon Mining & Metals;Kazuki Kammuri (author) (Search by this author)JX Nippon Mining & Metals;Junji Miyake (author) (Search by this author)JX Nippon Mining & MetalsMachiko Ode (author) (Search by this author)Research Center for Structural Materials/Materials Evaluation Field/Structural Thermodynamics Group, National Institute for Materials Science
;
;Tetsusei Kurashiki (author) (Search by this author)Graduate School of Engineering, Osaka UniversityHiroaki Mori (author) (Search by this author)Graduate School of Engineering, Osaka University - Keyword
- Phase-field model, Microstructure, Colson alloy
- Date published
- 2024-12-01
- Updated at
- 2025-01-25 08:30:38 +0900
Achieving high productivity in wire-arc directed energy deposition of magnesium alloy thin-walled structures via active cooling
- Journal article
- Creator
-
;Hyu Kudo (author) (Search by this author)Houichi Kitano (author) (Search by this author)
;
;Hiroyuki Sasahara (author) (Search by this author)Hideaki Nagamatsu (author) (Search by this author)
https://orcid.org/0000-0002-4702-0397
(unauthenticated)
- Keyword
- Wire-arc directed energy deposition, Manufacturing rate, Magnesium alloy, Microstructure, Tensile properties, Fractography, Smut
- Date published
- 2026-06-16
- Updated at
- 2026-06-22 15:52:11 +0900
Fe-15Mn-10Cr-8Ni-4Si bidirectional-TRIP鋼の極低サイクル疲労に及ぼすひずみ速度の影響
- Journal article
- Creator
-
吉中 奎貴 (author) (Search by this author)National Institute for Materials Science
;
長島 伸夫 (author) (Search by this author)National Institute for Materials Science
;
澤口 孝宏 (author) (Search by this author)National Institute for Materials Science
- Keyword
- Fatigue, Fracture surface, Extremely low cycle fatigue, Microstructure, Martensitic transformation, Seismic damper
- Date published
- 2023-12-15
- Updated at
- 2024-09-30 16:30:40 +0900
Phase composition and magnetic properties of Nd(Pr)2Fe14B and (Sm,Zr)Fe11Ti magnets produced by selective laser melting
- Conference poster
- Collection
- The 28th International Workshop on Rare Earth and Future Permanent Magnets and Their Applications (REPM2025)
- Creator
-
;Sergey Andreev (author) (Search by this author)Ural Federal University, Russia;Viktoria Maltseva (author) (Search by this author)Ural Federal University, Russia;Dmitriy Neznakhin (author) (Search by this author)Ural Federal University, Russia;Arkadiy Shalaginov (author) (Search by this author)Ural Federal University, Russia;Andrey Urzhumtsev (author) (Search by this author)Ural Federal University, RussiaAlexey Volegov (author) (Search by this author)Ural Federal University, Russia
- Keyword
- REPM2025, Additive manufacturing, Selective laser melting, Permanent magnets, Phase composition, Microstructure
- Date published
- Updated at
- 2025-09-11 16:30:51 +0900
Effect of tempering temperatures on the fatigue behavior of 0.6% C martensitic steel
- Journal article
- Creator
-
Jiaqiang Dang (author) (Search by this author)
https://orcid.org/0000-0002-7446-8234
(unauthenticated)
;
Sien Liu (author) (Search by this author)
https://orcid.org/0009-0007-7446-0842
(unauthenticated)
;
;Eisuke Kazama (author) (Search by this author);Ryuji Yabutani (author) (Search by this author);Karel Blanken (author) (Search by this author)Fabien Briffod (author) (Search by this author)
;
Shoichi Nambu (author) (Search by this author)
https://orcid.org/0009-0002-5736-1504
(unauthenticated)
- Keyword
- 0.6% C martensitic steel, Warm tempering, Microstructure, Fracture toughness, Bending fatigue
- Date published
- 2026-08-04
- Updated at
- 2026-08-24 11:26:08 +0900
High-coercivity SmFe12-based anisotropic sintered magnets by Cu addition
- Journal article
- Creator
-
;A.K. Srinithi (author) (Search by this author)Xin Tang (author) (Search by this author)National Institute for Materials Science
;
H. Sepehri-Amin (author) (Search by this author)National Institute for Materials Science
;
;J. Zhang (author) (Search by this author)National Institute for Materials ScienceT. Ohkubo (author) (Search by this author)National Institute for Materials Science
;
K. Hono (author) (Search by this author)National Institute for Materials Science
- Keyword
- Hard magnets, SmFe12 sintered magnets, Coercivity, Microstructure
- Date published
- 2023-06-26
- Updated at
- 2025-07-08 15:15:26 +0900
Cross-sectional microstructure observation of YBa2Cu3O7-δ multifilament films fabricated on Nb stripes
- Journal article
- Creator
-
;T. Wada (author) (Search by this author);H. Fujimoto (author) (Search by this author);Y. Kawahara (author) (Search by this author)A. Matsumoto (author) (Search by this author)
;
S. Ooi (author) (Search by this author)
;
M. Tachiki (author) (Search by this author)
;
R. Teranishi (author) (Search by this author)
- Keyword
- YBa₂Cu₃O7-δ superconducting film, Multifilamentation, Film growth, Microstructure, Cross-sectional TEM
- Date published
- 2025-12-22
- Updated at
- 2025-12-26 14:15:29 +0900
Thermal radiation enhancement by thermal extraction of silicon micropyramids
- Conference poster
- Creator
-
Ryugo Hosokawa (author) (Search by this author)Research Center for Materials Nanoarchitectonics (MANA)/Nanomaterials Field/Optical Nanostructure Team, National Institute for Materials Science
;
;Etsuko Shimada (author) (Search by this author)Research Center for Materials Nanoarchitectonics (MANA)/Nanomaterials Field/Optical Nanostructure Team, National Institute for Materials Science;Chia-Hung Wu (author) (Search by this author)Satoshi Ishii (author) (Search by this author)Research Center for Materials Nanoarchitectonics (MANA)/Nanomaterials Field/Optical Nanostructure Team, National Institute for Materials Science
- Keyword
- Thermal radiation, Microstructure
- Date published
- Updated at
- 2024-11-06 16:30:47 +0900
Compositionally graded titanium to aluminum processed by laser powder bed fusion process: Microstructure evolution and mechanical properties
- Journal article
- Creator
-
Phuangphaga Daram (author) (Search by this author)National Institute for Materials Science
;
Alok Singh (author) (Search by this author)National Institute for Materials Science
;
Takanobu Hiroto (author) (Search by this author)National Institute for Materials Science
;
Tomonori Kitashima (author) (Search by this author)National Institute for Materials Science
;
Makoto Watanabe (author) (Search by this author)National Institute for Materials Science
- Keyword
- Laser powder bed fusion process, Compositionally graded materials, Ti–Al alloy, Microstructure, Mechanical properties
- Date published
- 2024-05-15
- Updated at
- 2024-06-24 10:01:25 +0900
Superstoichiometric (Al,Cr)N: Nitrogen's whereabouts and role in structure-property relationships
- Journal article
- Creator
-
;F.F. Klimashin (author) (Search by this author);M. Učík (author) (Search by this author);M. Matas (author) (Search by this author);D. Holec (author) (Search by this author);M. Beutner (author) (Search by this author);M. Hackert-Oschätzchen (author) (Search by this author);A. Xomalis (author) (Search by this author);J.J. Schwiedrzik (author) (Search by this author);J. Klusoň (author) (Search by this author);M. Jílek (author) (Search by this author);A. Lümkemann (author) (Search by this author);J. Michler (author) (Search by this author)T.E.J. Edwards (author) (Search by this author)National Institute for Materials Science
- Keyword
- (Al,Cr)NSuperstoichiometry, Point defects, Microstructure, Hardness, Fracture toughness, Wear resistance
- Date published
- 2025-05-19
- Updated at
- 2025-07-23 16:30:23 +0900