26 records found. Displaying records 1 to 10.
Mechanical behaviours of hot-pressed rare-earth oxide (RE = Y and La)-doped TaB2-SiC composites
- Journal article
- Creator
-
Shuqi Guo (author) (Search by this author)National Institute for Materials Science
;
Gaku Okuma (author) (Search by this author)National Institute for Materials Science
;
Kimiyoshi Naito (author) (Search by this author)National Institute for Materials Science
;
Hideki Kakisawa (author) (Search by this author)National Institute for Materials Science
- Keyword
- TaB2, SiC, Rare-earth oxide, Microstructure, Mechanical properties
- Date published
- 2023-10-29
- Updated at
- 2024-09-12 11:08:33 +0900
Strength-limiting defects evolved from heterogeneities during the sintering of high-purity submicron alumina powder
- Journal article
- Creator
-
Gaku Okuma (author) (Search by this author)Research Center for Structural Materials/Materials Manufacturing Field/Ceramic Matrix Composites Group, National Institute for Materials Science
;
;Tsukasa Shimizugawa (author) (Search by this author)Yokohama National University;Shingo Ozaki (author) (Search by this author)Yokohama National UniversityToshio Osada (author) (Search by this author)Research Center for Structural Materials/Materials Manufacturing Field/High-Reliability Heat-Resistant Materials Group, National Institute for Materials Science
;
;Shingo Machida (author) (Search by this author)JFCC;Yutaro Arai (author) (Search by this author)Tokyo university of science;Ryo Inoue (author) (Search by this author)Tokyo university of scienceHideki Kakisawa (author) (Search by this author)Research Center for Structural Materials/Materials Manufacturing Field/Ceramic Matrix Composites Group, National Institute for Materials Science
;
;Yuki Sada (author) (Search by this author)Japan Synchrotron Radiation Research Institute (JASRI);Masayuki Uesugi (author) (Search by this author)Japan Synchrotron Radiation Research Institute (JASRI);Akihisa Takeuchi (author) (Search by this author)Japan Synchrotron Radiation Research Institute (JASRI)Fumihiro Wakai (author) (Search by this author)Research Center for Structural Materials/Materials Manufacturing Field/Ceramic Matrix Composites Group, National Institute for Materials Science
- Keyword
- Sintering, Synchrotron X-ray tomography, Microstructure, Defects, Fracture
- Date published
- 2025-07-16
- Updated at
- 2025-07-23 12:30:20 +0900
High-resistivity anisotropic hot-deformed Nd-Fe-B magnets prepared from DyF3 electrophoretic deposited powders
- Journal article
- Creator
-
Z.H. Kautsar (author) (Search by this author)National Institute for Materials Science
;
H. Sepehri-Amin (author) (Search by this author)National Institute for Materials Science
;
Xin Tang (author) (Search by this author)National Institute for Materials Science
;
R. Iguchi (author) (Search by this author)National Institute for Materials Science
;
K. Uchida (author) (Search by this author)National Institute for Materials Science
;
T. Ohkubo (author) (Search by this author)National Institute for Materials Science
;
K. Hono (author) (Search by this author)National Institute for Materials Science
- Keyword
- Electrical resistivity, Microstructure, Nd-Fe-B, Permanent magnets
- Date published
- 2023-01-13
- Updated at
- 2024-09-26 12:30:12 +0900
Microstructure and phase evolution of functionally graded multi-materials of Ni–Ti alloy fabricated by laser powder bed fusion process
- Journal article
- Creator
-
Phuangphaga Daram (author) (Search by this author)National Institute for Materials Science
;
Takanobu Hiroto (author) (Search by this author)National Institute for Materials Science
;
Makoto Watanabe (author) (Search by this author)National Institute for Materials Science
- Keyword
- Laser powder bed fusion process, Functionally graded materials, Ni-Ti alloy, Microstructure, Compositional gradient
- Date published
- 2023-02-28
- Updated at
- 2024-06-21 16:30:21 +0900
Compositionally graded titanium to aluminum processed by laser powder bed fusion process: Microstructure evolution and mechanical properties
- Journal article
- Creator
-
Phuangphaga Daram (author) (Search by this author)National Institute for Materials Science
;
Alok Singh (author) (Search by this author)National Institute for Materials Science
;
Takanobu Hiroto (author) (Search by this author)National Institute for Materials Science
;
Tomonori Kitashima (author) (Search by this author)National Institute for Materials Science
;
Makoto Watanabe (author) (Search by this author)National Institute for Materials Science
- Keyword
- Laser powder bed fusion process, Compositionally graded materials, Ti–Al alloy, Microstructure, Mechanical properties
- Date published
- 2024-05-15
- Updated at
- 2024-06-24 10:01:25 +0900
An explicit integration approach for predicting the microstructures of multicomponent alloys
- Journal article
- Creator
-
Takumi Morino (author) (Search by this author)
https://orcid.org/0009-0005-0134-7713
(unauthenticated)
;
Machiko Ode (author) (Search by this author)
;
Shoichi Hirosawa (author) (Search by this author)
https://orcid.org/0000-0002-6572-2552
(unauthenticated)
- Keyword
- Phase-field model, Multi-composnet alloy, CALPHAD, Microstructure
- Date published
- 2025-07-15
- Updated at
- 2026-01-22 15:26:05 +0900
Phase composition and magnetic properties of Nd(Pr)2Fe14B and (Sm,Zr)Fe11Ti magnets produced by selective laser melting
- Conference poster
- Collection
- The 28th International Workshop on Rare Earth and Future Permanent Magnets and Their Applications (REPM2025)
- Creator
-
;Sergey Andreev (author) (Search by this author)Ural Federal University, Russia;Viktoria Maltseva (author) (Search by this author)Ural Federal University, Russia;Dmitriy Neznakhin (author) (Search by this author)Ural Federal University, Russia;Arkadiy Shalaginov (author) (Search by this author)Ural Federal University, Russia;Andrey Urzhumtsev (author) (Search by this author)Ural Federal University, RussiaAlexey Volegov (author) (Search by this author)Ural Federal University, Russia
- Keyword
- REPM2025, Additive manufacturing, Selective laser melting, Permanent magnets, Phase composition, Microstructure
- Date published
- Updated at
- 2025-09-11 16:30:51 +0900
Effects of substrate preheating and processing parameters on the crystallographic texture of Hastelloy X on SX-like Ni fabricated by L-PBF process with flat-top laser beam
- Journal article
- Creator
-
Phuangphaga Daram (author) (Search by this author)
;
Fabien Briffod (author) (Search by this author)
;
Tomonori Kitashima (author) (Search by this author)
;
Masahiro Kusano (author) (Search by this author)
;
Makoto Watanabe (author) (Search by this author)
- Keyword
- Hastelloy X, Laser powder bed fusion process, Substrate preheating, Microstructure, Texture, Stray grains
- Date published
- 2026-01-20
- Updated at
- 2026-02-16 17:22:12 +0900
Experimental determination of phase equilibria in the Co–Cr–Si ternary system
- Journal article
- Creator
-
Kazushige Ioroi (author) (Search by this author)
https://orcid.org/0000-0002-7051-8345
(unauthenticated)
;
;Shunya Mochimaru (author) (Search by this author);Xiao Xu (author) (Search by this author)Ryosuke Kainuma (author) (Search by this author)
https://orcid.org/0000-0003-0713-6106
(unauthenticated)
;
Toshihiro Omori (author) (Search by this author)
- Keyword
- Cobalt-Chromium-Silicon, Phase diagram, Microstructure, Phase transformation, Metallic biomaterials
- Date published
- 2026-08-07
- Updated at
- 2026-10-29 08:43:02 +0900
Microstructure and coercivity of Al-diffused Sm(Fe,Co,B)12 film
- Journal article
- Creator
-
H. Sepehri-Amin (author) (Search by this author)National Institute for Materials Science
;
N. Kulesh (author) (Search by this author)National Institute for Materials Science
;
;Y. Mori (author) (Search by this author)T. Ohkubo (author) (Search by this author)National Institute for Materials Science
;
K. Hono (author) (Search by this author)National Institute for Materials Science
;
T. Shima (author) (Search by this author)
- Keyword
- Magnetic thin films, Coercivity, Microstructure, Sm(Fe0.8Co0.2)12
- Date published
- 2023-12-27
- Updated at
- 2024-08-23 12:30:20 +0900