Distinctive fatigue properties of additively-formed CoCrFeNiTiMo multi-principal element alloy: Excellent fatigue crack growth resistance against ordinally high cycle fatigue strength
- Journal article
- Creator
-
Hideaki Nishikawa (author) (Search by this author)National Institute of Materials Science (NIMS)
;
;Yoshiyuki Furuya (author) (Search by this author)National Institute of Materials Science (NIMS);Houichi Kitano (author) (Search by this author)National Institute of Materials Science (NIMS);Yoshiharu Kanegae (author) (Search by this author)Proterial, Ltd.;Kinya Aota (author) (Search by this author)Proterial, Ltd.Kosuke Kuwabara (author) (Search by this author)Proterial, Ltd. - Keyword
- Fatigue, Additive manufacturing, High entropy alloy, Multi principal element alloy, Short fatigue crack
- Date published
- 2023-11-25
- Updated at
- 2025-11-25 08:30:10 +0900
Fabrication of Sm-Co-Fe-Cu-Zr and SrFe12O19 based permanent magnets by PIM-technology and stereolithography methods
- Conference poster
- Collection
- The 28th International Workshop on Rare Earth and Future Permanent Magnets and Their Applications (REPM2025)
- Creator
-
;Bogdan Dmitrievich Chernyshev (author) (Search by this author)Giredmet JSC, RussiaIgor Viktorovich Shchetinin (author) (Search by this author)NUST MISIS, Russia
- Keyword
- REPM2025, Sm-Co, Strontium hexaferrite, PIM-technology, SLA, Additive manufacturing, Green body, Brown body, Sintered magnet
- Date published
- Updated at
- 2025-09-11 16:31:19 +0900
Acoustic emission monitoring reveals keyhole formation and evolution
- Journal article
- Creator
-
;Louis Galiègue (author) (Search by this author)Fabien Briffod (author) (Search by this author)
;
Kaita Ito (author) (Search by this author)
;
;Hiroshige Masuo (author) (Search by this author)Makoto Watanabe (author) (Search by this author)
;
;Takayuki Shiraiwa (author) (Search by this author)Manabu Enoki (author) (Search by this author)
- Keyword
- Acoustic emission, Additive manufacturing, Keyhole
- Date published
- 2025-12-05
- Updated at
- 2025-12-10 08:30:07 +0900
An integrated computational materials engineering framework for process-structure-property mapping in laser powder bed fusion
- Journal article
- Creator
-
Fabien Briffod (author) (Search by this author)
;
Phuangphaga Daram (author) (Search by this author)
;
Masahiro Kusano (author) (Search by this author)
;
Makoto Watanabe (author) (Search by this author)
- Keyword
- Additive manufacturing, Crystal plasticity, Microstructure, Cellular automata
- Date published
- 2025-11-14
- Updated at
- 2025-11-17 16:30:03 +0900
On the Enhanced Creep Performance in Ti6246 Achieved Through Laser Powder Bed Fusion (LPBF) Processing
- Journal article
- Creator
-
;Prince Valentine Cobbinah (author) (Search by this author);Sae Matsunaga (author) (Search by this author)Yoshiaki Toda (author) (Search by this author)
;
;Ryosuke Ozasa (author) (Search by this author);Takuya Ishimoto (author) (Search by this author);Takayoshi Nakano (author) (Search by this author);Tsutomu Ito (author) (Search by this author)Yoko Yamabe-Mitarai (author) (Search by this author)
- Keyword
- Additive manufacturing, Crystallographic analysis, Heat-resistant titanium alloys, Microstructure, Precipitation, Volumetric energy density
- Date published
- 2025-04-10
- Updated at
- 2025-06-04 17:16:18 +0900
Investigating synergistic effects of process-induced defects and α phase substructures on the mechanical response of additively manufactured Ti-6Al-4V alloy via an integrated numerical framework
- Journal article
- Creator
-
Hanqing Liu (author) (Search by this author)
https://orcid.org/0000-0003-4768-4326
(unauthenticated)
;
Fabien Briffod (author) (Search by this author)
;
Takayuki Shiraiwa (author) (Search by this author)
https://orcid.org/0000-0002-0999-0798
(unauthenticated)
- Keyword
- Ti-6Al-4V, Additive manufacturing, Defect, α-phase substructure, Crystal plasticity finite element method
- Date published
- 2026-06-05
- Updated at
- 2026-06-11 15:16:24 +0900
Comparison of hydrogen diffusion properties and hydrogen-induced ductility loss of additively and conventionally manufactured 17-4PH stainless steel
- Journal article
- Creator
-
;Junichiro Yamabe (author) (Search by this author);Soma Kato (author) (Search by this author);Kazuyuki Morishita (author) (Search by this author)Kentaro Wada (author) (Search by this author)National Institute for Materials Science
- Keyword
- Hydrogen embrittlement, 17-4 PH steel, Additive manufacturing, Slow strain-rate tensile testing, Retained austenite
- Date published
- 2024-05-14
- Updated at
- 2024-12-17 15:58:49 +0900
Controllable inverse design of auxetic metamaterials using deep learning
- Journal article
- Creator
-
;Xiaoyang Zheng (author) (Search by this author);Ta-Te Chen (author) (Search by this author)National Institute for Materials Science;Xiaofeng Guo (author) (Search by this author)Sadaki Samitsu (author) (Search by this author)National Institute for Materials Science
;
Ikumu Watanabe (author) (Search by this author)National Institute for Materials Science
- Keyword
- Negative Poisson’s ratio, Metamaterial, Generative adversarial network, Additive manufacturing, Voronoi tessellation
- Date published
- 2021-10-18
- Updated at
- 2024-01-05 22:12:12 +0900
Oxidation Properties of Additively Manufactured High Entropy Alloys: A Short Review
- Journal article
- Creator
-
;Jhuo-Lun Lee (author) (Search by this author);An-Chou Yeh (author) (Search by this author)Hideyuki Murakami (author) (Search by this author)National Institute for Materials Science
- Keyword
- Oxidation properties, Additive manufacturing, High entropy alloys
- Date published
- 2024-09-23
- Updated at
- 2025-09-23 08:30:15 +0900
In-Depth investigation of the sub-micronic equiaxed grain microstructure of a NdFeB permanent magnet fabricated by Laser Powder Bed Fusion
- Conference presentation
- Collection
- The 28th International Workshop on Rare Earth and Future Permanent Magnets and Their Applications (REPM2025)
- Creator
-
;Aymeric Wolz (author) (Search by this author)CEA (French Alternative Energies and Atomic Energy Commission), France;Jean-Paul Garandet (author) (Search by this author)CEA (French Alternative Energies and Atomic Energy Commission), France;Camille Flament (author) (Search by this author)CEA (French Alternative Energies and Atomic Energy Commission), FranceOlivier Tosoni (author) (Search by this author)CEA (French Alternative Energies and Atomic Energy Commission), France
- Keyword
- REPM2025, Laser Powder Bed Fusion (LPBF), Additive manufacturing, NdFeB, Microstructure investigation, Columnar to equiaxed transition (CET)
- Date published
- Updated at
- 2025-09-11 16:31:28 +0900