14 records found. Displaying records 1 to 10.
Oxidation Properties of Additively Manufactured High Entropy Alloys: A Short Review
- Journal article
- Creator
-
;Jhuo-Lun Lee (author) (Search by this author);An-Chou Yeh (author) (Search by this author)Hideyuki Murakami (author) (Search by this author)National Institute for Materials Science
- Keyword
- Oxidation properties, Additive manufacturing, High entropy alloys
- Date published
- 2024-09-23
- Updated at
- 2025-09-23 08:30:15 +0900
Cellular automata simulations of texture evolution in flat-top laser additively manufactured Hastelloy-X
- Journal article
- Creator
-
Fabien Briffod (author) (Search by this author)
;
;Phuangphaga Daram (author) (Search by this author);Tomonori Kitashima (author) (Search by this author)Makoto Watanabe (author) (Search by this author) - Keyword
- Cellular automata, Additive manufacturing, Texture, Microstructure
- Date published
- 2026-06-30
- Updated at
- 2026-07-03 12:48:41 +0900
Comparison of hydrogen diffusion properties and hydrogen-induced ductility loss of additively and conventionally manufactured 17-4PH stainless steel
- Journal article
- Creator
-
;Junichiro Yamabe (author) (Search by this author);Soma Kato (author) (Search by this author);Kazuyuki Morishita (author) (Search by this author)Kentaro Wada (author) (Search by this author)National Institute for Materials Science
- Keyword
- Hydrogen embrittlement, 17-4 PH steel, Additive manufacturing, Slow strain-rate tensile testing, Retained austenite
- Date published
- 2024-05-14
- Updated at
- 2024-12-17 15:58:49 +0900
Fabrication of Sm-Co-Fe-Cu-Zr and SrFe12O19 based permanent magnets by PIM-technology and stereolithography methods
- Conference poster
- Collection
- The 28th International Workshop on Rare Earth and Future Permanent Magnets and Their Applications (REPM2025)
- Creator
-
;Bogdan Dmitrievich Chernyshev (author) (Search by this author)Giredmet JSC, RussiaIgor Viktorovich Shchetinin (author) (Search by this author)NUST MISIS, Russia
- Keyword
- REPM2025, Sm-Co, Strontium hexaferrite, PIM-technology, SLA, Additive manufacturing, Green body, Brown body, Sintered magnet
- Date published
- Updated at
- 2025-09-11 16:31:19 +0900
Creep Deformation of Ti Alloys Produced by LPBF
- Conference presentation
- Creator
-
;Y. Yamabe-Mitarai (author) (Search by this author)Department of Advanced Material Science, Graduate School of Frontier Sciences, The University of TokyoY. Toda (author) (Search by this author)Center for Basic Research on Materials/Data-driven Materials Research Field/Materials Modeling Group, National Institute for Materials Science
;
;T. Matsunaga (author) (Search by this author)JAXA;R. Ozasa (author) (Search by this author)Graduate School of Engineering, Osaka University;T. Ishimoto (author) (Search by this author)University of Toyama;T. Ito (author) (Search by this author)Toyama Prefectural UniversityT. Nakano (author) (Search by this author)Graduate School of Engineering, Osaka University
- Keyword
- Additive manufacturing, Crystallographic analysis, Heat-resistant titanium alloys, Microstructure, Precipitation, Volumetric energy density, Melting pool boundary
- Date published
- Updated at
- 2026-08-24 14:50:53 +0900
Anomalous grain growth as a pathway toward fully single-crystallization in IN738LC Ni-based superalloy fabricated by laser powder bed fusion
- Journal article
- Creator
-
;Masayuki Okugawa (author) (Search by this author);Kazufumi Nose (author) (Search by this author);Sei Hirooka (author) (Search by this author)Sukeharu Nomoto (author) (Search by this author)National Institute for Materials Science
;
;Yuheng Liu (author) (Search by this author)Makoto Watanabe (author) (Search by this author)National Institute for Materials Science
;
;Yuichiro Koizumi (author) (Search by this author)Takayoshi Nakano (author) (Search by this author)
- Keyword
- Additive manufacturing, Laser powder bed fusion, Ni-based superalloy, Single-crystal fabrication, μ-Helix scan
- Date published
- 2026-05-14
- Updated at
- 2026-07-14 10:31:33 +0900
Investigating synergistic effects of process-induced defects and α phase substructures on the mechanical response of additively manufactured Ti-6Al-4V alloy via an integrated numerical framework
- Journal article
- Creator
-
Hanqing Liu (author) (Search by this author)
https://orcid.org/0000-0003-4768-4326
(unauthenticated)
;
Fabien Briffod (author) (Search by this author)
;
Takayuki Shiraiwa (author) (Search by this author)
https://orcid.org/0000-0002-0999-0798
(unauthenticated)
- Keyword
- Ti-6Al-4V, Additive manufacturing, Defect, α-phase substructure, Crystal plasticity finite element method
- Date published
- 2026-06-05
- Updated at
- 2026-06-11 15:16:24 +0900
On the Enhanced Creep Performance in Ti6246 Achieved Through Laser Powder Bed Fusion (LPBF) Processing
- Journal article
- Creator
-
;Prince Valentine Cobbinah (author) (Search by this author);Sae Matsunaga (author) (Search by this author)Yoshiaki Toda (author) (Search by this author)
;
;Ryosuke Ozasa (author) (Search by this author);Takuya Ishimoto (author) (Search by this author);Takayoshi Nakano (author) (Search by this author);Tsutomu Ito (author) (Search by this author)Yoko Yamabe-Mitarai (author) (Search by this author)
- Keyword
- Additive manufacturing, Crystallographic analysis, Heat-resistant titanium alloys, Microstructure, Precipitation, Volumetric energy density
- Date published
- 2025-04-10
- Updated at
- 2025-06-04 17:16:18 +0900
Phase composition and magnetic properties of Nd(Pr)2Fe14B and (Sm,Zr)Fe11Ti magnets produced by selective laser melting
- Conference poster
- Collection
- The 28th International Workshop on Rare Earth and Future Permanent Magnets and Their Applications (REPM2025)
- Creator
-
;Sergey Andreev (author) (Search by this author)Ural Federal University, Russia;Viktoria Maltseva (author) (Search by this author)Ural Federal University, Russia;Dmitriy Neznakhin (author) (Search by this author)Ural Federal University, Russia;Arkadiy Shalaginov (author) (Search by this author)Ural Federal University, Russia;Andrey Urzhumtsev (author) (Search by this author)Ural Federal University, RussiaAlexey Volegov (author) (Search by this author)Ural Federal University, Russia
- Keyword
- REPM2025, Additive manufacturing, Selective laser melting, Permanent magnets, Phase composition, Microstructure
- Date published
- Updated at
- 2025-09-11 16:30:51 +0900
In-Depth investigation of the sub-micronic equiaxed grain microstructure of a NdFeB permanent magnet fabricated by Laser Powder Bed Fusion
- Conference presentation
- Collection
- The 28th International Workshop on Rare Earth and Future Permanent Magnets and Their Applications (REPM2025)
- Creator
-
;Aymeric Wolz (author) (Search by this author)CEA (French Alternative Energies and Atomic Energy Commission), France;Jean-Paul Garandet (author) (Search by this author)CEA (French Alternative Energies and Atomic Energy Commission), France;Camille Flament (author) (Search by this author)CEA (French Alternative Energies and Atomic Energy Commission), FranceOlivier Tosoni (author) (Search by this author)CEA (French Alternative Energies and Atomic Energy Commission), France
- Keyword
- REPM2025, Laser Powder Bed Fusion (LPBF), Additive manufacturing, NdFeB, Microstructure investigation, Columnar to equiaxed transition (CET)
- Date published
- Updated at
- 2025-09-11 16:31:28 +0900