Keyword: microstructure
Reset all filters

19 records found.

Reset all filters
Final Version Manuscript.pdf
Development of Tungsten Repair Technology by Atmospheric Plasma Spraying of Tungsten and Friction Stir Processing
Journal article
Creator
Phuangphaga Daram (author) (Search by this author)
Research Center for Structural Materials, National Institute for Materials Science
ORCID SAMURAI ;
Yoshiaki Morisada (author) (Search by this author)
Joining and Welding Research Institute, Osaka University
;
Takuya Ogura (author) (Search by this author)
Joining and Welding Research Institute, Osaka University
;
Masahiro Kusano (author) (Search by this author)
Research Center for Structural Materials, National Institute for Materials Science
ORCID SAMURAI ;
JuHyeon Yu (author) (Search by this author)
Rokkasho Institutes for Fusion Energy, National Institutes for Quantum Science and Technology
;
Makoto Fukuda (author) (Search by this author)
Naka Institutes for Fusion Science and Technology, National Institutes for Quantum Science and Technology
;
Hidetoshi Fujii (author) (Search by this author)
Joining and Welding Research Institute, Osaka University
;
Seiji Kuroda (author) (Search by this author)
Research Center for Structural Materials, National Institute for Materials Science
;
Makoto Watanabe (author) (Search by this author)
Research Center for Structural Materials, National Institute for Materials Science
ORCID SAMURAI
Keyword
atmospheric plasma spray process, divertor, friction stir processing, microstructure, nuclear fusion reactor, tungsten
Date published
2024-08-05
Updated at
2024-09-13 12:30:26 +0900
materials-18-01890-v2.pdf
Investigation of the Process Optimization for L-PBF Hastelloy X Alloy on Microstructure and Mechanical Properties
Journal article
Creator
Phuangphaga Daram (author) (Search by this author)
National Institute for Materials Science
ORCID SAMURAI ;
Masahiro Kusano (author) (Search by this author)
National Institute for Materials Science
ORCID SAMURAI ;
Makoto Watanabe (author) (Search by this author)
National Institute for Materials Science
ORCID SAMURAI
Keyword
laser powder bed fusion process, Hastelloy X alloy, microstructure, mechanical properties, FEM analysis
Date published
2025-04-21
Updated at
2025-04-23 12:30:07 +0900
2025_Microstructures_(Neutron_Gong).pdf
Effect of ausforming on isothermal transformation below the martensite start temperature in NiCrMoV steel: an in-situ neutron diffraction study
Journal article
Creator
Wu Gong (author) (Search by this author)
;
Stefanus Harjo (author) (Search by this author)
;
Takuro Kawasaki (author) (Search by this author)
;
Takayuki Yamashita (author) (Search by this author)
;
Akinobu Shibata (author) (Search by this author)
National Institute for Materials Science
ORCID SAMURAI ;
Tomoya Shinozaki (author) (Search by this author)
;
Yo Tomota (author) (Search by this author)
National Institute for Materials Science
ORCID ;
Nobuhiro Tsuji (author) (Search by this author)
Keyword
Ausforming, bainitic transformation, martensitic transformation, in-situ neutron diffraction, microstructure, mechanical properties
Date published
2025-08-04
Updated at
2025-12-09 08:30:10 +0900
adfm.202403161_Manuscript.docx
PbSe quantum dot superlattice thin films for thermoelectric applications
Journal article
Creator
Viviana Sousa (author) (Search by this author)
University of Minho
;
Masahiro Goto (author) (Search by this author)
Research Center for Materials Nanoarchitectonics (MANA)/Nanomaterials Field/Thermal Energy Materials Group, National Institute for Materials Science
ORCID SAMURAI ;
Marcel S. Claro (author) (Search by this author)
Universidade de Santiago de Compostela
;
Sergey Pyrlin (author) (Search by this author)
University of Minho
;
Luis Marques (author) (Search by this author)
University of Minho
;
Evgeny B. Modin (author) (Search by this author)
CIC nanoGUNE
;
Oleg I. Lebedev (author) (Search by this author)
Laboratoire de Cristallographie et Sciences des Matériaux (CRISMAT), Normandie Université
;
Siavash M. Alizadeh (author) (Search by this author)
International Iberian Nanotechnology Laboratory
;
Cátia Freitas (author) (Search by this author)
International Iberian Nanotechnology Laboratory
;
Eliana M. F. Vieira (author) (Search by this author)
University of Minho
;
Kirill Kovnir (author) (Search by this author)
Iowa State University
;
Pedro Alpuim (author) (Search by this author)
University of Minho
;
Takao Mori (author) (Search by this author)
Research Center for Materials Nanoarchitectonics (MANA), National Institute for Materials Science
ORCID SAMURAI ;
Yury V. Kolen’ko (author) (Search by this author)
International Iberian Nanotechnology Laboratory
Keyword
microstructure, molten salt, Seebeck coefficient, thermal conductivity, PbSe, transport properties, self-assembling
Date published
2024-07-12
Updated at
2025-07-12 08:30:20 +0900
MgCusb as a suitable electrode for contacting pre-compacted pellets of MgAgSb thermoelectric material.pdf
MgCusb as a suitable electrode for contacting pre-compacted pellets of MgAgSb thermoelectric material
Journal article
Creator
Amandine Helt (author) (Search by this author)
Cologne, Germany;b European Astronaut Centre, European Space Agency (ESA), Cologne,, a Institute of Materials Research, German Aerospace Center (DLR)
;
Amandine Duparchy (author) (Search by this author)
;
Aidan Cowley (author) (Search by this author)
;
Eckhard Müller (author) (Search by this author)
;
Johannes de Boor (author) (Search by this author)
Keyword
MgAgSb, thermoelectricity, devices, contacting, MgCuSb, electrode, interface, contact resistances, microstructure
Date published
2025-12-31
Updated at
2025-07-16 16:14:53 +0900
ISAMMA-2024_Sepehri-Amin.docx
Design and development of permanent magnets; how to solve rare-earth criticality while considering new demands?
Conference presentation
Creator
SEPEHRI AMIN Hossein (author) (Search by this author)
Research Center for Magnetic and Spintronic Materials/Green Magnetic Materials Group, National Institute for Materials Science
ORCID SAMURAI
Keyword
Permanent Magnets, coercivity mechanism, grain boundary, microstructure
Date published
Updated at
2025-01-09 16:30:52 +0900
oe-33-8-16976.pdf
Enhanced optical properties of translucent YVO4 ceramic fabricated by spark-plasma-sintering (SPS) via texture-controlled microstructure
Journal article
Creator
ORCID SAMURAI ; ORCID SAMURAI ; ORCID SAMURAI ; ORCID SAMURAI ; ORCID SAMURAI
Keyword
colloidal processing, magnetic field, microstructure
Date published
2025-04-21
Updated at
2025-06-11 16:30:29 +0900
65_MT-Z2024002.pdf
Effect of Strain Rate on the Extremely Low-Cycle Fatigue of Fe-15Mn-10Cr-8Ni-4Si Bidirectional-TRIP Steel
Journal article
Creator
ORCID SAMURAI ; ORCID SAMURAI ; ORCID SAMURAI
Keyword
fatigue, fracture surface, extremely low cycle fatigue, microstructure, martensitic transformation, seismic damper
Date published
2024-07-01
Updated at
2024-08-03 08:30:22 +0900
IEEE Magnetic Frontiers.docx
High Performance Permanent Magnets; How to solve element criticality while considering new demands?
Conference presentation
Creator
SEPEHRI AMIN Hossein (author) (Search by this author)
Research Center for Magnetic and Spintronic Materials/Green Magnetic Materials Group, National Institute for Materials Science
ORCID SAMURAI
Keyword
Permanent magnet, microstructure, coercivity
Date published
Updated at
2025-01-08 16:31:10 +0900
_ISIJINT-2023-437.pdf
Effects of the Cr and Ni concentrations on the fatigue and corrosion resistances of Fe−Mn−Cr−Ni−Si alloys for seismic damping applications
Journal article
Creator
Fumiyoshi Yoshinaka (author) (Search by this author)
Research Center for Structural Materials/Materials Manufacturing Field/Fatigue Resistant Alloy Design Group, National Institute for Materials Science
ORCID SAMURAI ;
Yusuke Tsutsumi (author) (Search by this author)
Research Center for Structural Materials/Materials Evaluation Field/Corrosion Research Group, National Institute for Materials Science
ORCID SAMURAI ;
Tomoya Nagira (author) (Search by this author)
Research Center for Structural Materials/Materials Evaluation Field/Welding and Joining Technology Group, National Institute for Materials Science
ORCID SAMURAI ;
Susumu Takamori (author) (Search by this author)
Research Center for Structural Materials/Materials Manufacturing Field/Fatigue Resistant Alloy Design Group, National Institute for Materials Science
ORCID SAMURAI ;
Satoshi Emura (author) (Search by this author)
Research Center for Structural Materials/Materials Manufacturing Field/Thermomechanical Processing Group, National Institute for Materials Science
ORCID SAMURAI ;
Takahiro Sawaguchi (author) (Search by this author)
Research Center for Structural Materials/Materials Manufacturing Field/Fatigue Resistant Alloy Design Group, National Institute for Materials Science
ORCID SAMURAI ;
Hideki Katayama (author) (Search by this author)
Research Center for Structural Materials, National Institute for Materials Science
ORCID SAMURAI ;
Terumi Nakamura (author) (Search by this author)
Research Network and Facility Services Division/Materials Manufacturing and Engineering Station/Forging Simulator Group, National Institute for Materials Science
;
Yasuhiko Inoue (author) (Search by this author)
Takenaka Corporation
;
Susumu Motomura (author) (Search by this author)
Takenaka Corporation
;
Atsumichi Kushibe (author) (Search by this author)
Takenaka Corporation
Keyword
fatigue, steel, microstructure, martensitic transformation, corrosion resistance
Date published
2024-05-15
Updated at
2024-04-18 16:30:22 +0900
Filter