6 records found.
Design and Characteristics of Photonic Crystal Resonators for Surface-Emitting Quantum Cascade Lasers
- Journal article
- Creator
-
Kazuaki Sakoda (author) (Search by this author)National Institute for Materials Science
;
Yuanzhao Yao (author) (Search by this author)
https://orcid.org/0000-0003-2504-2795
(unauthenticated)
;
Naoki Ikeda (author) (Search by this author)National Institute for Materials Science
;
;Yoshimasa Sugimoto (author) (Search by this author)Takaaki Mano (author) (Search by this author)National Institute for Materials Science
;
Takashi Kuroda (author) (Search by this author)National Institute for Materials Science
;
;Hirotaka Tanimura (author) (Search by this author)Shigeyuki Takagi (author) (Search by this author)
https://orcid.org/0009-0009-6444-8748
(unauthenticated)
;
;Rei Hashimoto (author) (Search by this author);Kei Kaneko (author) (Search by this author);Tsutomu Kakuno (author) (Search by this author);Shinji Ohkuma (author) (Search by this author);Ryuichi Togawa (author) (Search by this author);Tetsuya Miyagawa (author) (Search by this author);Hiroshi Ohno (author) (Search by this author)Shinji Saito (author) (Search by this author) - Keyword
- quantum cascade laser, photonic crystal resonator, quality factor, extraction efficiency, finite element method, k.p perturbation
- Date published
- 2024-10-30
- Updated at
- 2024-12-26 16:30:47 +0900
フェライト–パーライト複合組織鋼における降伏点現象のマルチスケール有限要素解析
- Journal article
- Creator
-
柳川 真之裕 (author) (Search by this author)National Institute for Materials Science
;
渡邊 育夢 (author) (Search by this author)National Institute for Materials Science
- Keyword
- yield-point phenomenon, heterogeneous microstructure, multiscale modeling, ferrite–pearlite duplex steels, finite element method
- Date published
- 2024-02-15
- Updated at
- 2024-08-22 12:30:15 +0900
Multiscale analysis of mechanical behavior of multilayer steel structures fabricated by wire and arc additive manufacturing
- Journal article
- Creator
-
Ikumu Watanabe (author) (Search by this author)National Institute for Materials Science
;
;Zhengzhong Sun (author) (Search by this author)Houichi Kitano (author) (Search by this author)National Institute for Materials Science
;
Kenta Goto (author) (Search by this author)
https://orcid.org/0000-0002-0102-0658
(unauthenticated)
National Institute for Materials Science
- Keyword
- Wire and arc additive manufacturing, stainless steel, finite element method, instrumented indentation, multiscale characterization
- Date published
- 2020-01-31
- Updated at
- 2024-01-05 22:13:59 +0900
Data-driven estimation of plastic properties of alloys using neighboring indentation test
- Journal article
- Creator
-
;Ta-Te Chen (author) (Search by this author)National Institute for Materials ScienceIkumu Watanabe (author) (Search by this author)National Institute for Materials Science
;
Dayuan Liu (author) (Search by this author)National Institute for Materials Science
;
Kenta Goto (author) (Search by this author)
https://orcid.org/0000-0002-0102-0658
(unauthenticated)
National Institute for Materials Science
- Keyword
- Elastic-plastic material, finite element method, mechanical testing, response surface, instrumented indentation test, material database
- Date published
- 2021-01-01
- Updated at
- 2024-01-05 22:13:33 +0900
Numerical calculation and finite element analysis for anisotropic elastic properties of carbon fibers: Dependence of integration subinterval and mesh size on indentation-derived elastic modulus
- Journal article
- Creator
-
Kenta Goto (author) (Search by this author)
https://orcid.org/0000-0002-0102-0658
(unauthenticated)
National Institute for Materials Science
;
Kimiyoshi Naito (author) (Search by this author)National Institute for Materials Science
;
;Keiichi Shirasu (author) (Search by this author)National Institute for Materials ScienceIkumu Watanabe (author) (Search by this author)National Institute for Materials Science
- Keyword
- indentation, anisotropic elasticity, Vlassak–Nix model, finite element method, numerical integration
- Date published
- 2022-10-04
- Updated at
- 2024-01-05 22:12:00 +0900
Data-driven estimation of plastic properties in work-hardening model combining power-law and linear hardening using instrumented indentation test
- Journal article
- Creator
-
;Ta-Te Chen (author) (Search by this author)National Institute for Materials ScienceIkumu Watanabe (author) (Search by this author)National Institute for Materials Science
- Keyword
- Elastic-plastic material, instrumented indentation test, response surface, material database, finite element method
- Date published
- 2022-12-31
- Updated at
- 2024-01-05 22:13:44 +0900