# Profilometry‐Based Indentation Plastometry at High Temperature

https://mdr.nims.go.jp/datasets/f67c41fe-e4a4-49fd-b88f-72e1ed18612a

## File

- [Adv Eng Mater - 2024 - Tammpere - Profilometry‐Based Indentation Plastometry at High Temperature.pdf](https://mdr.nims.go.jp/filesets/6f589923-3640-4550-8e44-119a87158eff/download) ([Detail](https://mdr.nims.go.jp/filesets/6f589923-3640-4550-8e44-119a87158eff.md))

## Id

f67c41fe-e4a4-49fd-b88f-72e1ed18612a

## Local identifier



## Visibility

open_to_public

## State

published

## Created at

2024-09-24T05:19:30.510223Z

## Updated at

2024-09-25T07:30:38.679143Z

## Published at

2024-09-25T07:30:38.797865Z

## Doi



## First published url

https://doi.org/10.1002/adem.202301073

## Date published

2024-08-28

## Recorded date published

2024-11

## Resource type

journal_article

## Manuscript type

vor

## Collection



## Title

- title: Profilometry‐Based Indentation Plastometry at High Temperature
  title_type: original
  lang: en

## Description

- description: This is a first report on profilometry-based indentation plastometry
    (PIP) at high temperature (HT), covering both thermal characterization and issues
    for obtaining stress–strain curves. The heating system has a relatively low thermal
    inertia, reaching 800 °C within about 10 min, while both indentation (≈20 s) and
    cooling (≈20 min) are also quick. This capability is useful in terms of limiting
    exposure of the sample to prolonged periods at HT, and hence avoiding the formation
    of thick oxide layers (which can affect indent profiles and hence inferred stress–strain
    curves). There is good general consistency between stress–strain curves obtained
    via HT-PIP and those from tensile testing. However, the possibility of creep (time-dependent
    deformation) affecting the outcomes (of both types of test), particularly at higher
    temperatures, should be borne in mind. Creep has a characteristic effect on tensile
    curves, which can often be confirmed and investigated by changing the imposed
    strain rate. It can also be revealed by carrying out the HT-PIP testing with different
    penetration velocities or by monitoring the shape of the load–displacement plot.
  description_type: abstract
  lang: und

## Creator

- name: Hannes Tammpere
  role: author
- name: Phil McKeown
  role: author
  orcid: https://orcid.org/0009-0000-2289-1316
- name: James Miller
  role: author
  orcid: https://orcid.org/0000-0001-7063-3215
- name: Chizhou Fang
  role: author
  orcid: https://orcid.org/0000-0003-2601-2993
- name: Emily Curtis
  role: author
- name: Marcus Gaiser‐Porter
  role: author
  orcid: https://orcid.org/0009-0003-5809-3748
- name: Max Burley
  role: author
  orcid: https://orcid.org/0000-0002-8102-4105
- name: James Campbell
  role: author
  orcid: https://orcid.org/0000-0001-9158-1418
- name: Maria Artiles
  role: author
  orcid: https://orcid.org/0000-0003-4681-5806
- name: Yuanbo Tang
  role: author
  orcid: https://orcid.org/0000-0002-9667-7846
- name: Satesh Utada
  role: author
  orcid: https://orcid.org/0000-0001-6783-9968
- name: Roger Reed
  role: author
- name: Trevor Clyne
  role: author
  orcid: https://orcid.org/0000-0003-2163-1840

## Contact agent



## Publisher

organization: Wiley

## Managing organization



## Keyword

- subject: Indentation plastometry
  schema: not_defined
- subject: Stress-strain curve
  schema: not_defined
- subject: Tensile testing
  schema: not_defined
- subject: Creep
  schema: not_defined
- subject: High temperature
  schema: not_defined

## Rights

- identifier: https://creativecommons.org/licenses/by/4.0/

## Other identifier(s)



## Data origin



## Embargo



## Journal

- title: Advanced Engineering Materials
  issn: '14381656'

## Conference



## Related item



## Funding

- identifier: EP/I038691/1
  funder_name: Engineering and Physical Sciences Research Council
- identifier: IN‐2016‐004
  funder_name: Leverhulme Trust
- identifier: EM/2019‐038/4
  funder_name: Leverhulme Trust
- identifier: '10006185'
  funder_name: Innovate UK
- identifier: MR/W01338X/1
  funder_name: Innovate UK

## Instrument



## Instrument operator



## Instrument managing organization



## Measurement method



## Specimen



## Chemical composition



## Structure for specimen



## Structural feature for specimen



## Specific property for specimen



## Process for specimen treatment



## Computational method



## Energy level/transition state



## Software



## Custom property



## Fileset

- id: 6f589923-3640-4550-8e44-119a87158eff
  filename: Adv Eng Mater - 2024 - Tammpere - Profilometry‐Based Indentation Plastometry
    at High Temperature.pdf
  content_type: application/pdf
  size: 3766169
  md5: dc1d4d519bdd9c9c2248c93abefbf553

## Thumbnail

fileset_id: 6f589923-3640-4550-8e44-119a87158eff
filename: Adv Eng Mater - 2024 - Tammpere - Profilometry‐Based Indentation Plastometry
  at High Temperature.pdf