論文 Large perpendicular magnetic anisotropy at Fe/rock-salt-type Cr-oxide interface synthesized via oxygen-driven chemical layer exchange process

Yuki Iida ; Qingyi Xiang ORCID ; Thomas Scheike SAMURAI ORCID ; Zhenchao Wen SAMURAI ORCID ; Jun Okabayashi ORCID ; Jun Uzuhashi SAMURAI ORCID ; Tadakatsu Ohkubo SAMURAI ORCID ; Kazuhiro Hono SAMURAI ORCID ; Hiroaki Sukegawa SAMURAI ORCID ; Seiji Mitani SAMURAI ORCID

コレクション

引用
Yuki Iida, Qingyi Xiang, Thomas Scheike, Zhenchao Wen, Jun Okabayashi, Jun Uzuhashi, Tadakatsu Ohkubo, Kazuhiro Hono, Hiroaki Sukegawa, Seiji Mitani. Large perpendicular magnetic anisotropy at Fe/rock-salt-type Cr-oxide interface synthesized via oxygen-driven chemical layer exchange process. APL Materials. 2024, 12 (11), . https://doi.org/10.1063/5.0233103
SAMURAI

説明:

(abstract)

Perpendicular magnetic anisotropy (PMA) induced at the interface of the metallic magnetic layer/oxide layer plays a major role in scaling of state-of-the-art spin-transfer-torque magnetoresistive random access memory. The realization of PMA requires the development of mature interface manipulation techniques, as well as materials constituting the interface. Herein, we report large PMA using stacks developed with an ultrathin (~0.7 nm) Fe/rock-salt CrO(001) interface via an oxygen-driven diffusion process. The stacks were prepared by sputter-deposition and post-annealing of the Cr buffer/ultrathin Fe/MgO structure. Significant oxidation of the Fe layer and Cr diffusion into the MgO layer occurred during the deposition. After post-annealing, the oxidized Fe layer was reduced to form an Fe/rock-salt-type Cr-monoxide structure due to chemical layer exchange. The lattice-matched Fe/CrO interface with a large interfacial PMA energy of 1.55 mJ/m2 was confirmed after annealing at 500degreeC. X-ray absorption spectroscopy measurements revealed that the post-annealing promoted the redox reaction from the Fe oxide to the metallic Fe and the formation of the CrO. The observed PMA indicates that the oxygen-driven diffusion process by annealing resulted in the well-controlled Fe/CrO interface. The demonstrated diffusion process provides a new chemical route to fabricate artificial, well-controlled PMA interfaces, even containing metastable materials, beyond the conventional sequential layer stacking for the development of spintronic devices.

権利情報:

キーワード: spintronics, perpendicular magnetic anisotropy, CrO, epitaxial growth

刊行年月日: 2024-11-01

出版者: AIP Publishing

掲載誌:

  • APL Materials (ISSN: 2166532X) vol. 12 issue. 11

研究助成金:

  • Japan Society for the Promotion of Science 16H06332
  • New Energy and Industrial Technology Development Organization JPNP16007
  • Japan Society for the Promotion of Science 22H04966
  • Japan Society for the Promotion of Science 23K26535
  • Japan Society for the Promotion of Science 24H00408
  • the Photon Factory Program Advisory Committee, KEK 2021G069

原稿種別: 出版者版 (Version of record)

MDR DOI:

公開URL: https://doi.org/10.1063/5.0233103

関連資料:

その他の識別子:

連絡先:

更新時刻: 2024-12-10 16:55:28 +0900

MDRでの公開時刻: 2024-12-10 16:55:28 +0900

ファイル名 サイズ
ファイル名 137-APL Mater. 12, 111116 (2024)-Iida.pdf (サムネイル)
application/pdf
サイズ 8.76MB 詳細