Article Direct measurement and verification of cohesive zone model parameters for basalt/PP rods using the transverse tensile test and virtual double cantilever beam test

Yuta Tobata ORCID (National Institute for Materials ScienceROR) ; Kimiyoshi Naito SAMURAI ORCID (National Institute for Materials ScienceROR) ; Jonathon Tanks SAMURAI ORCID (National Institute for Materials ScienceROR)

Direct Measurement and Verification_submission.pdf
Download file (2.98 MB)
Download as zip (2.95 MB)
Collection

Citation
Yuta Tobata, Kimiyoshi Naito, Jonathon Tanks. Direct measurement and verification of cohesive zone model parameters for basalt/PP rods using the transverse tensile test and virtual double cantilever beam test. POLYMER COMPOSITES. 2022, 44 (2), 954-962. https://doi.org/10.48505/nims.4270
SAMURAI

Description:

(abstract)

To further our understanding of failure in thermoplastic-based composite rods, the mode Ⅰ-governed cohesive zone model parameter of a basalt fiber reinforced polypropylene composite rod is evaluated. The relations between stress and strain, the maximum normal traction and final separation displacement are examined using a transverse tensile test method. The measured traction is verified by three-dimensional finite element analysis of rod-shaped double cantilever beam specimens. The numerical results show the close relation between the crack length and cube root of compliance, and yields a representative value of the mode I-governed critical fracture energy.

Rights:

  • In Copyright
    This is the pre-peer reviewed version of the following article:Direct measurement and verification of cohesive zone model parameters for basalt/PP rods using the transverse tensile test and virtual double cantilever beam test, which has been published in final form at https://doi.org/10.1002/pc.27145. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Use of Self-Archived Versions.

Keyword: Cohesion, Finite element analysis, Tension, Toughness

Date published: 2022-11-09

Publisher: Wiley

Journal:

  • POLYMER COMPOSITES (ISSN: 02728397) vol. 44 issue. 2 p. 954-962

Funding:

  • JST Center of Innovation (COI)

Manuscript type: Author's original (Submitted manuscript)

MDR DOI: https://doi.org/10.48505/nims.4270

First published URL: https://doi.org/10.1002/pc.27145

Related item:

Other identifier(s):

Contact agent:

Updated at: 2024-01-05 22:13:07 +0900

Published on MDR: 2023-12-01 13:30:30 +0900

Filename Size
Filename Direct Measurement and Verification_submission.pdf (Thumbnail)
application/pdf 		Size 2.98 MB Detail