論文 Preparation, Oxidation Resistance and Electrical Resistivity of Polycrystalline Single Phase RuB<sub>2</sub> Material by Arc-melt Method

Kunio YUBUTA ; Kaoru KOUZU ; Akiko NOMURA ; Shigeru OKADA ; Takeshi HAGIWARA ; Toru KAWAMATA ; Kazumasa SUGIYAMA ; Yasukazu MURAKAMI ; Toetsu SHISHIDO ; Akira YOSHIKAWA ; Takao MORI SAMURAI ORCID (National Institute for Materials Science)

コレクション

引用
Kunio YUBUTA, Kaoru KOUZU, Akiko NOMURA, Shigeru OKADA, Takeshi HAGIWARA, Toru KAWAMATA, Kazumasa SUGIYAMA, Yasukazu MURAKAMI, Toetsu SHISHIDO, Akira YOSHIKAWA, Takao MORI. Preparation, Oxidation Resistance and Electrical Resistivity of Polycrystalline Single Phase RuB<sub>2</sub> Material by Arc-melt Method. Journal of the Japan Society of Powder and Powder Metallurgy. 2025, 72 (1), 24-00037. https://doi.org/10.2497/jjspm.24-00037

説明:

(abstract)

A single-phase RuB2 (orthorhombic, space group Pmmn) polycrystalline material was successfully synthesized by the arc melting method. The condition for obtaining a single-phase RuB2 material is dependent on the composition and form of the raw materials, namely using the composition of atomic ratio Ru:B = 1:2.1 and using granules Ru and B as the raw materials. The lattice constants of a single-phase RuB2 obtained by the arc melt method are a = 4.645(1), b = 2.865(1), c = 4.046(1) Å, V = 53.8(1) Å3. A thermogravimetric-differential thermal analysis (TG-DTA) for RuB2 was carried out from room temperature to 1473 K. The oxidation reaction of RuB2 begins at about 570 K, and the weight gain rate of final oxidation is 29%. Interestingly, the RuB2 material was found to have a significantly lower oxidation resistance than Ru metal. The product after heating up to 1473 K in air atmosphere is a mixture of RuB1.1 (RuB) and Ru phases, and B2O3 which is probably produced in an amorphous state. The values for electrical resistivity of RuB2 are in the ranges from 23.3 × 10−3 to 102.2 × 10−3 Ω ‧ cm.

権利情報:

キーワード: borides

刊行年月日: 2025-01-15

出版者: Japan Society of Powder and Powder Metallurgy

掲載誌:

  • Journal of the Japan Society of Powder and Powder Metallurgy (ISSN: 05328799) vol. 72 issue. 1 p. 10-15 24-00037

研究助成金:

原稿種別: 出版者版 (Version of record)

MDR DOI:

公開URL: https://doi.org/10.2497/jjspm.24-00037

関連資料:

その他の識別子:

連絡先:

更新時刻: 2025-12-10 08:30:33 +0900

MDRでの公開時刻: 2025-12-10 08:23:51 +0900

ファイル名 サイズ
ファイル名 J. Jpn. Soc. Powder Powder Metallurgy, 72 (2025) 10-15.pdf (サムネイル)
application/pdf
サイズ 2.59MB 詳細