Download file (5.14 MB)
Download as zip (4.72 MB)

Collection

Citation

Description:

Many insects are able to walk vertically or upside down on both hard and soft surfaces. In beetles such as the ladybird (Coccinella septempunctata), intermolecular forces between tarsal setae on the footpads of the insects make this movement possible. In prior work, adhesion structures made from polydimethylsiloxane (PDMS) that mimic the action of the tarsal setae have been developed. It is proposed that these adhesion structures could be attached to a simplified version of the leg of a ladybird and used in practical applications. For example, the leg structures could potentially be employed in small surveillance drones to enable attachment to surfaces during flights, in order to preserve battery power. Alternatively, the structures could be used in small robotic devices to en-able walking on steeply inclined surfaces. In this program of work, the morphology and move-ment of the leg of a ladybird were closely studied using 3D X-ray microscope and high speed mi-croscope. The positions of the tendons that facilitated movement were identified. From this knowledge, a simplified leg structure using pin-joints was designed and then fabricated using 3-D printing. The PDMS adhesion structures were then attached to the leg structure. The tendons in the actual insect leg were replicated using thread. Typical detachment forces of about 4N indi-cated that the simplified leg structure was, in principle, more than capable of supporting the weight of a small device and then detach successfully. Attachment/detachment movement opera-tions were performed using a linear actuator and controlled remotely. Therefore, proof of concept has been demonstrated for the use of such a simplified ladybird leg structure for the attach-ment/detachment of small robotic devices to horizontal, inclined or vertical surfaces.

Rights:

• Creative Commons BY Attribution 4.0 International
  

Keyword: ladybird leg, bio-inspired

Date published: 2024-03-18

Publisher: MDPI AG

Journal:

• Biomimetics (ISSN: 23137673) p. 184-184

Funding:

• Innovative Science and Technology Initiative for Security JPJ004596

Manuscript type: Publisher's version (Version of record)

MDR DOI:

First published URL: https://doi.org/10.3390/biomimetics9030184

Related item:

Other identifier(s):

Contact agent:

Updated at: 2024-03-28 12:30:36 +0900

Published on MDR: 2024-03-28 12:30:36 +0900