Download file (1.25MB)
Download as zip (1.23MB)

コレクション

引用

説明:

High-Tc superconducting magnetic flux transformers with pickup coils of diameter 100 mm were prepared using an RE123 commercial superconductive tape. A superconducting flux transformer requires closed circuit containing a superconductive joint which is difficult to prepare for cuprate high-Tc superconductor. Using the cut-and-wind method, seamless and large bore coils were equipped to the flux transformer, which is advantageous for non-destructive estimation and geological magnetic survey. The magnetic flux transfer of the applied static field caused by the spontaneously induced superconductive shield current at liquid nitrogen temperature was confirmed, and the static field transfer efficiency depending on the inductance of the coils in the flux transformer was estimated.

権利情報:

• Creative Commons BY-NC-ND Attribution-NonCommercial-NoDerivs 4.0 International
  

  This is the Accepted Manuscript version of an article accepted for publication in Japanese Journal of Applied Physics. IOP Publishing Ltd is not responsible for any errors or omissions in this version of the manuscript or any version derived from it. The Version of Record is available online at https://dx.doi.org/10.35848/1347-4065/ac0406.

キーワード: Large bore coil, REBCO High Tc superconductor, Superconducting flux transformer working at 77K, Static magnetic field transfer, Superconducting closed circuit, REBCO Superconducting tape

刊行年月日: 2021-07-01

出版者: IOP Publishing

掲載誌:

• Japanese Journal of Applied Physics (ISSN: 13474065) vol. 60 issue. 7

研究助成金:

• JSPS KAKENHI Grant Number JP18K04185

原稿種別: 著者最終稿 (Accepted manuscript)

MDR DOI: https://doi.org/10.48505/nims.5115

公開URL: https://doi.org/10.35848/1347-4065/ac0406

関連資料:

その他の識別子:

連絡先:

更新時刻: 2024-12-09 16:30:28 +0900

MDRでの公開時刻: 2024-12-09 16:30:29 +0900