論文 Structural characterization of hierarchical polymer foams by combining X-ray micro-computed tomography and scanning electron microscopy

Takumi Ono ; Sadaki Samitsu SAMURAI ORCID (National Institute for Materials Science) ; Misa Hazutani ; Seisuke Ata

コレクション

引用
Takumi Ono, Sadaki Samitsu, Misa Hazutani, Seisuke Ata. Structural characterization of hierarchical polymer foams by combining X-ray micro-computed tomography and scanning electron microscopy. Polymer Testing. 2024, 140 (), 108580. https://doi.org/10.1016/j.polymertesting.2024.108580

説明:

(abstract)

Complementary structural characterization methods are useful for studying the hierarchical cellular morphology of polymer foams. In this study, we employed scanning electron microscopy (SEM) and X-ray micro-computed tomography (micro-CT) to characterize the hierarchical cellular morphology of poly(methyl methacrylate) (PMMA) and polystyrene (PS) foams. The polymer foams were prepared using pure CO2 gas and CO2–chlorodifluoromethane (HCFC-22) gas mixtures as blowing agents. Depending on the type of polymer and HCFC-22 concentration, hierarchical cellular structures consisting of nanocells, microcells, and macrocells were obtained. The size distribution of the nanocells was determined by high-magnification SEM, while the size, shape, and spatial distribution of the microcells and macrocells in three dimensions were determined by micro-CT. Moreover, a well-designed micro-CT experiment enabled a brightness comparison between the foams and relative local density mapping of the foams based on the brightness. The results clearly showed the formation of a dense skin layer at the air interface of both PMMA and PS foams and dense matrix around the large macrocells in the PMMA foams. Thus, combining SEM and micro-CT provides a deeper understanding of the formation mechanism of the hierarchical cellular structure of polymer foams.

権利情報:

キーワード: X-ray micro-computed tomography, Scanning electron microscopy, Three dimensional imaging, Hierarchical cellular structure, Mixed blowing agent, Poly(methyl methacrylate), Polymer foaming

刊行年月日: 2024-09-16

出版者: Elsevier BV

掲載誌:

  • Polymer Testing (ISSN: 01429418) vol. 140 108580

研究助成金:

  • Tsukuba Innovation Arena (The project was financially supported by Tsukuba Innovation Arena (Director: Takumi Ono, who is one of the co-authors of this manuscript).)

原稿種別: 出版者版 (Version of record)

MDR DOI:

公開URL: https://doi.org/10.1016/j.polymertesting.2024.108580

関連資料:

その他の識別子:

連絡先:

更新時刻: 2025-04-03 12:30:07 +0900

MDRでの公開時刻: 2025-04-03 12:47:40 +0900