プレゼンテーション Tailoring AgBiI₄ Lead-Free Solar Cells Using Alkali Halide Additive
FATIMA Shanas (author) (この著者で検索)
National Institute for Materials Science Research Center for Energy and Environmental Materials (GREEN)/Battery and Cell Materials Field/Photovoltaic Materials Group
;
KHADKA Dhruba Bahadur (author) (この著者で検索)
ORCID https://orcid.org/0000-0001-9134-3890
National Institute for Materials Science Research Center for Energy and Environmental Materials (GREEN)/Battery and Cell Materials Field/Photovoltaic Materials Group
SAMURAI NIMS Researchers Directory SAMURAI
ORCID SAMURAI ;
YANAGIDA Masatoshi (author) (この著者で検索)
ORCID https://orcid.org/0000-0002-8065-7875
National Institute for Materials Science Research Center for Energy and Environmental Materials (GREEN)/Battery and Cell Materials Field/Photovoltaic Materials Group
SAMURAI NIMS Researchers Directory SAMURAI
ORCID SAMURAI ;
Sunil Kumar Singh (author) (この著者で検索)
IIT BHU, Varanasi, India
;
SHIRAI Yasuhiro (author) (この著者で検索)
ORCID https://orcid.org/0000-0003-2164-5468
National Institute for Materials Science Research Center for Energy and Environmental Materials (GREEN)/Battery and Cell Materials Field/Photovoltaic Materials Group
SAMURAI NIMS Researchers Directory SAMURAI
ORCID SAMURAI
コレクション

引用
FATIMA Shanas, KHADKA Dhruba Bahadur, YANAGIDA Masatoshi, Sunil Kumar Singh, SHIRAI Yasuhiro. Tailoring AgBiI₄ Lead-Free Solar Cells Using Alkali Halide Additive. https://doi.org/10.48505/nims.8720

代替タイトル: アルカリハライド添加剤を用いたAgBiI₄鉛フリー太陽電池のカスタマイズ

説明:

(abstract)

In this work, we have investigated the effect of alkali halide additive on AgBiI4 with a bandgap of approximately 1.82 eV as a Pb-free light-absorbing material. The NaI additive regulates the crystallisation of AgBiI4 crystals and helps in the formation of a highly compact and pinhole-free surface, leading to significantly improved AgBiI4 film quality. The fabricated solar cell with ITO/SnO2/AgBiI4 NaI/poly[bis(4-phenyl) (2,4,6-trimethylphenyl) amine] (PTAA)/Ag configuration achieved a PCE of 3.72% with the introduction of the Na+ additive. The film with NaI additive also modulated the surface chemistry of the AgBiI4 film by quenching the metallic content of Bi0 ions, which otherwise is detrimental to the device's performance. The chart (Fig.1) shows that we have achieved one of the best PCEs for rudorffite-based solar cells3. Furthermore, non-radiative relaxations are also suppressed after the introduction of NaI, which is evidenced by increased PL intensity and PL lifetime of NaI-based films. The stability of the unencapsulated NaI additive-based device is also better than the control device.

権利情報:

キーワード: Bismuth halide, Solar cells

会議: 86th JSAP AUTUMN Meeting (第86回応用物理学会秋季学術講演会) (2025-09-07 - 2025-09-10)

研究助成金:

原稿種別: 論文以外のデータ

MDR DOI: https://doi.org/10.48505/nims.8720

公開URL:

関連資料:

その他の識別子:

連絡先:

更新時刻: 2026-11-11 11:45:18 +0900

MDRでの公開時刻: 2026-11-11 12:28:26 +0900

ファイル名 サイズ
ファイル名 JSAP-Autumn-FS-NIMS-2025.pdf (サムネイル)
application/pdf
サイズ 5.24MB 詳細