Download file (6.49MB)
Download as zip (6.21MB)

コレクション

引用

説明:

The TNM alloy, a βo-phase-containing TiAl alloy, has been withdrawn from use as a last-stage turbine blade in commercial jet engines as it suffered frequent impact fractures in service, raising doubts regarding the necessity of the βo-phase in practical TiAl alloys. Here, we evaluate the prac-tical properties required for jet engine blades for various TiAl alloys, and investigate the effects of the βo-phase thereupon. First, we explore the influence of the βo-phase content on the impact re-sistance and machinability for forged Ti–43.5Al–xCr and cast Ti–46.0Al–xCr alloys; the properties deteriorate significantly at increasing βo-phase contents. Subsequently, two practical TiAl al-loys—TNM alloy and TiAl4822—were prepared with and without the βo-phase by varying the heat treatment temperature for the former and the Cr concentration for the latter. In addition to impact resistance and machinability the creep strength is significantly reduced by the presence of the βo-phase. Overall, these findings suggest that the βo-phase is an undesirable phase in practical TiAl alloys, especially those used for jet engine blades, because, although the disordered β-phase is soft at high temperatures, it changes to significantly more brittle and harder βo-phase after cooling.

権利情報:

• Creative Commons BY Attribution 4.0 International
  

キーワード: titanium aluminides, impact resistance, machinability, creep strength, jet engine blades

刊行年月日: 2024-08-09

出版者: MDPI AG

掲載誌:

• Metals (ISSN: 20754701) vol. 14 issue. 8 908

研究助成金:

• Japan Science and Technology Agency AS0216001

原稿種別: 出版者版 (Version of record)

MDR DOI:

公開URL: https://doi.org/10.3390/met14080908

関連資料:

その他の識別子:

連絡先:

更新時刻: 2024-08-30 16:30:54 +0900

MDRでの公開時刻: 2024-08-30 16:30:54 +0900