論文 Reactive consolidation of tough, deformation resistant tantalum monoboride

D. Demirskyi (National Institute for Materials Science) ; K. Yoshimi ; T.S. Suzuki SAMURAI ORCID (National Institute for Materials Science) ; O. Vasylkiv SAMURAI ORCID (National Institute for Materials Science)

コレクション

引用
D. Demirskyi, K. Yoshimi, T.S. Suzuki, O. Vasylkiv. Reactive consolidation of tough, deformation resistant tantalum monoboride. Scripta Materialia. 2023, 229 (), 115383. https://doi.org/10.1016/j.scriptamat.2023.115383
SAMURAI

説明:

(abstract)

Reactive consolidation of tantalum monoboride (TaB) was performed by spark plasma sintering at 2150 °C. The TaB ceramic had elongated grains with a length/width ratio between 2.4 and 4.8 and a length between 30 and 100 μm. Up to 3 vol.% of residual non-reacted boron was also present. The hardness, indentation fracture toughness and room-temperature strength of the TaB were 18.5 ± 0.2 GPa, 9.8 ± 0.4 MPa m1/2, and 320 MPa, respectively. The TaB showed resistance to high-temperature deformation as its flexural strength gradually increased from 370 MPa at 1000 °C to 425±7 MPa at 1800 °C.

権利情報:

キーワード: Tantalum Monoboride, High Temperature Strength, Reactive SPS, Tough Ceramic, Deformation Resistant Ceramic

刊行年月日: 2023-02-28

出版者: Elsevier BV

掲載誌:

  • Scripta Materialia (ISSN: 13596462) vol. 229 115383

研究助成金:

  • NIMS PA3030 (粉体・セラミックス 結晶・界面の階層的構造制御による機能顕在化のための研究 20)
  • NIMS PA5180 (セラミックスプロセッシング - 30)
  • NIMS AB3080 (多結晶光学材料 Research toward Innovative Optical Materials 50 )

原稿種別: 著者最終稿 (Accepted manuscript)

MDR DOI: https://doi.org/10.48505/nims.4959

公開URL: https://doi.org/10.1016/j.scriptamat.2023.115383

関連資料:

その他の識別子:

連絡先:

更新時刻: 2025-02-28 12:30:36 +0900

MDRでの公開時刻: 2025-02-28 12:30:36 +0900

ファイル名 サイズ
ファイル名 SMM-23-0076_R1.pdf (サムネイル)
application/pdf
サイズ 1.62MB 詳細