Md. Emrul Kayesh
;
Yulu He
;
Md. Abdul Karim
;
Siliang Cao
;
Shamim Ahmmed
;
Yasuhiro Shirai
;
Ashraful Islam
説明:
(abstract)Currently, tin (Sn) is the most efficient alternative to lead (Pb) for perovskite solar cells (PSCs). However, the fabrication of pinhole-free uniform and highly crystalline Sn-perovskite typically, FASnI3 films remains a crucial factor due to their rapid crystallization. To address this issue, we incorporated 2-pyridylthiourea (2PTU) into the precursor solution during FASnI3 film fabrication. Based on the morphology, structure, and elements analysis, we have observed that 2PTU impacts the growth of perovskite crystals and surface morphology by coordinating with SnI6 4– octahedral. Moreover, the 2PTU-added FASnI3 film contained fewer defects and a prolonged carrier lifetime. These substantial improvements in the FASnI3 film resulted in an enhanced open-circuit voltage, elevating the power conversion efficiency of Sn-PSC from 10.23% (pristine) to 12.85% (2PTU). Significantly, after 500 h of continuous illumination at maximum power point tracking under one sun, the 2PTU-added FASnI3-based PSCs showed remarkable stability and maintained above 90% of their initial PCE.
権利情報:
キーワード: Sn-based Perovskite Solar Cells, 2-Pyridylthiourea , Defect Passivation
刊行年月日: 2025-02-24
出版者: American Chemical Society (ACS)
掲載誌:
研究助成金:
原稿種別: 査読前原稿 (Author's original)
MDR DOI: https://doi.org/10.48505/nims.5949
公開URL: https://doi.org/10.1021/acsaem.4c02534
関連資料:
その他の識別子:
連絡先:
更新時刻: 2025-12-03 08:30:03 +0900
MDRでの公開時刻: 2025-12-03 08:22:50 +0900
| ファイル名 | サイズ | |||
|---|---|---|---|---|
| ファイル名 |
Optimization of Crystal Growth and Defect Passivation of FASnI3 Film by Using 2-Pyridylthiourea for Sn-based Perovskite Solar Cells.docx
(サムネイル)
application/vnd.openxmlformats-officedocument.wordprocessingml.document |
サイズ | 14.3MB | 詳細 |