説明:
(abstract)Fe-assisted graphitization offers a route to convert renewable biomass into graphite, but high crystallinity and fast electrochemical kinetics are difficult to achieve simultaneously at reduced temperature. Here, we show that a short hydrothermal carbonization step can function as precursor architecture engineering rather than simple wet pretreatment. Fe(NO3)3-impregnated Japanese cedarwood was hydrothermally treated for only 15 min at 250 °C to generate an iron–carbon hydrochar precursor in which mixed iron oxide domains, including Fe3O4, are embedded within a reactive carbon matrix. During annealing at 1000 °C, these reducible iron oxide domains are converted into Fe/Fe3C catalytic interfaces that promote graphitic layer growth. After acid washing and mild air oxidation, the product exhibits graphite-like stacking with d002 z 0.3369 nm, low Raman disorder (ID/IG = 0.14), and a Raman-derived in-plane domain size of ca. 135 nm. HRTEM and SAED further revealed extended graphitic fringes and local single-crystal-like graphite domains within a polycrystalline sheet network. As a lithium-ion battery anode, the material, used without a post-synthetic surface coating, delivers 341/317 mAh g−1 lithiation/delithiation capacities at 1C and exhibits reproducible lithiation behavior within each rate step up to 10C. These results identify hydrothermally preorganized iron–carbon precursors as an effective design principle for low-temperature biomass graphitization and high-rate lithium-ion storage.
権利情報:
キーワード: lithium-ion battery, graphite, biomass material, hydrothermal process
刊行年月日: 2026-09-15
出版者: Royal Society of Chemistry (RSC)
掲載誌:
研究助成金:
原稿種別: 出版者版 (Version of record)
MDR DOI:
公開URL: https://doi.org/10.1039/d6se00774k
関連資料:
その他の識別子:
連絡先:
更新時刻: 2026-11-20 10:35:53 +0900
MDRでの公開時刻: 2026-11-20 12:34:38 +0900
| ファイル名 | サイズ | |||
|---|---|---|---|---|
| ファイル名 |
SusEneFuel(2026).pdf
(サムネイル)
application/pdf |
サイズ | 1.37MB | 詳細 |