Download file (1.22MB)
Download as zip (1.2MB)

コレクション

引用

説明:

This review focuses on our results on the fabrication of large-area patterning of tin oxide suspensions by the "micromolding in capillary" (MIMIC) method, one of the soft lithography techniques. Usually, suspensions with high solid loadings have been experimented, but since the filling mechanism of the MIMIC method is capillary action, the viscosity increases during the process, resulting in a smaller patterning area. We have confirmed that a low solids ethanol suspension of tin oxide nanoparticle can be used to achieve large-area patterning, forming a stripe pattern with a thickness of almost 1/3 the depth of the mold channel, resulting in a dense structure. Confirming the patterning mechanism, we found that controlling solvent evaporation during the process was very effective.

権利情報:

• Creative Commons BY-NC-ND Attribution-NonCommercial-NoDerivs 4.0 International
  

キーワード: nano particle, microscale patterning, soft lithography, ceramic suspension, tin oxide

刊行年月日: 2023-04-15

出版者: 一般社団法人 粉体粉末冶金協会

掲載誌:

• 粉体および粉末冶金 (ISSN: 18809014) vol. 70 issue. 4 p. 191-196

研究助成金:

原稿種別: 出版者版 (Version of record)

MDR DOI:

公開URL: https://doi.org/10.2497/jjspm.70.191

関連資料:

その他の識別子:

連絡先:

更新時刻: 2025-01-31 12:30:28 +0900

MDRでの公開時刻: 2025-01-31 12:30:30 +0900