Search Constraints
« Previous |
1 - 100 of 596
|
Next »
Search Results
Select an image to start the slideshow
Mechanism of local hydrogen entry into Fe sheets induced by atmospheric corrosion: Significance of potential, pH, and rust layer thickness
1 of 100
Fabrication of thin-film batteries composed of LiCoO2, Li3PO4, and Li layers
2 of 100
有機アンチ・アンバイポーラトランジスタを用いた多機能論理回路
3 of 100
Growth dynamics of selective-area-grown rutile-type SnO2 on TiO2 (110) substrate
4 of 100
Multiscale Finite Element Analysis of Yield-point Phenomenon in Ferrite–Pearlite Duplex Steels
5 of 100
Minimal-surface-based multiphase metamaterials with highly variable stiffness
6 of 100
Multi-objective topology optimization of porous microstructure in die-bonding layer of a semiconductor
7 of 100
Mechanical Properties, Tissue Structure, and Elemental Composition of the Walking Leg Tips of Coconut Crabs
8 of 100
Anisotropic optical conductivity accompanied by a small energy gap in the one-dimensional thermoelectric telluride <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:mrow><mml:msub><mml:mi mathvariant="normal">Ta</mml:mi><mml:mn>4</mml:mn></mml:msub><mml:msub><mml:mi>SiTe</mml:mi><mml:mn>4</mml:mn></mml:msub></mml:mrow></mml:math>
9 of 100
Crucial role of interfacial <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:mrow><mml:mi>s</mml:mi><mml:mtext>−</mml:mtext><mml:mi>d</mml:mi></mml:mrow></mml:math> exchange interaction in the temperature dependence of tunnel magnetoresistance
10 of 100
Bias voltage effects on tunneling magnetoresistance in Fe/MgAl2O4/Fe(001) junctions: Comparative study with Fe/MgO/Fe(001) junctions
11 of 100
First-principles study of the anisotropic magneto-Peltier effect
12 of 100
First-principles study on magnetic tunneling junctions with semiconducting CuInSe2and CuGaSe2barriers
13 of 100
Giant interfacial perpendicular magnetic anisotropy in Fe/CuIn1−xGaxSe2 beyond Fe/MgO
14 of 100
Interface-driven giant tunnel magnetoresistance in (111)-oriented junctions
15 of 100
Interfacial giant tunnel magnetoresistance and bulk-induced large perpendicular magnetic anisotropy in (111)-oriented junctions with fcc ferromagnetic alloys: A first-principles study
16 of 100
Perpendicular magnetic anisotropy at the Fe/MgAl2O4 interface: Comparative first-principles study with Fe/MgO
17 of 100
Band-folding-driven high tunnel magnetoresistance ratios in (111)-oriented junctions with <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:msub><mml:mi>SrTiO</mml:mi><mml:mn>3</mml:mn></mml:msub></mml:math> barriers
18 of 100
Theoretical Study on Magnetic Tunneling Junctions with Semiconductor Barriers CuInSe<sub>2</sub> and CuGaSe<sub>2</sub> Including a Detailed Analysis of Band-Resolved Transmittances
19 of 100
Effects of time per layer and part geometry on thermal history and microcracking in the fabrication of nickel superalloy samples by laser powder bed fusion
20 of 100
Exotic magnetism in perovskite KOsO3
21 of 100
Pt/GaN Schottky barrier height lowering by incorporated hydrogen
22 of 100
High‐Temperature and High‐Electron Mobility Metal‐Oxide‐Semiconductor Field‐Effect Transistors Based on N‐Type Diamond
23 of 100
Recent Progress in Controlled Nanostructure of Colloidal Nanocrystal Powders for Efficient Light Emission
24 of 100
Chemical-substitution-driven giant anomalous Hall and Nernst effects in magnetic cubic Heusler compounds
25 of 100
Heat Source Model Development for Thermal Analysis of Laser Powder Bed Fusion Using Bayesian Optimization and Machine Learning
26 of 100
Superconducting joints using reacted multifilament MgB2 wires: A technology toward cryogen-free MRI magnets
27 of 100
Approach to Low Contact Resistance Formation on Buried Interface in Oxide Thin-Film Transistors: Utilization of Palladium-Mediated Hydrogen Pathway
28 of 100
Critical current improvement and resistance evaluation of superconducting joint between Bi2223 tapes
29 of 100
Development of a Persistent Current Mode 9.39 T (400 MHz) LTS/Bi-2223 NMR Magnet With a Bi-2223 Superconducting Joint
30 of 100
Review of the temporal stability of the magnetic field for ultra-high field superconducting magnets with a particular focus on superconducting joints between HTS conductors
31 of 100
Consideration of Magnetic Flux Distribution in Multi−Filamented YBa<sub>2</sub>Cu<sub>3</sub>O<sub>7−δ</sub> Films by Controlling Crystal Array Using Surface−Modified Substrate
32 of 100
The effect of intermediate layer densification on the critical current of a Bi-2223 superconducting joint
33 of 100
Interpretation of time-dependent current and resistance of HTS closed loop with superconducting joint considering flux creep
34 of 100
Angular Dependence of Critical Current and Grain Alignment in Bi-2223 Superconducting Joint
35 of 100
Angular dependence of resistance and critical current of a Bi-2223 superconducting joint
36 of 100
Particle Size Effect on Powder Packing Properties and Molten Pool Dimensions in Laser Powder Bed Fusion Simulation
37 of 100
Biofabrication of engineered blood vessels for biomedical applications
38 of 100
Mechanical control of molecular machines at an air–water interface: manipulation of molecular pliers, paddles
39 of 100
Visualization of spin-polarized electronic states by imaging-type spin-resolved photoemission microscopy
40 of 100
Optimum asymmetry for nanofabricated refractometric sensors at quasi-bound states in the continuum
41 of 100
Quantitative characterization of built-in potential profile across GaAs p–n junctions using Kelvin probe force microscopy with qPlus sensor AFM
42 of 100
Prominently enhanced luminescence from a continuous monolayer of transition metal dichalcogenide on all-dielectric metasurfaces
43 of 100
Solute segregation in a rapidly solidified Hastelloy-X Ni-based superalloy during laser powder bed fusion investigated by phase-field and computational thermal-fluid dynamics simulations
44 of 100
Lead‐Free Halide Perovskite Materials and Optoelectronic Devices: Progress and Prospective
45 of 100
Quantitative Characterization by Transmission Electron Microscopy and Its Application to Interfacial Phenomena in Crystalline Materials
46 of 100
Local- and Intermediate-range Partial Structure Study of As–Se Glasses
47 of 100
Atomic and Electronic Structures on a Mordenite Zeolite
48 of 100
Siliceous zeolite-derived topology of amorphous silica
49 of 100
Atomic and Electronic Structure in MgO–SiO<sub>2</sub>
50 of 100
Microstructure and thermoelectric properties of pristine and Al-doped ZnO ceramics fabricated by cost-effective and eco-friendly wet chemistry methods
51 of 100
Microgravity effects on nonequilibrium melt processing of neodymium titanate: thermophysical properties, atomic structure, glass formation and crystallization
52 of 100
Experiment and Simulation on Mechanical Behavior in 1/2-Scale Demonstration REBCO Coil System of Skeleton Cyclotron for Cancer Therapy
53 of 100
Heating rate dependence of coercivity and microstructure of Fe–B–P–Cu nanocrystalline soft magnetic materials
54 of 100
Effective Conduction Path of a C<sub>60</sub> Chain in a Nanogap Electrode
55 of 100
Ferroic order for anisotropic magnetic dipole term in collinear antiferromagnets of (t2g)4 system
56 of 100
Combinatorial characterization of metastable luminous silver cations
57 of 100
Influence of Electrical Polarization on Thrombogenicity of Titania Nanotubes
58 of 100
Analysis of Structure and Function of Ladybird Leg and Subsequent Design and Fabrication of a Simplified Leg Structure for Robotic Applications
59 of 100
Tailoring photodetection performance of selfpowered Ga2O3 UV solar-blind photodetectors through asymmetric electrodes
60 of 100
Oxygen on-site Coulomb energy in Pr1.3−xLa0.7CexCuO4 and Bi2Sr2CaCu2O8+δ and its relation with Heisenberg exchange
61 of 100
Hydrogen-triggered metal filament rupture in Cu-based resistance switches
62 of 100
Er-driven incommensurate to commensurate magnetic phase transition of Fe in the spin-chain compound <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:msub><mml:mi>BaErFeO</mml:mi><mml:mn>4</mml:mn></mml:msub></mml:math>
63 of 100
バイオセラミックス分野における標準化の取り組み 〜ISO提案を中心に
64 of 100
Design and Observation of Topological Band Gaps and Edge Modes of SOI Photonic Crystal Slabs in the Mid-Infrared Range
65 of 100
水素センシングおよび物質への吸蔵現象の理論的解釈
66 of 100
Cell-derived nanomaterials for biomedical applications
67 of 100
アパタイト系リン酸カルシウム生体材料の高機能化と新展開
68 of 100
Precipitation behavior of the M23C6 phase on the coherent twin boundary of 25Cr-20Ni-Nb-N steel
69 of 100
Influences of combined supplementation of calcium citrate and calcium carbonate on injectable and anti-washout hydroxyapatite/collagen bone paste utilizing sodium alginate
70 of 100
バイオセラミックスの標準化
71 of 100
Development of novel bone‐like nanocomposite coating of hydroxyapatite/collagen on titanium by modified electrophoretic deposition
72 of 100
Changes in fluoride removal ability of chicken bone char with changes in calcination time
73 of 100
Developments of calcium phosphate-based bone regenerating materials utilizing interfacial interactions between inorganic–organic substances
74 of 100
Constancy of the quadrupolar interaction product in nanocrystalline gallium nitride revealed by 71Ga MAS NMR shift distribution
75 of 100
Self-healing and shape-memory polymers based on cellulose acetate matrix
76 of 100
Mild selective photochemical oxidation of an organic sulfide using OxP-polyimide porous polymers as singlet oxygen generators
77 of 100
Fabrication of Gentamicin-Loaded Hydroxyapatite/Collagen Bone-Like Nanocomposite for Anti-Infection Bone Void Fillers
78 of 100
Ion-pairing assemblies of π-extended anion-responsive organoplatinum complexes
79 of 100
Linear response theories for interatomic exchange interactions
80 of 100
Preparation of anti-decay self-setting pastes of hydroxyapatite/collagen utilizing (3-glycidoxypropyl)trimethoxysilane
81 of 100
Validity check of easy-to-use torsion test method for bioceramics
82 of 100
Preparation of injectable hydroxyapatite/collagen paste using sodium alginate and influence of additives
83 of 100
Regulating the trap distribution of ZnGa2O4:Cr3+ by Li+ /Ga3+ doping for upconversion-like trap energy transfer NIR persistent luminescence
84 of 100
Identification of Multiple Cs+ Adsorption Sites in a Hydroxy-interlayered Vermiculite-like Layered Silicate through 133Cs MAS NMR Analysis
85 of 100
Chemical Interaction in β-Tricalcium Phosphate / Copolymerized Poly-L-Lactide Composites
86 of 100
Boosting areal capacitance in WO3-based supercapacitor materials by stacking nanoporous composite films
87 of 100
Oxygen – a fatal impurity for reversible magnesium deposition/dissolution
88 of 100
Local defect and mid-gap state analysis of GaN using monochromated EELS combined with nanodiffraction and atomic-resolution imaging
89 of 100
Suppression of Inhomogeneous Plastic Deformation in Medium-Carbon Tempered Martensite Steel
90 of 100
Suppression of High Threshold Voltage for Boron-Doped Diamond MOSFETs
91 of 100
Visualization and evaluation of lithium diffusion at grain boundaries in Li<sub>0.29</sub>La<sub>0.57</sub>TiO<sub>3</sub> solid electrolytes using secondary ion mass spectrometry
92 of 100
Atomic position and the chemical state of an active Sn dopant for Sn-doped β-Ga2O3(001)
93 of 100
Understanding Complex Interplay among Different Instabilities in Multiferroic BiMn7O12 Using 57Fe Probe Mössbauer Spectroscopy
94 of 100
Effect of defects on Q factors of single-crystal diamond MEMS resonators
95 of 100
Mg–Zn–Cl-Integrated Functional Interface for Enhancing the Cycle Life of Mg Electrodes
96 of 100
Large-scale DFT calculations of multi-component glass systems (SiO2)0.70(Al2O3)0.13(XO)0.17 (X = Mg, Ca, Sr, Ba) : Accuracy of classical force fields
97 of 100
2023 Roadmap on molecular modelling of electrochemical energy materials
98 of 100
A Rhombic Dodecahedral Honeycomb Structure with Cation Vacancy Ordering in a !‑Ga2O3 Crystal
99 of 100
Element discrimination in a hexagonal boron nitride nanosheet by aberration corrected transmission electron microscopy
100 of 100