Search Constraints
« Previous |
1 - 20 of 124
|
Next »
Search Results
Select an image to start the slideshow
DATA SHEET ON GIGA-CYCLE FATIGUE PROPERTIES OF A7075-T6 (Al-5.6Zn-2.5Mg-1.6Cu) ALUMINIUM ALLOY
1 of 20
DATA SHEET ON LOW-AND HIGH-CYCLE FATIGUE PROPERTIES OF SUS329J3L (22Cr-5Ni-3Mo) DUPLEX STAINLESS STEEL
2 of 20
DATA SHEET ON LOW-AND HIGH-CYCLE FATIGUE PROPERTIES OF A7075-T6 (Al-5.6Zn-2.5Mg-1.6Cu) ALUMINIUM ALLOY
3 of 20
DATA SHEET ON GIGA-CYCLE FATIGUE PROPERTIES OFSUS630(16Cr-4Ni-4Cu) STAINLESS STEEL AT HIGH STRESS RATIOS
4 of 20
DATA SHEET ON GIGA-CYCLE FATIGUE PROPERTIES OF A5083P-O (Al-4.5Mg-0.6Mn) ALUMINUM ALLOY PLATES AT HIGH STRESS RATIOS
5 of 20
DATA SHEET ON GIGA-CYCLE FATIGUE PROPERTIES OF SUS630(16Cr-4Ni-4Cu) STAINLESS STEEL
6 of 20
DATA SHEET ON GIGA-CYCLE FATIGUE PROPERTIES OF A5083P-O (Al-4.5Mg-0.6Mn) ALUMINIUM ALLOY PLATES
7 of 20
DATA SHEET ON LOW-AND HIGH-CYCLE FATIGUE PROPERTIES OF SUS630(16Cr-4Ni-4Cu) STAINLESS STEEL
8 of 20
DATA SHEET ON GIGA-CYCLEFATIGUE PROPERTIES OF FCD400 AND FCD800 SPHEROIDAL GRAPHITE CAST IRON
9 of 20
DATA SHEET ON GIGA-CYCLE FATIGUE PROPERTIES OF HYDROGEN CHRGED SCM440(0.4C-ICr-O.2Mo) STEEL FOR MACHINE STRUCTURAL USE
10 of 20
DATA SHEET ON GIGA-CYCLE FATIGUE PROPERTIES OF Ti-6Al-4V eli (900MPa CLASS) TITANIUM ALLOY AT HIGH STRESS RATIOS
11 of 20
DATA SHEET ON FATIGUE PROPERTIES OF NON-LOAD-CARRYING CRUCIFORM WELDED JOINTS OF SM490B ROLLED STEEL FOR WELDED STRUCTURE - Effect of Plate Thickness (Part 4, Thickness 40 mm) -
12 of 20
DATA SHEET ON LONG-TERM, HIGH TEMPERATURE LOW-CYCLE FATIGUE PROPERTIES OF NW6617 (Ni-22Cr-12Co-9Mo) NICKEL ALLOY PLATE
13 of 20
DATA SHEET ON GIGA-CYCLE FATIGUE PROPERTIES OF SUJ2 (Fe-1C-1.5Cr) STEEL FOR BEARINGS
14 of 20
DATA SHEET ON GIGA-CYCLE FATIGUE PROPERTIES OF Ti-6Al-4V (900MPa CLASS) TITANIUM ALLOY AT HIGH STRESS RATIOS
15 of 20
DATA SHEET ON FATIGUE PROPERTIES OF EXTRUDED AZ61(Mg-6Al-1Zn) AND AZ31(Mg-3Al-1Zn) MAGNESIUM ALLOYS
16 of 20
DATA SHEET ON LONG-TERM, HIGH TEMPERATURE LOW-CYCLE FATIGUE PROPERTIES OF NCF800H (21Cr-32Ni-Ti-Al) CORROSION-RESISTING AND HEAT-RESISTING ALLOY PLATE
17 of 20
DATA SHEET ON FATIGUE PROPERTIES OF NON-LOAD-CARRYING CRUCIFORM WELDED JOINTS OF SM490B ROLLED STEEL FOR WELDED STRUCTURE - Effect of Plate Thickness (Part 3, Thickness 80 mm) -
18 of 20
DATA SHEET ON GIGA-CYCLE FATIGUE PROPERTIES OF Ti-6Al-4V ELI (1100MPa CLASS) TITANIUM ALLOY
19 of 20
DATA SHEET ON ULTRASONIC FATIGUE PROPERTIES OF SCM440(0.40C-1Cr-0.2Mo) STEEL FOR MACHINE STRUCTURAL USE
20 of 20